Filtered by vendor Redhat
Subscriptions
Filtered by product Enterprise Linux
Subscriptions
Total
15491 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2021-28861 | 3 Fedoraproject, Python, Redhat | 4 Fedora, Python, Enterprise Linux and 1 more | 2024-11-21 | 7.4 High |
| Python 3.x through 3.10 has an open redirection vulnerability in lib/http/server.py due to no protection against multiple (/) at the beginning of URI path which may leads to information disclosure. NOTE: this is disputed by a third party because the http.server.html documentation page states "Warning: http.server is not recommended for production. It only implements basic security checks." | ||||
| CVE-2021-28678 | 3 Fedoraproject, Python, Redhat | 3 Fedora, Pillow, Enterprise Linux | 2024-11-21 | 5.5 Medium |
| An issue was discovered in Pillow before 8.2.0. For BLP data, BlpImagePlugin did not properly check that reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be run a large number of times on empty data. | ||||
| CVE-2021-28677 | 3 Fedoraproject, Python, Redhat | 3 Fedora, Pillow, Enterprise Linux | 2024-11-21 | 7.5 High |
| An issue was discovered in Pillow before 8.2.0. For EPS data, the readline implementation used in EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use this to perform a DoS of Pillow in the open phase, before an image was accepted for opening. | ||||
| CVE-2021-28676 | 3 Fedoraproject, Python, Redhat | 3 Fedora, Pillow, Enterprise Linux | 2024-11-21 | 7.5 High |
| An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load. | ||||
| CVE-2021-28675 | 3 Fedoraproject, Python, Redhat | 3 Fedora, Pillow, Enterprise Linux | 2024-11-21 | 5.5 Medium |
| An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the number of input layers relative to the size of the data block. This could lead to a DoS on Image.open prior to Image.load. | ||||
| CVE-2021-28662 | 4 Debian, Fedoraproject, Redhat and 1 more | 4 Debian Linux, Fedora, Enterprise Linux and 1 more | 2024-11-21 | 6.5 Medium |
| An issue was discovered in Squid 4.x before 4.15 and 5.x before 5.0.6. If a remote server sends a certain response header over HTTP or HTTPS, there is a denial of service. This header can plausibly occur in benign network traffic. | ||||
| CVE-2021-28652 | 4 Debian, Fedoraproject, Redhat and 1 more | 4 Debian Linux, Fedora, Enterprise Linux and 1 more | 2024-11-21 | 4.9 Medium |
| An issue was discovered in Squid before 4.15 and 5.x before 5.0.6. Due to incorrect parser validation, it allows a Denial of Service attack against the Cache Manager API. This allows a trusted client to trigger memory leaks that. over time, lead to a Denial of Service via an unspecified short query string. This attack is limited to clients with Cache Manager API access privilege. | ||||
| CVE-2021-28651 | 5 Debian, Fedoraproject, Netapp and 2 more | 5 Debian Linux, Fedora, Cloud Manager and 2 more | 2024-11-21 | 7.5 High |
| An issue was discovered in Squid before 4.15 and 5.x before 5.0.6. Due to a buffer-management bug, it allows a denial of service. When resolving a request with the urn: scheme, the parser leaks a small amount of memory. However, there is an unspecified attack methodology that can easily trigger a large amount of memory consumption. | ||||
| CVE-2021-28650 | 3 Fedoraproject, Gnome, Redhat | 3 Fedora, Gnome-autoar, Enterprise Linux | 2024-11-21 | 5.5 Medium |
| autoar-extractor.c in GNOME gnome-autoar before 0.3.1, as used by GNOME Shell, Nautilus, and other software, allows Directory Traversal during extraction because it lacks a check of whether a file's parent is a symlink in certain complex situations. NOTE: this issue exists because of an incomplete fix for CVE-2020-36241. | ||||
| CVE-2021-28211 | 2 Redhat, Tianocore | 2 Enterprise Linux, Edk2 | 2024-11-21 | 6.7 Medium |
| A heap overflow in LzmaUefiDecompressGetInfo function in EDK II. | ||||
| CVE-2021-28210 | 2 Redhat, Tianocore | 2 Enterprise Linux, Edk2 | 2024-11-21 | 7.8 High |
| An unlimited recursion in DxeCore in EDK II. | ||||
