Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
12784 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38301 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmem: zynqmp_nvmem: unbreak driver after cleanup Commit 29be47fcd6a0 ("nvmem: zynqmp_nvmem: zynqmp_nvmem_probe cleanup") changed the driver to expect the device pointer to be passed as the "context", but in nvmem the context parameter comes from nvmem_config.priv which is never set - Leading to null pointer exceptions when the device is accessed. | ||||
| CVE-2025-38300 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ce-cipher - fix error handling in sun8i_ce_cipher_prepare() Fix two DMA cleanup issues on the error path in sun8i_ce_cipher_prepare(): 1] If dma_map_sg() fails for areq->dst, the device driver would try to free DMA memory it has not allocated in the first place. To fix this, on the "theend_sgs" error path, call dma unmap only if the corresponding dma map was successful. 2] If the dma_map_single() call for the IV fails, the device driver would try to free an invalid DMA memory address on the "theend_iv" path: ------------[ cut here ]------------ DMA-API: sun8i-ce 1904000.crypto: device driver tries to free an invalid DMA memory address WARNING: CPU: 2 PID: 69 at kernel/dma/debug.c:968 check_unmap+0x123c/0x1b90 Modules linked in: skcipher_example(O+) CPU: 2 UID: 0 PID: 69 Comm: 1904000.crypto- Tainted: G O 6.15.0-rc3+ #24 PREEMPT Tainted: [O]=OOT_MODULE Hardware name: OrangePi Zero2 (DT) pc : check_unmap+0x123c/0x1b90 lr : check_unmap+0x123c/0x1b90 ... Call trace: check_unmap+0x123c/0x1b90 (P) debug_dma_unmap_page+0xac/0xc0 dma_unmap_page_attrs+0x1f4/0x5fc sun8i_ce_cipher_do_one+0x1bd4/0x1f40 crypto_pump_work+0x334/0x6e0 kthread_worker_fn+0x21c/0x438 kthread+0x374/0x664 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- To fix this, check for !dma_mapping_error() before calling dma_unmap_single() on the "theend_iv" path. | ||||
| CVE-2025-38299 | 2 Linux, Mediatek | 2 Linux Kernel, Mt8195 | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8195: Set ETDM1/2 IN/OUT to COMP_DUMMY() ETDM2_IN_BE and ETDM1_OUT_BE are defined as COMP_EMPTY(), in the case the codec dai_name will be null. Avoid a crash if the device tree is not assigning a codec to these links. [ 1.179936] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 1.181065] Mem abort info: [ 1.181420] ESR = 0x0000000096000004 [ 1.181892] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.182576] SET = 0, FnV = 0 [ 1.182964] EA = 0, S1PTW = 0 [ 1.183367] FSC = 0x04: level 0 translation fault [ 1.183983] Data abort info: [ 1.184406] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 1.185097] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1.185766] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1.186439] [0000000000000000] user address but active_mm is swapper [ 1.187239] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 1.188029] Modules linked in: [ 1.188420] CPU: 7 UID: 0 PID: 70 Comm: kworker/u32:1 Not tainted 6.14.0-rc4-next-20250226+ #85 [ 1.189515] Hardware name: Radxa NIO 12L (DT) [ 1.190065] Workqueue: events_unbound deferred_probe_work_func [ 1.190808] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.191683] pc : __pi_strcmp+0x24/0x140 [ 1.192170] lr : mt8195_mt6359_soc_card_probe+0x224/0x7b0 [ 1.192854] sp : ffff800083473970 [ 1.193271] x29: ffff800083473a10 x28: 0000000000001008 x27: 0000000000000002 [ 1.194168] x26: ffff800082408960 x25: ffff800082417db0 x24: ffff800082417d88 [ 1.195065] x23: 000000000000001e x22: ffff800082dbf480 x21: ffff800082dc07b8 [ 1.195961] x20: 