Filtered by vendor Linux
Subscriptions
Total
17394 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23304 | 1 Linux | 1 Linux Kernel | 2026-03-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fix NULL pointer deref in ip6_rt_get_dev_rcu() l3mdev_master_dev_rcu() can return NULL when the slave device is being un-slaved from a VRF. All other callers deal with this, but we lost the fallback to loopback in ip6_rt_pcpu_alloc() -> ip6_rt_get_dev_rcu() with commit 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address"). KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:ip6_rt_pcpu_alloc (net/ipv6/route.c:1418) Call Trace: ip6_pol_route (net/ipv6/route.c:2318) fib6_rule_lookup (net/ipv6/fib6_rules.c:115) ip6_route_output_flags (net/ipv6/route.c:2607) vrf_process_v6_outbound (drivers/net/vrf.c:437) I was tempted to rework the un-slaving code to clear the flag first and insert synchronize_rcu() before we remove the upper. But looks like the explicit fallback to loopback_dev is an established pattern. And I guess avoiding the synchronize_rcu() is nice, too. | ||||
| CVE-2026-23309 | 1 Linux | 1 Linux Kernel | 2026-03-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Add NULL pointer check to trigger_data_free() If trigger_data_alloc() fails and returns NULL, event_hist_trigger_parse() jumps to the out_free error path. While kfree() safely handles a NULL pointer, trigger_data_free() does not. This causes a NULL pointer dereference in trigger_data_free() when evaluating data->cmd_ops->set_filter. Fix the problem by adding a NULL pointer check to trigger_data_free(). The problem was found by an experimental code review agent based on gemini-3.1-pro while reviewing backports into v6.18.y. | ||||
| CVE-2026-23313 | 1 Linux | 1 Linux Kernel | 2026-03-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i40e: Fix preempt count leak in napi poll tracepoint Using get_cpu() in the tracepoint assignment causes an obvious preempt count leak because nothing invokes put_cpu() to undo it: softirq: huh, entered softirq 3 NET_RX with preempt_count 00000100, exited with 00000101? This clearly has seen a lot of testing in the last 3+ years... Use smp_processor_id() instead. | ||||
| CVE-2026-23314 | 1 Linux | 1 Linux Kernel | 2026-03-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: regulator: bq257xx: Fix device node reference leak in bq257xx_reg_dt_parse_gpio() In bq257xx_reg_dt_parse_gpio(), if fails to get subchild, it returns without calling of_node_put(child), causing the device node reference leak. | ||||
| CVE-2026-23320 | 1 Linux | 1 Linux Kernel | 2026-03-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: align net_device lifecycle with bind/unbind Currently, the net_device is allocated in ncm_alloc_inst() and freed in ncm_free_inst(). This ties the network interface's lifetime to the configuration instance rather than the USB connection (bind/unbind). This decoupling causes issues when the USB gadget is disconnected where the underlying gadget device is removed. The net_device can outlive its parent, leading to dangling sysfs links and NULL pointer dereferences when accessing the freed gadget device. Problem 1: NULL pointer dereference on disconnect Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: __pi_strlen+0x14/0x150 rtnl_fill_ifinfo+0x6b4/0x708 rtmsg_ifinfo_build_skb+0xd8/0x13c rtmsg_ifinfo+0x50/0xa0 __dev_notify_flags+0x4c/0x1f0 dev_change_flags+0x54/0x70 do_setlink+0x390/0xebc rtnl_newlink+0x7d0/0xac8 rtnetlink_rcv_msg+0x27c/0x410 netlink_rcv_skb+0x134/0x150 rtnetlink_rcv+0x18/0x28 netlink_unicast+0x254/0x3f0 netlink_sendmsg+0x2e0/0x3d4 Problem 2: Dangling sysfs symlinks console:/ # ls -l /sys/class/net/ncm0 lrwxrwxrwx ... /sys/class/net/ncm0 -> /sys/devices/platform/.../gadget.0/net/ncm0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/ncm0 