| CVE-2021-28153 | 5 Broadcom, Debian, Fedoraproject and 2 more | 5 Brocade Fabric Operating System Firmware, Debian Linux, Fedora and 2 more | 2024-11-21 | 5.3 Medium |
| An issue was discovered in GNOME GLib before 2.66.8. When g_file_replace() is used with G_FILE_CREATE_REPLACE_DESTINATION to replace a path that is a dangling symlink, it incorrectly also creates the target of the symlink as an empty file, which could conceivably have security relevance if the symlink is attacker-controlled. (If the path is a symlink to a file that already exists, then the contents of that file correctly remain unchanged.) | ||||
| CVE-2021-28116 | 4 Debian, Fedoraproject, Redhat and 1 more | 4 Debian Linux, Fedora, Enterprise Linux and 1 more | 2024-11-21 | 3.7 Low |
| Squid through 4.14 and 5.x through 5.0.5, in some configurations, allows information disclosure because of an out-of-bounds read in WCCP protocol data. This can be leveraged as part of a chain for remote code execution as nobody. | ||||
| CVE-2021-28091 | 4 Debian, Entrouvert, Fedoraproject and 1 more | 4 Debian Linux, Lasso, Fedora and 1 more | 2024-11-21 | 7.5 High |
| Lasso all versions prior to 2.7.0 has improper verification of a cryptographic signature. | ||||
| CVE-2021-27928 | 5 Debian, Galeracluster, Mariadb and 2 more | 8 Debian Linux, Wsrep, Mariadb and 5 more | 2024-11-21 | 7.2 High |
| A remote code execution issue was discovered in MariaDB 10.2 before 10.2.37, 10.3 before 10.3.28, 10.4 before 10.4.18, and 10.5 before 10.5.9; Percona Server through 2021-03-03; and the wsrep patch through 2021-03-03 for MySQL. An untrusted search path leads to eval injection, in which a database SUPER user can execute OS commands after modifying wsrep_provider and wsrep_notify_cmd. NOTE: this does not affect an Oracle product. | ||||
| CVE-2021-27918 | 2 Golang, Redhat | 4 Go, Enterprise Linux, Openshift Container Storage and 1 more | 2024-11-21 | 7.5 High |
| encoding/xml in Go before 1.15.9 and 1.16.x before 1.16.1 has an infinite loop if a custom TokenReader (for xml.NewTokenDecoder) returns EOF in the middle of an element. This can occur in the Decode, DecodeElement, or Skip method. | ||||
| CVE-2021-27803 | 4 Debian, Fedoraproject, Redhat and 1 more | 5 Debian Linux, Fedora, Enterprise Linux and 2 more | 2024-11-21 | 7.5 High |
| A vulnerability was discovered in how p2p/p2p_pd.c in wpa_supplicant before 2.10 processes P2P (Wi-Fi Direct) provision discovery requests. It could result in denial of service or other impact (potentially execution of arbitrary code), for an attacker within radio range. | ||||
| CVE-2021-27365 | 5 Debian, Linux, Netapp and 2 more | 12 Debian Linux, Linux Kernel, Solidfire Baseboard Management Controller and 9 more | 2024-11-21 | 7.8 High |
| An issue was discovered in the Linux kernel through 5.11.3. Certain iSCSI data structures do not have appropriate length constraints or checks, and can exceed the PAGE_SIZE value. An unprivileged user can send a Netlink message that is associated with iSCSI, and has a length up to the maximum length of a Netlink message. | ||||
| CVE-2021-27364 | 6 Canonical, Debian, Linux and 3 more | 13 Ubuntu Linux, Debian Linux, Linux Kernel and 10 more | 2024-11-21 | 7.1 High |
| An issue was discovered in the Linux kernel through 5.11.3. drivers/scsi/scsi_transport_iscsi.c is adversely affected by the ability of an unprivileged user to craft Netlink messages. | ||||
| CVE-2021-27363 | 4 Debian, Linux, Netapp and 1 more | 10 Debian Linux, Linux Kernel, Cloud Backup and 7 more | 2024-11-21 | 4.4 Medium |
| An issue was discovered in the Linux kernel through 5.11.3. A kernel pointer leak can be used to determine the address of the iscsi_transport structure. When an iSCSI transport is registered with the iSCSI subsystem, the transport's handle is available to unprivileged users via the sysfs file system, at /sys/class/iscsi_transport/$TRANSPORT_NAME/handle. When read, the show_transport_handle function (in drivers/scsi/scsi_transport_iscsi.c) is called, which leaks the handle. This handle is actually the pointer to an iscsi_transport struct in the kernel module's global variables. | ||||