0000000000000000 x19: 0000000000000013 x18: 00000000ffffffff [ 1.196858] x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000006 [ 1.197755] x14: ffff800082407af0 x13: 6e6f69737265766e x12: 692d6b636f6c6374 [ 1.198651] x11: 0000000000000002 x10: ffff80008240b920 x9 : 0000000000000018 [ 1.199547] x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000 [ 1.200443] x5 : 0000000000000000 x4 : 8080808080000000 x3 : 303933383978616d [ 1.201339] x2 : 0000000000000000 x1 : ffff80008240b920 x0 : 0000000000000000 [ 1.202236] Call trace: [ 1.202545] __pi_strcmp+0x24/0x140 (P) [ 1.203029] mtk_soundcard_common_probe+0x3bc/0x5b8 [ 1.203644] platform_probe+0x70/0xe8 [ 1.204106] really_probe+0xc8/0x3a0 [ 1.204556] __driver_probe_device+0x84/0x160 [ 1.205104] driver_probe_device+0x44/0x130 [ 1.205630] __device_attach_driver+0xc4/0x170 [ 1.206189] bus_for_each_drv+0x8c/0xf8 [ 1.206672] __device_attach+0xa8/0x1c8 [ 1.207155] device_initial_probe+0x1c/0x30 [ 1.207681] bus_probe_device+0xb0/0xc0 [ 1.208165] deferred_probe_work_func+0xa4/0x100 [ 1.208747] process_one_work+0x158/0x3e0 [ 1.209254] worker_thread+0x2c4/0x3e8 [ 1.209727] kthread+0x134/0x1f0 [ 1.210136] ret_from_fork+0x10/0x20 [ 1.210589] Code: 54000401 b50002c6 d503201f f86a6803 (f8408402) [ 1.211355] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2025-38298 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/skx_common: Fix general protection fault After loading i10nm_edac (which automatically loads skx_edac_common), if unload only i10nm_edac, then reload it and perform error injection testing, a general protection fault may occur: mce: [Hardware Error]: Machine check events logged Oops: general protection fault ... ... Workqueue: events mce_gen_pool_process RIP: 0010:string+0x53/0xe0 ... Call Trace: <TASK> ? die_addr+0x37/0x90 ? exc_general_protection+0x1e7/0x3f0 ? asm_exc_general_protection+0x26/0x30 ? string+0x53/0xe0 vsnprintf+0x23e/0x4c0 snprintf+0x4d/0x70 skx_adxl_decode+0x16a/0x330 [skx_edac_common] skx_mce_check_error.part.0+0xf8/0x220 [skx_edac_common] skx_mce_check_error+0x17/0x20 [skx_edac_common] ... The issue arose was because the variable 'adxl_component_count' (inside skx_edac_common), which counts the ADXL components, was not reset. During the reloading of i10nm_edac, the count was incremented by the actual number of ADXL components again, resulting in a count that was double the real number of ADXL components. This led to an out-of-bounds reference to the ADXL component array, causing the general protection fault above. Fix this issue by resetting the 'adxl_component_count' in adxl_put(), which is called during the unloading of {skx,i10nm}_edac. | ||||
| CVE-2025-38297 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: PM: EM: Fix potential division-by-zero error in em_compute_costs() When the device is of a non-CPU type, table[i].performance won't be initialized in the previous em_init_performance(), resulting in division by zero when calculating costs in em_compute_costs(). Since the 'cost' algorithm is only used for EAS energy efficiency calculations and is currently not utilized by other device drivers, we should add the _is_cpu_device(dev) check to prevent this division-by-zero issue. | ||||
