Filtered by vendor Redhat
Subscriptions
Filtered by product Openshift
Subscriptions
Total
1157 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-27363 | 3 Debian, Freetype, Redhat | 9 Debian Linux, Freetype, Enterprise Linux and 6 more | 2026-02-26 | 8.1 High |
| An out of bounds write exists in FreeType versions 2.13.0 and below (newer versions of FreeType are not vulnerable) when attempting to parse font subglyph structures related to TrueType GX and variable font files. The vulnerable code assigns a signed short value to an unsigned long and then adds a static value causing it to wrap around and allocate too small of a heap buffer. The code then writes up to 6 signed long integers out of bounds relative to this buffer. This may result in arbitrary code execution. This vulnerability may have been exploited in the wild. | ||||
| CVE-2025-24855 | 2 Redhat, Xmlsoft | 8 Enterprise Linux, Openshift, Rhel Aus and 5 more | 2026-02-26 | 7.8 High |
| numbers.c in libxslt before 1.1.43 has a use-after-free because, in nested XPath evaluations, an XPath context node can be modified but never restored. This is related to xsltNumberFormatGetValue, xsltEvalXPathPredicate, xsltEvalXPathStringNs, and xsltComputeSortResultInternal. | ||||
| CVE-2024-12085 | 8 Almalinux, Archlinux, Gentoo and 5 more | 29 Almalinux, Arch Linux, Linux and 26 more | 2026-02-26 | 7.5 High |
| A flaw was found in rsync which could be triggered when rsync compares file checksums. This flaw allows an attacker to manipulate the checksum length (s2length) to cause a comparison between a checksum and uninitialized memory and leak one byte of uninitialized stack data at a time. | ||||
| CVE-2024-12084 | 8 Almalinux, Archlinux, Gentoo and 5 more | 9 Almalinux, Arch Linux, Linux and 6 more | 2026-02-26 | 9.8 Critical |
| A heap-based buffer overflow flaw was found in the rsync daemon. This issue is due to improper handling of attacker-controlled checksum lengths (s2length) in the code. When MAX_DIGEST_LEN exceeds the fixed SUM_LENGTH (16 bytes), an attacker can write out of bounds in the sum2 buffer. | ||||
| CVE-2025-24928 | 3 Netapp, Redhat, Xmlsoft | 28 Active Iq Unified Manager, H300s, H300s Firmware and 25 more | 2026-02-26 | 7.8 High |
| libxml2 before 2.12.10 and 2.13.x before 2.13.6 has a stack-based buffer overflow in xmlSnprintfElements in valid.c. To exploit this, DTD validation must occur for an untrusted document or untrusted DTD. NOTE: this is similar to CVE-2017-9047. | ||||
| CVE-2025-0624 | 1 Redhat | 7 Enterprise Linux, Openshift, Rhel Aus and 4 more | 2026-02-26 | 7.6 High |
| A flaw was found in grub2. During the network boot process, when trying to search for the configuration file, grub copies data from a user controlled environment variable into an internal buffer using the grub_strcpy() function. During this step, it fails to consider the environment variable length when allocating the internal buffer, resulting in an out-of-bounds write. If correctly exploited, this issue may result in remote code execution through the same network segment grub is searching for the boot information, which can be used to by-pass secure boot protections. | ||||
| CVE-2025-4802 | 2 Gnu, Redhat | 7 Glibc, Discovery, Enterprise Linux and 4 more | 2026-02-26 | 7.8 High |
| Untrusted LD_LIBRARY_PATH environment variable vulnerability in the GNU C Library version 2.27 to 2.38 allows attacker controlled loading of dynamically shared library in statically compiled setuid binaries that call dlopen (including internal dlopen calls after setlocale or calls to NSS functions such as getaddrinfo). | ||||
| CVE-2025-7519 | 1 Redhat | 3 Enterprise Linux, Openshift, Openshift Container Platform | 2026-02-26 | 6.7 Medium |
| A flaw was found in polkit. When processing an XML policy with 32 or more nested elements in depth, an out-of-bounds write can be triggered. This issue can lead to a crash or other unexpected behavior, and arbitrary code execution is not discarded. To exploit this flaw, a high-privilege account is needed as it's required to place the malicious policy file properly. | ||||
| CVE-2025-10230 | 1 Redhat | 2 Enterprise Linux, Openshift | 2026-02-26 | 10 Critical |
| A flaw was found in Samba, in the front-end WINS hook handling: NetBIOS names from registration packets are passed to a shell without proper validation or escaping. Unsanitized NetBIOS name data from WINS registration packets are inserted into a shell command and executed by the Samba Active Directory Domain Controller’s wins hook, allowing an unauthenticated network attacker to achieve remote command execution as the Samba process. | ||||
| CVE-2025-1272 | 1 Redhat | 2 Enterprise Linux, Openshift | 2026-02-26 | 7.7 High |
| The Linux Kernel lockdown mode for kernel versions starting on 6.12 and above for Fedora Linux has the lockdown mode disabled without any warning. This may allow an attacker to gain access to sensitive information such kernel memory mappings, I/O ports, BPF and kprobes. Additionally unsigned modules can be loaded, leading to execution of untrusted code breaking breaking any Secure Boot protection. This vulnerability affects only Fedora Linux. | ||||
| CVE-2024-5154 | 2 Kubernetes, Redhat | 4 Cri-o, Enterprise Linux, Openshift and 1 more | 2026-02-25 | 8.1 High |
