Total
331633 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23079 | 1 Linux | 1 Linux Kernel | 2026-02-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: cdev: Fix resource leaks on errors in lineinfo_changed_notify() On error handling paths, lineinfo_changed_notify() doesn't free the allocated resources which results leaks. Fix it. | ||||
| CVE-2026-23077 | 1 Linux | 1 Linux Kernel | 2026-02-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted merge Patch series "mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted merge", v2. Commit 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA merges") introduced the ability to merge previously unavailable VMA merge scenarios. However, it is handling merges incorrectly when it comes to mremap() of a faulted VMA adjacent to an unfaulted VMA. The issues arise in three cases: 1. Previous VMA unfaulted: copied -----| v |-----------|.............| | unfaulted |(faulted VMA)| |-----------|.............| prev 2. Next VMA unfaulted: copied -----| v |.............|-----------| |(faulted VMA)| unfaulted | |.............|-----------| next 3. Both adjacent VMAs unfaulted: copied -----| v |-----------|.............|-----------| | unfaulted |(faulted VMA)| unfaulted | |-----------|.............|-----------| prev next This series fixes each of these cases, and introduces self tests to assert that the issues are corrected. I also test a further case which was already handled, to assert that my changes continues to correctly handle it: 4. prev unfaulted, next faulted: copied -----| v |-----------|.............|-----------| | unfaulted |(faulted VMA)| faulted | |-----------|.............|-----------| prev next This bug was discovered via a syzbot report, linked to in the first patch in the series, I confirmed that this series fixes the bug. I also discovered that we are failing to check that the faulted VMA was not forked when merging a copied VMA in cases 1-3 above, an issue this series also addresses. I also added self tests to assert that this is resolved (and confirmed that the tests failed prior to this). I also cleaned up vma_expand() as part of this work, renamed vma_had_uncowed_parents() to vma_is_fork_child() as the previous name was unduly confusing, and simplified the comments around this function. This patch (of 4): Commit 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA merges") introduced the ability to merge previously unavailable VMA merge scenarios. The key piece of logic introduced was the ability to merge a faulted VMA immediately next to an unfaulted VMA, which relies upon dup_anon_vma() to correctly handle anon_vma state. In the case of the merge of an existing VMA (that is changing properties of a VMA and then merging if those properties are shared by adjacent VMAs), dup_anon_vma() is invoked correctly. However in the case of the merge of a new VMA, a corner case peculiar to mremap() was missed. The issue is that vma_expand() only performs dup_anon_vma() if the target (the VMA that will ultimately become the merged VMA): is not the next VMA, i.e. the one that appears after the range in which the new VMA is to be established. A key insight here is that in all other cases other than mremap(), a new VMA merge either expands an existing VMA, meaning that the target VMA will be that VMA, or would have anon_vma be NULL. Specifically: * __mmap_region() - no anon_vma in place, initial mapping. * do_brk_flags() - expanding an existing VMA. * vma_merge_extend() - expanding an existing VMA. * relocate_vma_down() - no anon_vma in place, initial mapping. In addition, we are in the unique situation of needing to duplicate anon_vma state from a VMA that is neither the previous or next VMA being merged with. dup_anon_vma() deals exclusively with the target=unfaulted, src=faulted case. This leaves four possibilities, in each case where the copied VMA is faulted: 1. Previous VMA unfaulted: copied -----| ---truncated--- | ||||
| CVE-2023-38281 | 1 Ibm | 1 Cloud Pak System | 2026-02-05 | 5.3 Medium |
| IBM Cloud Pak System does not set the secure attribute on authorization tokens or session cookies. Attackers may be able to get the cookie values by sending a http:// link to a user or by planting this link in a site the user goes to. The cookie will be sent to the insecure link and the attacker can then obtain the cookie value by snooping the traffic. | ||||
| CVE-2026-25121 | 1 Chainguard-dev | 1 Apko | 2026-02-05 | 7.5 High |
| apko allows users to build and publish OCI container images built from apk packages. From version 0.14.8 to before 1.1.1, a path traversal vulnerability was discovered in apko's dirFS filesystem abstraction. An attacker who can supply a malicious APK package (e.g., via a compromised or typosquatted repository) could create directories or symlinks outside the intended installation root. The MkdirAll, Mkdir, and Symlink methods in pkg/apk/fs/rwosfs.go use filepath.Join() without validating that the resulting path stays within the base directory. This issue has been patched in version 1.1.1. | ||||
| CVE-2026-25122 | 1 Chainguard-dev | 1 Apko | 2026-02-05 | 5.5 Medium |