| CVE-2025-38296 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: platform_profile: Avoid initializing on non-ACPI platforms The platform profile driver is loaded even on platforms that do not have ACPI enabled. The initialization of the sysfs entries was recently moved from platform_profile_register() to the module init call, and those entries need acpi_kobj to be initialized which is not the case when ACPI is disabled. This results in the following warning: WARNING: CPU: 5 PID: 1 at fs/sysfs/group.c:131 internal_create_group+0xa22/0xdd8 Modules linked in: CPU: 5 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.15.0-rc7-dirty #6 PREEMPT Tainted: [W]=WARN Hardware name: riscv-virtio,qemu (DT) epc : internal_create_group+0xa22/0xdd8 ra : internal_create_group+0xa22/0xdd8 Call Trace: internal_create_group+0xa22/0xdd8 sysfs_create_group+0x22/0x2e platform_profile_init+0x74/0xb2 do_one_initcall+0x198/0xa9e kernel_init_freeable+0x6d8/0x780 kernel_init+0x28/0x24c ret_from_fork+0xe/0x18 Fix this by checking if ACPI is enabled before trying to create sysfs entries. [ rjw: Subject and changelog edits ] | ||||
| CVE-2025-38295 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/amlogic: Replace smp_processor_id() with raw_smp_processor_id() in meson_ddr_pmu_create() The Amlogic DDR PMU driver meson_ddr_pmu_create() function incorrectly uses smp_processor_id(), which assumes disabled preemption. This leads to kernel warnings during module loading because meson_ddr_pmu_create() can be called in a preemptible context. Following kernel warning and stack trace: [ 31.745138] [ T2289] BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/2289 [ 31.745154] [ T2289] caller is debug_smp_processor_id+0x28/0x38 [ 31.745172] [ T2289] CPU: 4 UID: 0 PID: 2289 Comm: (udev-worker) Tainted: GW 6.14.0-0-MANJARO-ARM #1 59519addcbca6ba8de735e151fd7b9e97aac7ff0 [ 31.745181] [ T2289] Tainted: [W]=WARN [ 31.745183] [ T2289] Hardware name: Hardkernel ODROID-N2Plus (DT) [ 31.745188] [ T2289] Call trace: [ 31.745191] [ T2289] show_stack+0x28/0x40 (C) [ 31.745199] [ T2289] dump_stack_lvl+0x4c/0x198 [ 31.745205] [ T2289] dump_stack+0x20/0x50 [ 31.745209] [ T2289] check_preemption_disabled+0xec/0xf0 [ 31.745213] [ T2289] debug_smp_processor_id+0x28/0x38 [ 31.745216] [ T2289] meson_ddr_pmu_create+0x200/0x560 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd] [ 31.745237] [ T2289] g12_ddr_pmu_probe+0x20/0x38 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd] [ 31.745246] [ T2289] platform_probe+0x98/0xe0 [ 31.745254] [ T2289] really_probe+0x144/0x3f8 [ 31.745258] [ T2289] __driver_probe_device+0xb8/0x180 [ 31.745261] [ T2289] driver_probe_device+0x54/0x268 [ 31.745264] [ T2289] __driver_attach+0x11c/0x288 [ 31.745267] [ T2289] bus_for_each_dev+0xfc/0x160 [ 31.745274] [ T2289] driver_attach+0x34/0x50 [ 31.745277] [ T2289] bus_add_driver+0x160/0x2b0 [ 31.745281] [ T2289] driver_register+0x78/0x120 [ 31.745285] [ T2289] __platform_driver_register+0x30/0x48 [ 31.745288] [ T2289] init_module+0x30/0xfe0 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd] [ 31.745298] [ T2289] do_one_initcall+0x11c/0x438 [ 31.745303] [ T2289] do_init_module+0x68/0x228 [ 31.745311] [ T2289] load_module+0x118c/0x13a8 [ 31.745315] [ T2289] __arm64_sys_finit_module+0x274/0x390 [ 31.745320] [ T2289] invoke_syscall+0x74/0x108 [ 31.745326] [ T2289] el0_svc_common+0x90/0xf8 [ 31.745330] [ T2289] do_el0_svc+0x2c/0x48 [ 31.745333] [ T2289] el0_svc+0x60/0x150 [ 31.745337] [ T2289] el0t_64_sync_handler+0x80/0x118 [ 31.745341] [ T2289] el0t_64_sync+0x1b8/0x1c0 Changes replaces smp_processor_id() with raw_smp_processor_id() to ensure safe CPU ID retrieval in preemptible contexts. | ||||
| CVE-2025-38294 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL access in assign channel context handler Currently, when ath12k_mac_assign_vif_to_vdev() fails, the radio handle (ar) gets accessed from the link VIF handle (arvif) for debug logging, This is incorrect. In the fail scenario, radio handle is NULL. Fix the NULL access, avoid radio handle access by moving to the hardware debug logging helper function (ath12k_hw_warn). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 | ||||