| A flaw was found in cri-o. A malicious container can create a symbolic link to arbitrary files on the host via directory traversal (“../“). This flaw allows the container to read and write to arbitrary files on the host system. | ||||
| CVE-2025-8556 | 1 Redhat | 23 Acm, Advanced Cluster Security, Ceph Storage and 20 more | 2026-02-25 | 3.7 Low |
| A flaw was found in CIRCL's implementation of the FourQ elliptic curve. This vulnerability allows an attacker to compromise session security via low-order point injection and incorrect point validation during Diffie-Hellman key exchange. | ||||
| CVE-2025-0690 | 1 Redhat | 2 Enterprise Linux, Openshift | 2026-02-25 | 6.1 Medium |
| The read command is used to read the keyboard input from the user, while reads it keeps the input length in a 32-bit integer value which is further used to reallocate the line buffer to accept the next character. During this process, with a line big enough it's possible to make this variable to overflow leading to a out-of-bounds write in the heap based buffer. This flaw may be leveraged to corrupt grub's internal critical data and secure boot bypass is not discarded as consequence. | ||||
| CVE-2024-8676 | 1 Redhat | 2 Enterprise Linux, Openshift | 2026-02-25 | 7.4 High |
| A vulnerability was found in CRI-O, where it can be requested to take a checkpoint archive of a container and later be asked to restore it. When it does that restoration, it attempts to restore the mounts from the restore archive instead of the pod request. As a result, the validations run on the pod spec, verifying that the pod has access to the mounts it specifies are not applicable to a restored container. This flaw allows a malicious user to trick CRI-O into restoring a pod that doesn't have access to host mounts. The user needs access to the kubelet or cri-o socket to call the restore endpoint and trigger the restore. | ||||
| CVE-2024-6508 | 1 Redhat | 1 Openshift | 2026-02-25 | 8 High |
| An insufficient entropy vulnerability was found in the Openshift Console. In the authorization code type and implicit grant type, the OAuth2 protocol is vulnerable to a Cross-Site Request Forgery (CSRF) attack if the state parameter is used inefficiently. This flaw allows logging into the victim’s current application account using a third-party account without any restrictions. | ||||
| CVE-2025-4877 | 1 Redhat | 2 Enterprise Linux, Openshift | 2026-02-25 | 4.5 Medium |
| There's a vulnerability in the libssh package where when a libssh consumer passes in an unexpectedly large input buffer to ssh_get_fingerprint_hash() function. In such cases the bin_to_base64() function can experience an integer overflow leading to a memory under allocation, when that happens it's possible that the program perform out of bounds write leading to a heap corruption. This issue affects only 32-bits builds of libssh. | ||||
| CVE-2025-5917 | 2 Libarchive, Redhat | 4 Libarchive, Enterprise Linux, Openshift and 1 more | 2026-02-25 | 2.8 Low |
| A vulnerability has been identified in the libarchive library. This flaw involves an 'off-by-one' miscalculation when handling prefixes and suffixes for file names. This can lead to a 1-byte write overflow. While seemingly small, such an overflow can corrupt adjacent memory, leading to unpredictable program behavior, crashes, or in specific circumstances, could be leveraged as a building block for more sophisticated exploitation. This bug affects libarchive versions prior to 3.8.0. | ||||
| CVE-2024-4369 | 1 Redhat | 1 Openshift | 2026-02-25 | 6.8 Medium |
| An information disclosure flaw was found in OpenShift's internal image registry operator. The AZURE_CLIENT_SECRET can be exposed through an environment variable defined in the pod definition, but is limited to Azure environments. An attacker controlling an account that has high enough permissions to obtain pod information from the openshift-image-registry namespace could use this obtained client secret to perform actions as the registry operator's Azure service account. | ||||
| CVE-2024-45780 | 1 Redhat | 2 Enterprise Linux, Openshift | 2026-02-25 | 6.7 Medium |
| A flaw was found in grub2. When reading tar files, grub2 allocates an internal buffer for the file name. However, it fails to properly verify the allocation against possible integer overflows. It's possible to cause the allocation length to overflow with a crafted tar file, leading to a heap out-of-bounds write. This flaw eventually allows an attacker to circumvent secure boot protections. | ||||
| CVE-2024-45496 | 1 Redhat | 1 Openshift | 2026-02-25 | 9.9 Critical |
| A flaw was found in OpenShift. This issue occurs due to the misuse of elevated privileges in the OpenShift Container Platform's build process. During the build initialization step, the git-clone container is run with a privileged security context, allowing unrestricted access to the node. An attacker with developer-level access can provide a crafted .gitconfig file containing commands executed during the cloning process, leading to arbitrary command execution on the worker node. An attacker running code in a privileged container could escalate their permissions on the node running the container. | ||||