Filtered by vendor Redhat
Subscriptions
Filtered by product Openshift
Subscriptions
Total
1157 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-52615 | 1 Redhat | 2 Enterprise Linux, Openshift | 2026-03-19 | 5.3 Medium |
| A flaw was found in Avahi-daemon, which relies on fixed source ports for wide-area DNS queries. This issue simplifies attacks where malicious DNS responses are injected. | ||||
| CVE-2024-9341 | 2 Containers, Redhat | 5 Common, Enterprise Linux, Openshift and 2 more | 2026-03-19 | 5.4 Medium |
| A flaw was found in Go. When FIPS mode is enabled on a system, container runtimes may incorrectly handle certain file paths due to improper validation in the containers/common Go library. This flaw allows an attacker to exploit symbolic links and trick the system into mounting sensitive host directories inside a container. This issue also allows attackers to access critical host files, bypassing the intended isolation between containers and the host system. | ||||
| CVE-2025-14512 | 2 Gnome, Redhat | 3 Glib, Enterprise Linux, Openshift | 2026-03-19 | 6.5 Medium |
| A flaw was found in glib. This vulnerability allows a heap buffer overflow and denial-of-service (DoS) via an integer overflow in GLib's GIO (GLib Input/Output) escape_byte_string() function when processing malicious file or remote filesystem attribute values. | ||||
| CVE-2025-13601 | 2 Gnome, Redhat | 40 Glib, Ceph Storage, Codeready Linux Builder and 37 more | 2026-03-19 | 7.7 High |
| A heap-based buffer overflow problem was found in glib through an incorrect calculation of buffer size in the g_escape_uri_string() function. If the string to escape contains a very large number of unacceptable characters (which would need escaping), the calculation of the length of the escaped string could overflow, leading to a potential write off the end of the newly allocated string. | ||||
| CVE-2025-0620 | 2 Redhat, Samba | 3 Enterprise Linux, Openshift, Samba | 2026-03-18 | 4.9 Medium |
| A flaw was found in Samba. The smbd service daemon does not pick up group membership changes when re-authenticating an expired SMB session. This issue can expose file shares until clients disconnect and then connect again. | ||||
| CVE-2025-5318 | 2 Libssh, Redhat | 11 Libssh, Ai Inference Server, Enterprise Linux and 8 more | 2026-03-18 | 8.1 High |
| A flaw was found in the libssh library in versions less than 0.11.2. An out-of-bounds read can be triggered in the sftp_handle function due to an incorrect comparison check that permits the function to access memory beyond the valid handle list and to return an invalid pointer, which is used in further processing. This vulnerability allows an authenticated remote attacker to potentially read unintended memory regions, exposing sensitive information or affect service behavior. | ||||
| CVE-2025-14104 | 1 Redhat | 5 Ceph Storage, Enterprise Linux, Insights Proxy and 2 more | 2026-03-18 | 6.1 Medium |
| A flaw was found in util-linux. This vulnerability allows a heap buffer overread when processing 256-byte usernames, specifically within the `setpwnam()` function, affecting SUID (Set User ID) login-utils utilities writing to the password database. | ||||
| CVE-2024-9675 | 2 Buildah Project, Redhat | 21 Buildah, Enterprise Linux, Enterprise Linux Eus and 18 more | 2026-03-18 | 7.8 High |
| A vulnerability was found in Buildah. Cache mounts do not properly validate that user-specified paths for the cache are within our cache directory, allowing a `RUN` instruction in a Container file to mount an arbitrary directory from the host (read/write) into the container as long as those files can be accessed by the user running Buildah. | ||||
| CVE-2024-5037 | 1 Redhat | 4 Logging, Openshift, Openshift Container Platform and 1 more | 2026-03-18 | 7.5 High |
| A flaw was found in OpenShift's Telemeter. If certain conditions are in place, an attacker can use a forged token to bypass the issue ("iss") check during JSON web token (JWT) authentication. | ||||
| CVE-2025-5372 | 2 Libssh, Redhat | 5 Libssh, Enterprise Linux, Openshift and 2 more | 2026-03-10 | 5 Medium |
| A flaw was found in libssh versions built with OpenSSL versions older than 3.0, specifically in the ssh_kdf() function responsible for key derivation. Due to inconsistent interpretation of return values where OpenSSL uses 0 to indicate failure and libssh uses 0 for success—the function may mistakenly return a success status even when key derivation fails. This results in uninitialized cryptographic key buffers being used in subsequent communication, potentially compromising SSH sessions' confidentiality, integrity, and availability. | ||||