| CVE-2025-38293 | 2 Linux, Qualcomm | 2 Linux Kernel, Qca6698aq | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix node corruption in ar->arvifs list In current WLAN recovery code flow, ath11k_core_halt() only reinitializes the "arvifs" list head. This will cause the list node immediately following the list head to become an invalid list node. Because the prev of that node still points to the list head "arvifs", but the next of the list head "arvifs" no longer points to that list node. When a WLAN recovery occurs during the execution of a vif removal, and it happens before the spin_lock_bh(&ar->data_lock) in ath11k_mac_op_remove_interface(), list_del() will detect the previously mentioned situation, thereby triggering a kernel panic. The fix is to remove and reinitialize all vif list nodes from the list head "arvifs" during WLAN halt. The reinitialization is to make the list nodes valid, ensuring that the list_del() in ath11k_mac_op_remove_interface() can execute normally. Call trace: __list_del_entry_valid_or_report+0xb8/0xd0 ath11k_mac_op_remove_interface+0xb0/0x27c [ath11k] drv_remove_interface+0x48/0x194 [mac80211] ieee80211_do_stop+0x6e0/0x844 [mac80211] ieee80211_stop+0x44/0x17c [mac80211] __dev_close_many+0xac/0x150 __dev_change_flags+0x194/0x234 dev_change_flags+0x24/0x6c devinet_ioctl+0x3a0/0x670 inet_ioctl+0x200/0x248 sock_do_ioctl+0x60/0x118 sock_ioctl+0x274/0x35c __arm64_sys_ioctl+0xac/0xf0 invoke_syscall+0x48/0x114 ... Tested-on: QCA6698AQ hw2.1 PCI WLAN.HSP.1.1-04591-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 | ||||
| CVE-2025-38292 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix invalid access to memory In ath12k_dp_rx_msdu_coalesce(), rxcb is fetched from skb and boolean is_continuation is part of rxcb. Currently, after freeing the skb, the rxcb->is_continuation accessed again which is wrong since the memory is already freed. This might lead use-after-free error. Hence, fix by locally defining bool is_continuation from rxcb, so that after freeing skb, is_continuation can be used. Compile tested only. | ||||
| CVE-2025-38291 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Prevent sending WMI commands to firmware during firmware crash Currently, we encounter the following kernel call trace when a firmware crash occurs. This happens because the host sends WMI commands to the firmware while it is in recovery, causing the commands to fail and resulting in the kernel call trace. Set the ATH12K_FLAG_CRASH_FLUSH and ATH12K_FLAG_RECOVERY flags when the host driver receives the firmware crash notification from MHI. This prevents sending WMI commands to the firmware during recovery. Call Trace: <TASK> dump_stack_lvl+0x75/0xc0 register_lock_class+0x6be/0x7a0 ? __lock_acquire+0x644/0x19a0 __lock_acquire+0x95/0x19a0 lock_acquire+0x265/0x310 ? ath12k_ce_send+0xa2/0x210 [ath12k] ? find_held_lock+0x34/0xa0 ? ath12k_ce_send+0x56/0x210 [ath12k] _raw_spin_lock_bh+0x33/0x70 ? ath12k_ce_send+0xa2/0x210 [ath12k] ath12k_ce_send+0xa2/0x210 [ath12k] ath12k_htc_send+0x178/0x390 [ath12k] ath12k_wmi_cmd_send_nowait+0x76/0xa0 [ath12k] ath12k_wmi_cmd_send+0x62/0x190 [ath12k] ath12k_wmi_pdev_bss_chan_info_request+0x62/0xc0 [ath1 ath12k_mac_op_get_survey+0x2be/0x310 [ath12k] ieee80211_dump_survey+0x99/0x240 [mac80211] nl80211_dump_survey+0xe7/0x470 [cfg80211] ? kmalloc_reserve+0x59/0xf0 