ls: .../gadget.0/net/ncm0: No such file or directory Move the net_device allocation to ncm_bind() and deallocation to ncm_unbind(). This ensures the network interface exists only when the gadget function is actually bound to a configuration. To support pre-bind configuration (e.g., setting interface name or MAC address via configfs), cache user-provided options in f_ncm_opts using the gether_opts structure. Apply these cached settings to the net_device upon creation in ncm_bind(). Preserve the use-after-free fix from commit 6334b8e4553c ("usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error"). Check opts->net in ncm_set_alt() and ncm_disable() to ensure gether_disconnect() runs only if a connection was established. | ||||
| CVE-2026-23328 | 1 Linux | 1 Linux Kernel | 2026-03-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix NULL pointer dereference of mgmt_chann mgmt_chann may be set to NULL if the firmware returns an unexpected error in aie2_send_mgmt_msg_wait(). This can later lead to a NULL pointer dereference in aie2_hw_stop(). Fix this by introducing a dedicated helper to destroy mgmt_chann and by adding proper NULL checks before accessing it. | ||||
| CVE-2026-23332 | 1 Linux | 1 Linux Kernel | 2026-03-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: intel_pstate: Fix crash during turbo disable When the system is booted with kernel command line argument "nosmt" or "maxcpus" to limit the number of CPUs, disabling turbo via: echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo results in a crash: PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI ... RIP: 0010:store_no_turbo+0x100/0x1f0 ... This occurs because for_each_possible_cpu() returns CPUs even if they are not online. For those CPUs, all_cpu_data[] will be NULL. Since commit 973207ae3d7c ("cpufreq: intel_pstate: Rearrange max frequency updates handling code"), all_cpu_data[] is dereferenced even for CPUs which are not online, causing the NULL pointer dereference. To fix that, pass CPU number to intel_pstate_update_max_freq() and use all_cpu_data[] for those CPUs for which there is a valid cpufreq policy. | ||||
| CVE-2026-23335 | 1 Linux | 1 Linux Kernel | 2026-03-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix kernel stack leak in irdma_create_user_ah() struct irdma_create_ah_resp { // 8 bytes, no padding __u32 ah_id; // offset 0 - SET (uresp.ah_id = ah->sc_ah.ah_info.ah_idx) __u8 rsvd[4]; // offset 4 - NEVER SET <- LEAK }; rsvd[4]: 4 bytes of stack memory leaked unconditionally. Only ah_id is assigned before ib_respond_udata(). The reserved members of the structure were not zeroed. | ||||
| CVE-2026-23341 | 1 Linux | 1 Linux Kernel | 2026-03-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix crash when destroying a suspended hardware context If userspace issues an ioctl to destroy a hardware context that has already been automatically suspended, the driver may crash because the mailbox channel pointer is NULL for the suspended context. Fix this by checking the mailbox channel pointer in aie2_destroy_context() before accessing it. | ||||
| CVE-2026-23347 | 1 Linux | 1 Linux Kernel | 2026-03-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: usb: f81604: correctly anchor the urb in the read bulk callback When submitting an urb, that is using the anchor pattern, it needs to be anchored before submitting it otherwise it could be leaked if usb_kill_anchored_urbs() is called. This logic is correctly done elsewhere in the driver, except in the read bulk callback so do that here also. | ||||