| apko allows users to build and publish OCI container images built from apk packages. From version 0.14.8 to before 1.1.0, expandapk.Split drains the first gzip stream of an APK archive via io.Copy(io.Discard, gzi) without explicit bounds. With an attacker-controlled input stream, this can force large gzip inflation work and lead to resource exhaustion (availability impact). The Split function reads the first tar header, then drains the remainder of the gzip stream by reading from the gzip reader directly without any maximum uncompressed byte limit or inflate-ratio cap. A caller that parses attacker-controlled APK streams may be forced to spend excessive CPU time inflating gzip data, leading to timeouts or process slowdown. This issue has been patched in version 1.1.0. | ||||
| CVE-2026-25139 | 1 Riot-os | 1 Riot | 2026-02-05 | N/A |
| RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. In version 2025.10 and prior, multiple out-of-bounds read allow any unauthenticated user, with ability to send or manipulate input packets, to read adjacent memory locations, or crash a vulnerable device running the 6LoWPAN stack. The received packet is cast into a sixlowpan_sfr_rfrag_t struct and dereferenced without validating the packet is large enough to contain the struct object. At time of publication, no known patch exists. | ||||
| CVE-2026-25518 | 1 Cert-manager | 1 Cert-manager | 2026-02-05 | 5.9 Medium |
| cert-manager adds certificates and certificate issuers as resource types in Kubernetes clusters, and simplifies the process of obtaining, renewing and using those certificates. In versions from 1.18.0 to before 1.18.5 and from 1.19.0 to before 1.19.3, the cert-manager-controller performs DNS lookups during ACME DNS-01 processing (for zone discovery and propagation self-checks). By default, these lookups use standard unencrypted DNS. An attacker who can intercept and modify DNS traffic from the cert-manager-controller pod can insert a crafted entry into cert-manager's DNS cache. Accessing this entry will trigger a panic, resulting in denial‑of‑service (DoS) of the cert-manager controller. The issue can also be exploited if the authoritative DNS server for the domain being validated is controlled by a malicious actor. This issue has been patched in versions 1.18.5 and 1.19.3. | ||||
| CVE-2026-25481 | 1 Langroid | 1 Langroid | 2026-02-05 | N/A |
| Langroid is a framework for building large-language-model-powered applications. Prior to version 0.59.32, there is a bypass to the fix for CVE-2025-46724. TableChatAgent can call pandas_eval tool to evaluate the expression. There is a WAF in langroid/utils/pandas_utils.py introduced to block code injection CVE-2025-46724. However it can be bypassed due to _literal_ok() returning False instead of raising UnsafeCommandError on invalid input, combined with unrestricted access to dangerous dunder attributes (__init__, __globals__, __builtins__). This allows chaining whitelisted DataFrame methods to leak the eval builtin and execute arbitrary code. This issue has been patched in version 0.59.32. | ||||
| CVE-2026-25507 | 1 Espressif | 1 Esp-idf | 2026-02-05 | 6.3 Medium |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.2, 5.4.3, 5.3.4, 5.2.6, and 5.1.6, a use-after-free vulnerability was reported in the BLE provisioning transport (protocomm_ble) layer. The issue can be triggered by a remote BLE client while the device is in provisioning mode. The vulnerability occurred when provisioning was stopped with keep_ble_on = true. In this configuration, internal protocomm_ble state and GATT metadata were freed while the BLE stack and GATT services remained active. Subsequent BLE read or write callbacks dereferenced freed memory, allowing a connected or newly connected client to trigger invalid memory acces. This issue has been patched in versions 5.5.3, 5.4.4, 5.3.5, 5.2.7, and 5.1.7. | ||||
| CVE-2026-25508 | 1 Espressif | 1 Esp-idf | 2026-02-05 | 6.3 Medium |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.2, 5.4.3, 5.3.4, 5.2.6, and 5.1.6, an out-of-bounds read vulnerability was reported in the BLE ATT Prepare Write handling of the BLE provisioning transport (protocomm_ble). The issue can be triggered by a remote BLE client while the device is in provisioning mode. The transport accumulated prepared-write fragments in a fixed-size buffer but incorrectly tracked the cumulative length. By sending repeated prepare write requests with overlapping offsets, a remote client could cause the reported length to exceed the allocated buffer size. This inflated length was then passed to provisioning handlers during execute-write processing, resulting in an out-of-bounds read and potential memory corruption. This issue has been patched in versions 5.5.3, 5.4.4, 5.3.5, 5.2.7, and 5.1.7. | ||||
| CVE-2026-25519 | 1 Openslides | 1 Openslides | 2026-02-05 | 8.1 High |
| OpenSlides is a free, web based presentation and assembly system for managing and projecting agenda, motions and elections of an assembly. Prior to version 4.2.29, OpenSlides supports local logins with username and password or an optionally configurable single sign on with SAML via an external IDP. For users synced to OpenSlides via an external IDP, there is an incorrect access control regarding the local login of these users. Users can successfully login using the local login form and the OpenSlides username of a SAML user and a trivial password. This password is valid for all SAML users. This issue has been patched in version 4.2.29. | ||||
| CVE-2026-25523 | 1 Openmage | 1 Magento | 2026-02-05 | 5.3 Medium |
| Magento-lts is a long-term support alternative to Magento Community Edition (CE). Prior to version 20.16.1, the admin url can be discovered without prior knowledge of it's location by exploiting the X-Original-Url header on some configurations. This issue has been patched in version 20.16.1. | ||||