genl_dumpit+0x24/0x70 netlink_dump+0x177/0x360 __netlink_dump_start+0x206/0x280 genl_family_rcv_msg_dumpit.isra.22+0x8a/0xe0 ? genl_family_rcv_msg_attrs_parse.isra.23+0xe0/0xe0 ? genl_op_lock.part.12+0x10/0x10 ? genl_dumpit+0x70/0x70 genl_rcv_msg+0x1d0/0x290 ? nl80211_del_station+0x330/0x330 [cfg80211] ? genl_get_cmd_both+0x50/0x50 netlink_rcv_skb+0x4f/0x100 genl_rcv+0x1f/0x30 netlink_unicast+0x1b6/0x260 netlink_sendmsg+0x31a/0x450 __sock_sendmsg+0xa8/0xb0 ____sys_sendmsg+0x1e4/0x260 ___sys_sendmsg+0x89/0xe0 ? local_clock_noinstr+0xb/0xc0 ? rcu_is_watching+0xd/0x40 ? kfree+0x1de/0x370 ? __sys_sendmsg+0x7a/0xc0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2025-38290 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix node corruption in ar->arvifs list In current WLAN recovery code flow, ath12k_core_halt() only reinitializes the "arvifs" list head. This will cause the list node immediately following the list head to become an invalid list node. Because the prev of that node still points to the list head "arvifs", but the next of the list head "arvifs" no longer points to that list node. When a WLAN recovery occurs during the execution of a vif removal, and it happens before the spin_lock_bh(&ar->data_lock) in ath12k_mac_vdev_delete(), list_del() will detect the previously mentioned situation, thereby triggering a kernel panic. The fix is to remove and reinitialize all vif list nodes from the list head "arvifs" during WLAN halt. The reinitialization is to make the list nodes valid, ensuring that the list_del() in ath12k_mac_vdev_delete() can execute normally. Call trace: __list_del_entry_valid_or_report+0xd4/0x100 (P) ath12k_mac_remove_link_interface.isra.0+0xf8/0x2e4 [ath12k] ath12k_scan_vdev_clean_work+0x40/0x164 [ath12k] cfg80211_wiphy_work+0xfc/0x100 process_one_work+0x164/0x2d0 worker_thread+0x254/0x380 kthread+0xfc/0x100 ret_from_fork+0x10/0x20 The change is mostly copied from the ath11k patch: https://lore.kernel.org/all/20250320053145.3445187-1-quic_stonez@quicinc.com/ Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2025-38289 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Avoid potential ndlp use-after-free in dev_loss_tmo_callbk Smatch detected a potential use-after-free of an ndlp oject in dev_loss_tmo_callbk during driver unload or fatal error handling. Fix by reordering code to avoid potential use-after-free if initial nodelist reference has been previously removed. | ||||
| CVE-2025-38288 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: smartpqi: Fix smp_processor_id() call trace for preemptible kernels Correct kernel call trace when calling smp_processor_id() when called in preemptible kernels by using raw_smp_processor_id(). smp_processor_id() checks to see if preemption is disabled and if not, issue an error message followed by a call to dump_stack(). Brief example of call trace: kernel: check_preemption_disabled: 436 callbacks suppressed kernel: BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u1025:0/2354 kernel: caller is pqi_scsi_queue_command+0x183/0x310 [smartpqi] kernel: CPU: 129 PID: 2354 Comm: kworker/u1025:0 kernel: ... kernel: Workqueue: writeback wb_workfn (flush-253:0) kernel: Call Trace: kernel: <TASK> kernel: dump_stack_lvl+0x34/0x48 kernel: check_preemption_disabled+0xdd/0xe0 kernel: pqi_scsi_queue_command+0x183/0x310 [smartpqi] kernel: ... | ||||
| CVE-2025-38287 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/cm: Drop lockdep assert and WARN when freeing old msg The send completion handler can run after cm_id has advanced to another message. The cm_id lock is not needed in this case, but a recent change re-used cm_free_priv_msg(), which asserts that the lock is held and WARNs if the cm_id's currently outstanding msg is different than the one being freed. | ||||