| CVE-2022-32148 | 2 Golang, Redhat | 19 Go, Acm, Application Interconnect and 16 more | 2026-03-06 | 6.5 Medium |
| Improper exposure of client IP addresses in net/http before Go 1.17.12 and Go 1.18.4 can be triggered by calling httputil.ReverseProxy.ServeHTTP with a Request.Header map containing a nil value for the X-Forwarded-For header, which causes ReverseProxy to set the client IP as the value of the X-Forwarded-For header. | ||||
| CVE-2022-30629 | 2 Golang, Redhat | 15 Go, Acm, Ceph Storage and 12 more | 2026-03-06 | 3.1 Low |
| Non-random values for ticket_age_add in session tickets in crypto/tls before Go 1.17.11 and Go 1.18.3 allow an attacker that can observe TLS handshakes to correlate successive connections by comparing ticket ages during session resumption. | ||||
| CVE-2022-1705 | 2 Golang, Redhat | 22 Go, Acm, Application Interconnect and 19 more | 2026-03-06 | 6.5 Medium |
| Acceptance of some invalid Transfer-Encoding headers in the HTTP/1 client in net/http before Go 1.17.12 and Go 1.18.4 allows HTTP request smuggling if combined with an intermediate server that also improperly fails to reject the header as invalid. | ||||
| CVE-2024-11218 | 1 Redhat | 7 Enterprise Linux, Openshift, Openshift Ironic and 4 more | 2026-03-04 | 8.6 High |
| A vulnerability was found in `podman build` and `buildah.` This issue occurs in a container breakout by using --jobs=2 and a race condition when building a malicious Containerfile. SELinux might mitigate it, but even with SELinux on, it still allows the enumeration of files and directories on the host. | ||||
| CVE-2024-1753 | 1 Redhat | 3 Enterprise Linux, Openshift, Rhel Eus | 2026-03-04 | 8.6 High |
| A flaw was found in Buildah (and subsequently Podman Build) which allows containers to mount arbitrary locations on the host filesystem into build containers. A malicious Containerfile can use a dummy image with a symbolic link to the root filesystem as a mount source and cause the mount operation to mount the host root filesystem inside the RUN step. The commands inside the RUN step will then have read-write access to the host filesystem, allowing for full container escape at build time. | ||||
| CVE-2024-7409 | 1 Redhat | 4 Advanced Virtualization, Enterprise Linux, Openshift and 1 more | 2026-03-02 | N/A |
| A flaw was found in the QEMU NBD Server. This vulnerability allows a denial of service (DoS) attack via improper synchronization during socket closure when a client keeps a socket open as the server is taken offline. | ||||
| CVE-2026-2243 | 2 Red Hat, Redhat | 4 Enterprise Linux, Enterprise Linux, Openshift and 1 more | 2026-03-02 | 5.1 Medium |
| A flaw was found in QEMU. A specially crafted VMDK image could trigger an out-of-bounds read vulnerability, potentially leading to a 12-byte leak of sensitive information or a denial of service condition (DoS). | ||||
| CVE-2024-3652 | 2 Libreswan, Redhat | 7 Libreswan, Enterprise Linux, Openshift and 4 more | 2026-02-27 | 6.5 Medium |
| The Libreswan Project was notified of an issue causing libreswan to restart when using IKEv1 without specifying an esp= line. When the peer requests AES-GMAC, libreswan's default proposal handler causes an assertion failure and crashes and restarts. IKEv2 connections are not affected. | ||||
| CVE-2025-14443 | 1 Redhat | 1 Openshift | 2026-02-27 | 6.4 Medium |
| A flaw was found in ose-openshift-apiserver. This vulnerability allows internal network enumeration, service discovery, limited information disclosure, and potential denial-of-service (DoS) through Server-Side Request Forgery (SSRF) due to missing IP address and network-range validation when processing user-supplied image references. | ||||
| CVE-2025-27516 | 3 Debian, Palletsprojects, Redhat | 11 Debian Linux, Jinja, Ansible Automation Platform and 8 more | 2026-02-26 | 8.8 High |
| Jinja is an extensible templating engine. Prior to 3.1.6, an oversight in how the Jinja sandboxed environment interacts with the |attr filter allows an attacker that controls the content of a template to execute arbitrary Python code. To exploit the vulnerability, an attacker needs to control the content of a template. Whether that is the case depends on the type of application using Jinja. This vulnerability impacts users of applications which execute untrusted templates. Jinja's sandbox does catch calls to str.format and ensures they don't escape the sandbox. However, it's possible to use the |attr filter to get a reference to a string's plain format method, bypassing the sandbox. After the fix, the |attr filter no longer bypasses the environment's attribute lookup. This vulnerability is fixed in 3.1.6. | ||||