| CVE-2026-23352 | 1 Linux | 1 Linux Kernel | 2026-03-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/efi: defer freeing of boot services memory efi_free_boot_services() frees memory occupied by EFI_BOOT_SERVICES_CODE and EFI_BOOT_SERVICES_DATA using memblock_free_late(). There are two issue with that: memblock_free_late() should be used for memory allocated with memblock_alloc() while the memory reserved with memblock_reserve() should be freed with free_reserved_area(). More acutely, with CONFIG_DEFERRED_STRUCT_PAGE_INIT=y efi_free_boot_services() is called before deferred initialization of the memory map is complete. Benjamin Herrenschmidt reports that this causes a leak of ~140MB of RAM on EC2 t3a.nano instances which only have 512MB or RAM. If the freed memory resides in the areas that memory map for them is still uninitialized, they won't be actually freed because memblock_free_late() calls memblock_free_pages() and the latter skips uninitialized pages. Using free_reserved_area() at this point is also problematic because __free_page() accesses the buddy of the freed page and that again might end up in uninitialized part of the memory map. Delaying the entire efi_free_boot_services() could be problematic because in addition to freeing boot services memory it updates efi.memmap without any synchronization and that's undesirable late in boot when there is concurrency. More robust approach is to only defer freeing of the EFI boot services memory. Split efi_free_boot_services() in two. First efi_unmap_boot_services() collects ranges that should be freed into an array then efi_free_boot_services() later frees them after deferred init is complete. | ||||
| CVE-2026-23363 | 1 Linux | 1 Linux Kernel | 2026-03-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: Fix possible oob access in mt7925_mac_write_txwi_80211() Check frame length before accessing the mgmt fields in mt7925_mac_write_txwi_80211 in order to avoid a possible oob access. | ||||
| CVE-2026-23366 | 1 Linux | 1 Linux Kernel | 2026-03-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/client: Do not destroy NULL modes 'modes' in drm_client_modeset_probe may fail to kcalloc. If this occurs, we jump to 'out', calling modes_destroy on it, which dereferences it. This may result in a NULL pointer dereference in the error case. Prevent that. | ||||
| CVE-2026-23369 | 1 Linux | 1 Linux Kernel | 2026-03-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: i801: Revert "i2c: i801: replace acpi_lock with I2C bus lock" This reverts commit f707d6b9e7c18f669adfdb443906d46cfbaaa0c1. Under rare circumstances, multiple udev threads can collect i801 device info on boot and walk i801_acpi_io_handler somewhat concurrently. The first will note the area is reserved by acpi to prevent further touches. This ultimately causes the area to be deregistered. The second will enter i801_acpi_io_handler after the area is unregistered but before a check can be made that the area is unregistered. i2c_lock_bus relies on the now unregistered area containing lock_ops to lock the bus. The end result is a kernel panic on boot with the following backtrace; [ 14.971872] ioatdma 0000:09:00.2: enabling device (0100 -> 0102) [ 14.971873] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 14.971880] #PF: supervisor read access in kernel mode [ 14.971884] #PF: error_code(0x0000) - not-present page [ 14.971887] PGD 0 P4D 0 [ 14.971894] Oops: 0000 [#1] PREEMPT SMP PTI [ 14.971900] CPU: 5 PID: 956 Comm: systemd-udevd Not tainted 5.14.0-611.5.1.el9_7.x86_64 #1 [ 14.971905] Hardware name: XXXXXXXXXXXXXXXXXXXXXXX BIOS 1.20.10.SV91 01/30/2023 [ 14.971908] RIP: 0010:i801_acpi_io_handler+0x2d/0xb0 [i2c_i801] [ 14.971929] Code: 00 00 49 8b 40 20 41 57 41 56 4d 8b b8 30 04 00 00 49 89 ce 41 55 41 89 d5 41 54 49 89 f4 be 02 00 00 00 55 4c 89 c5 53 89 fb <48> 8b 00 4c 89 c7 e8 18 61 54 e9 80 bd 80 04 00 00 00 75 09 4c 3b [ 14.971933] RSP: 0018:ffffbaa841483838 EFLAGS: 00010282 [ 14.971938] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9685e01ba568 [ 14.971941] RDX: 0000000000000008 RSI: 0000000000000002 RDI: 0000000000000000 [ 14.971944] RBP: ffff9685ca22f028 R08: ffff9685ca22f028 R09: ffff9685ca22f028 [ 14.971948] R10: 000000000000000b R11: 0000000000000580 R12: 0000000000000580 [ 14.971951] R13: 0000000000000008 R14: ffff9685e01ba568 R15: ffff9685c222f000 [ 14.971954] FS: 00007f8287c0ab40(0000) GS:ffff96a47f940000(0000) knlGS:0000000000000000 [ 14.971959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 14.971963] CR2: 0000000000000000 CR3: 0000000168090001 CR4: 00000000003706f0 [ 14.971966] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 14.971968] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 14.971972] Call Trace: [ 14.971977] <TASK> [ 14.971981] ? show_trace_log_lvl+0x1c4/0x2df [ 14.971994] ? show_trace_log_lvl+0x1c4/0x2df [ 14.972003] ? acpi_ev_address_space_dispatch+0x16e/0x3c0 [ 14.972014] ? __die_body.cold+0x8/0xd [ 14.972021] ? page_fault_oops+0x132/0x170 [ 14.972028] ? exc_page_fault+0x61/0x150 [ 14.972036] ? asm_exc_page_fault+0x22/0x30 [ 14.972045] ? i801_acpi_io_handler+0x2d/0xb0 [i2c_i801] [ 14.972061] acpi_ev_address_space_dispatch+0x16e/0x3c0 [ 14.972069] ? __pfx_i801_acpi_io_handler+0x10/0x10 [i2c_i801] [ 14.972085] acpi_ex_access_region+0x5b/0xd0 [ 14.972093] acpi_ex_field_datum_io+0x73/0x2e0 [ 14.972100] acpi_ex_read_data_from_field+0x8e/0x230 [ 14.972106] acpi_ex_resolve_node_to_value+0x23d/0x310 [ 14.972114] acpi_ds_evaluate_name_path+0xad/0x110 [ 14.972121] acpi_ds_exec_end_op+0x321/0x510 [ 14.972127] acpi_ps_parse_loop+0xf7/0x680 [ 14.972136] acpi_ps_parse_aml+0x17a/0x3d0 [ 14.972143] acpi_ps_execute_method+0x137/0x270 [ 14.972150] acpi_ns_evaluate+0x1f4/0x2e0 [ 14.972158] acpi_evaluate_object+0x134/0x2f0 [ 14.972164] acpi_evaluate_integer+0x50/0xe0 [ 14.972173] ? vsnprintf+0x24b/0x570 [ 14.972181] acpi_ac_get_state.part.0+0x23/0x70 [ 14.972189] get_ac_property+0x4e/0x60 [ 14.972195] power_supply_show_property+0x90/0x1f0 [ 14.972205] add_prop_uevent+0x29/0x90 [ 14.972213] power_supply_uevent+0x109/0x1d0 [ 14.972222] dev_uevent+0x10e/0x2f0 [ 14.972228] uevent_show+0x8e/0x100 [ 14.972236] dev_attr_show+0x19 ---truncated--- | ||||
| CVE-2026-23383 | 1 Linux | 1 Linux Kernel | 2026-03-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing struct bpf_plt contains a u64 target field. Currently, the BPF JIT allocator requests an alignment of 4 bytes (sizeof(u32)) for the JIT buffer. Because the base address of the JIT buffer can be 4-byte aligned (e.g., ending in 0x4 or 0xc), the relative padding logic in build_plt() fails to ensure that target lands on an 8-byte boundary. This leads to two issues: 1. UBSAN reports misaligned-access warnings when dereferencing the structure. 2. More critically, target is updated concurrently via WRITE_ONCE() in bpf_arch_text_poke() while the JIT'd code executes ldr. On arm64, 64-bit loads/stores are only guaranteed to be single-copy atomic if they are 64-bit aligned. A misaligned target risks a torn read, causing the JIT to jump to a corrupted address. Fix this by increasing the allocation alignment requirement to 8 bytes (sizeof(u64)) in bpf_jit_binary_pack_alloc(). This anchors the base of the JIT buffer to an 8-byte boundary, allowing the relative padding math in build_plt() to correctly align the target field. | ||||
| CVE-2026-23387 | 1 Linux | 1 Linux Kernel | 2026-03-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: cirrus: cs42l43: Fix double-put in cs42l43_pin_probe() devm_add_action_or_reset() already invokes the action on failure, so the explicit put causes a double-put. | ||||