| CVE-2025-38286 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: at91: Fix possible out-of-boundary access at91_gpio_probe() doesn't check that given OF alias is not available or something went wrong when trying to get it. This might have consequences when accessing gpio_chips array with that value as an index. Note, that BUG() can be compiled out and hence won't actually perform the required checks. | ||||
| CVE-2025-38285 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix WARN() in get_bpf_raw_tp_regs syzkaller reported an issue: WARNING: CPU: 3 PID: 5971 at kernel/trace/bpf_trace.c:1861 get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861 Modules linked in: CPU: 3 UID: 0 PID: 5971 Comm: syz-executor205 Not tainted 6.15.0-rc5-syzkaller-00038-g707df3375124 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861 RSP: 0018:ffffc90003636fa8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffff81c6bc4c RDX: ffff888032efc880 RSI: ffffffff81c6bc83 RDI: 0000000000000005 RBP: ffff88806a730860 R08: 0000000000000005 R09: 0000000000000003 R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000004 R13: 0000000000000001 R14: ffffc90003637008 R15: 0000000000000900 FS: 0000000000000000(0000) GS:ffff8880d6cdf000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7baee09130 CR3: 0000000029f5a000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1934 [inline] bpf_get_stack_raw_tp+0x24/0x160 kernel/trace/bpf_trace.c:1931 bpf_prog_ec3b2eefa702d8d3+0x43/0x47 bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline] __bpf_prog_run include/linux/filter.h:718 [inline] bpf_prog_run include/linux/filter.h:725 [inline] __bpf_trace_run kernel/trace/bpf_trace.c:2363 [inline] bpf_trace_run3+0x23f/0x5a0 kernel/trace/bpf_trace.c:2405 __bpf_trace_mmap_lock_acquire_returned+0xfc/0x140 include/trace/events/mmap_lock.h:47 __traceiter_mmap_lock_acquire_returned+0x79/0xc0 include/trace/events/mmap_lock.h:47 __do_trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline] trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline] __mmap_lock_do_trace_acquire_returned+0x138/0x1f0 mm/mmap_lock.c:35 __mmap_lock_trace_acquire_returned include/linux/mmap_lock.h:36 [inline] mmap_read_trylock include/linux/mmap_lock.h:204 [inline] stack_map_get_build_id_offset+0x535/0x6f0 kernel/bpf/stackmap.c:157 __bpf_get_stack+0x307/0xa10 kernel/bpf/stackmap.c:483 ____bpf_get_stack kernel/bpf/stackmap.c:499 [inline] bpf_get_stack+0x32/0x40 kernel/bpf/stackmap.c:496 ____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1941 [inline] bpf_get_stack_raw_tp+0x124/0x160 kernel/trace/bpf_trace.c:1931 bpf_prog_ec3b2eefa702d8d3+0x43/0x47 Tracepoint like trace_mmap_lock_acquire_returned may cause nested call as the corner case show above, which will be resolved with more general method in the future. As a result, WARN_ON_ONCE will be triggered. As Alexei suggested, remove the WARN_ON_ONCE first. | ||||