| CVE-2026-25532 | 1 Espressif | 1 Esp-idf | 2026-02-05 | 6.3 Medium |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.2, 5.4.3, 5.3.4, 5.2.6, and 5.1.6, a vulnerability exists in the WPS (Wi-Fi Protected Setup) Enrollee implementation where malformed EAP-WSC packets with truncated payloads can cause integer underflow during fragment length calculation. When processing EAP-Expanded (WSC) messages, the code computes frag_len by subtracting header sizes from the total packet length. If an attacker sends a packet where the EAP Length field covers only the header and flags but omits the expected payload (such as the 2-byte Message Length field when WPS_MSG_FLAG_LEN is set), frag_len becomes negative. This negative value is then implicitly cast to size_t when passed to wpabuf_put_data(), resulting in a very large unsigned value. This issue has been patched in versions 5.5.3, 5.4.4, 5.3.5, 5.2.7, and 5.1.7. | ||||
| CVE-2019-25275 | 1 Filehorse | 1 Bartvpn | 2026-02-05 | 7.8 High |
| BartVPN 1.2.2 contains an unquoted service path vulnerability in the BartVPNService that allows local attackers to potentially execute arbitrary code with elevated system privileges. Attackers can exploit the unquoted binary path by placing malicious executables in specific file system locations to hijack the service's execution context. | ||||
| CVE-2025-1823 | 1 Ibm | 1 Jazz Reporting Service | 2026-02-05 | 3.5 Low |
| IBM Jazz Reporting Service could allow an authenticated user on the host network to cause a denial of service using specially crafted SQL query that consumes excess memory resources. | ||||
| CVE-2026-24843 | 1 Chainguard-dev | 1 Melange | 2026-02-05 | 8.2 High |
| melange allows users to build apk packages using declarative pipelines. In version 0.11.3 to before 0.40.3, an attacker who can influence the tar stream from a QEMU guest VM could write files outside the intended workspace directory on the host. The retrieveWorkspace function extracts tar entries without validating that paths stay within the workspace, allowing path traversal via ../ sequences. This issue has been patched in version 0.40.3. | ||||
| CVE-2026-24844 | 1 Chainguard-dev | 1 Melange | 2026-02-05 | 7.8 High |
| melange allows users to build apk packages using declarative pipelines. From version 0.3.0 to before 0.40.3, an attacker who can provide build input values, but not modify pipeline definitions, could execute arbitrary shell commands if the pipeline uses ${{vars.*}} or ${{inputs.*}} substitutions in working-directory. The field is embedded into shell scripts without proper quote escaping. This issue has been patched in version 0.40.3. | ||||
| CVE-2026-25143 | 1 Chainguard-dev | 1 Melange | 2026-02-05 | 7.8 High |
| melange allows users to build apk packages using declarative pipelines. From version 0.10.0 to before 0.40.3, an attacker who can influence inputs to the patch pipeline could execute arbitrary shell commands on the build host. The patch pipeline in pkg/build/pipelines/patch.yaml embeds input-derived values (series paths, patch filenames, and numeric parameters) into shell scripts without proper quoting or validation, allowing shell metacharacters to break out of their intended context. The vulnerability affects the built-in patch pipeline which can be invoked through melange build and melange license-check operations. An attacker who can control patch-related inputs (e.g., through pull request-driven CI, build-as-a-service, or by influencing melange configurations) can inject shell metacharacters such as backticks, command substitutions $(…), semicolons, pipes, or redirections to execute arbitrary commands with the privileges of the melange build process. This issue has been patched in version 0.40.3. | ||||
| CVE-2026-25145 | 1 Chainguard-dev | 1 Melange | 2026-02-05 | 5.5 Medium |
| melange allows users to build apk packages using declarative pipelines. From version 0.14.0 to before 0.40.3, an attacker who can influence a melange configuration file (e.g., through pull request-driven CI or build-as-a-service scenarios) could read arbitrary files from the host system. The LicensingInfos function in pkg/config/config.go reads license files specified in copyright[].license-path without validating that paths remain within the workspace directory, allowing path traversal via ../ sequences. The contents of the traversed file are embedded into the generated SBOM as license text, enabling exfiltration of sensitive data through build artifacts. This issue has been patched in version 0.40.3. | ||||
| CVE-2026-25157 | 1 Openclaw | 1 Openclaw | 2026-02-05 | 7.8 High |
| OpenClaw is a personal AI assistant. Prior to version 2026.1.29, there is an OS command injection vulnerability via the Project Root Path in sshNodeCommand. The sshNodeCommand function constructed a shell script without properly escaping the user-supplied project path in an error message. When the cd command failed, the unescaped path was interpolated directly into an echo statement, allowing arbitrary command execution on the remote SSH host. The parseSSHTarget function did not validate that SSH target strings could not begin with a dash. An attacker-supplied target like -oProxyCommand=... would be interpreted as an SSH configuration flag rather than a hostname, allowing arbitrary command execution on the local machine. This issue has been patched in version 2026.1.29. | ||||