| CVE-2026-23391 | 1 Linux | 1 Linux Kernel | 2026-03-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_CT: drop pending enqueued packets on template removal Templates refer to objects that can go away while packets are sitting in nfqueue refer to: - helper, this can be an issue on module removal. - timeout policy, nfnetlink_cttimeout might remove it. The use of templates with zone and event cache filter are safe, since this just copies values. Flush these enqueued packets in case the template rule gets removed. | ||||
| CVE-2026-23317 | 1 Linux | 1 Linux Kernel | 2026-03-26 | 5.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Return the correct value in vmw_translate_ptr functions Before the referenced fixes these functions used a lookup function that returned a pointer. This was changed to another lookup function that returned an error code with the pointer becoming an out parameter. The error path when the lookup failed was not changed to reflect this change and the code continued to return the PTR_ERR of the now uninitialized pointer. This could cause the vmw_translate_ptr functions to return success when they actually failed causing further uninitialized and OOB accesses. | ||||
| CVE-2026-23359 | 1 Linux | 1 Linux Kernel | 2026-03-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stack-out-of-bounds write in devmap get_upper_ifindexes() iterates over all upper devices and writes their indices into an array without checking bounds. Also the callers assume that the max number of upper devices is MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack, but that assumption is not correct and the number of upper devices could be larger than MAX_NEST_DEV (e.g., many macvlans), causing a stack-out-of-bounds write. Add a max parameter to get_upper_ifindexes() to avoid the issue. When there are too many upper devices, return -EOVERFLOW and abort the redirect. To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS. Then send a packet to the device to trigger the XDP redirect path. | ||||
| CVE-2026-23375 | 1 Linux | 1 Linux Kernel | 2026-03-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: thp: deny THP for files on anonymous inodes file_thp_enabled() incorrectly allows THP for files on anonymous inodes (e.g. guest_memfd and secretmem). These files are created via alloc_file_pseudo(), which does not call get_write_access() and leaves inode->i_writecount at 0. Combined with S_ISREG(inode->i_mode) being true, they appear as read-only regular files when CONFIG_READ_ONLY_THP_FOR_FS is enabled, making them eligible for THP collapse. Anonymous inodes can never pass the inode_is_open_for_write() check since their i_writecount is never incremented through the normal VFS open path. The right thing to do is to exclude them from THP eligibility altogether, since CONFIG_READ_ONLY_THP_FOR_FS was designed for real filesystem files (e.g. shared libraries), not for pseudo-filesystem inodes. For guest_memfd, this allows khugepaged and MADV_COLLAPSE to create large folios in the page cache via the collapse path, but the guest_memfd fault handler does not support large folios. This triggers WARN_ON_ONCE(folio_test_large(folio)) in kvm_gmem_fault_user_mapping(). For secretmem, collapse_file() tries to copy page contents through the direct map, but secretmem pages are removed from the direct map. This can result in a kernel crash: BUG: unable to handle page fault for address: ffff88810284d000 RIP: 0010:memcpy_orig+0x16/0x130 Call Trace: collapse_file hpage_collapse_scan_file madvise_collapse Secretmem is not affected by the crash on upstream as the memory failure recovery handles the failed copy gracefully, but it still triggers confusing false memory failure reports: Memory failure: 0x106d96f: recovery action for clean unevictable LRU page: Recovered Check IS_ANON_FILE(inode) in file_thp_enabled() to deny THP for all anonymous inode files. | ||||