| CVE-2025-38284 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: pci: configure manual DAC mode via PCI config API only To support 36-bit DMA, configure chip proprietary bit via PCI config API or chip DBI interface. However, the PCI device mmap isn't set yet and the DBI is also inaccessible via mmap, so only if the bit can be accessible via PCI config API, chip can support 36-bit DMA. Otherwise, fallback to 32-bit DMA. With NULL mmap address, kernel throws trace: BUG: unable to handle page fault for address: 0000000000001090 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 1 UID: 0 PID: 71 Comm: irq/26-pciehp Tainted: G OE 6.14.2-061402-generic #202504101348 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE RIP: 0010:rtw89_pci_ops_write16+0x12/0x30 [rtw89_pci] RSP: 0018:ffffb0ffc0acf9d8 EFLAGS: 00010206 RAX: ffffffffc158f9c0 RBX: ffff94865e702020 RCX: 0000000000000000 RDX: 0000000000000718 RSI: 0000000000001090 RDI: ffff94865e702020 RBP: ffffb0ffc0acf9d8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000015 R13: 0000000000000719 R14: ffffb0ffc0acfa1f R15: ffffffffc1813060 FS: 0000000000000000(0000) GS:ffff9486f3480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001090 CR3: 0000000090440001 CR4: 00000000000626f0 Call Trace: <TASK> rtw89_pci_read_config_byte+0x6d/0x120 [rtw89_pci] rtw89_pci_cfg_dac+0x5b/0xb0 [rtw89_pci] rtw89_pci_probe+0xa96/0xbd0 [rtw89_pci] ? __pfx___device_attach_driver+0x10/0x10 ? __pfx___device_attach_driver+0x10/0x10 local_pci_probe+0x47/0xa0 pci_call_probe+0x5d/0x190 pci_device_probe+0xa7/0x160 really_probe+0xf9/0x370 ? pm_runtime_barrier+0x55/0xa0 __driver_probe_device+0x8c/0x140 driver_probe_device+0x24/0xd0 __device_attach_driver+0xcd/0x170 bus_for_each_drv+0x99/0x100 __device_attach+0xb4/0x1d0 device_attach+0x10/0x20 pci_bus_add_device+0x59/0x90 pci_bus_add_devices+0x31/0x80 pciehp_configure_device+0xaa/0x170 pciehp_enable_slot+0xd6/0x240 pciehp_handle_presence_or_link_change+0xf1/0x180 pciehp_ist+0x162/0x1c0 irq_thread_fn+0x24/0x70 irq_thread+0xef/0x1c0 ? __pfx_irq_thread_fn+0x10/0x10 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xfc/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x47/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> | ||||
| CVE-2025-38283 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hisi_acc_vfio_pci: bugfix live migration function without VF device driver If the VF device driver is not loaded in the Guest OS and we attempt to perform device data migration, the address of the migrated data will be NULL. The live migration recovery operation on the destination side will access a null address value, which will cause access errors. Therefore, live migration of VMs without added VF device drivers does not require device data migration. In addition, when the queue address data obtained by the destination is empty, device queue recovery processing will not be performed. | ||||
| CVE-2025-38282 | 1 Linux | 1 Linux Kernel | 2025-07-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kernfs: Relax constraint in draining guard The active reference lifecycle provides the break/unbreak mechanism but the active reference is not truly active after unbreak -- callers don't use it afterwards but it's important for proper pairing of kn->active counting. Assuming this mechanism is in place, the WARN check in kernfs_should_drain_open_files() is too sensitive -- it may transiently catch those (rightful) callers between kernfs_unbreak_active_protection() and kernfs_put_active() as found out by Chen Ridong: kernfs_remove_by_name_ns kernfs_get_active // active=1 __kernfs_remove // active=0x80000002 kernfs_drain ... wait_event //waiting (active == 0x80000001) kernfs_break_active_protection // active = 0x80000001 // continue kernfs_unbreak_active_protection // active = 0x80000002 ... kernfs_should_drain_open_files // warning occurs kernfs_put_active To avoid the false positives (mind panic_on_warn) remove the check altogether. (This is meant as quick fix, I think active reference break/unbreak may be simplified with larger rework.) | ||||