Total
34812 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23009 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xhci: sideband: don't dereference freed ring when removing sideband endpoint xhci_sideband_remove_endpoint() incorrecly assumes that the endpoint is running and has a valid transfer ring. Lianqin reported a crash during suspend/wake-up stress testing, and found the cause to be dereferencing a non-existing transfer ring 'ep->ring' during xhci_sideband_remove_endpoint(). The endpoint and its ring may be in unknown state if this function is called after xHCI was reinitialized in resume (lost power), or if device is being re-enumerated, disconnected or endpoint already dropped. Fix this by both removing unnecessary ring access, and by checking ep->ring exists before dereferencing it. Also make sure endpoint is running before attempting to stop it. Remove the xhci_initialize_ring_info() call during sideband endpoint removal as is it only initializes ring structure enqueue, dequeue and cycle state values to their starting values without changing actual hardware enqueue, dequeue and cycle state. Leaving them out of sync is worse than leaving it as it is. The endpoint will get freed in after this in most usecases. If the (audio) class driver want's to reuse the endpoint after offload then it is up to the class driver to ensure endpoint is properly set up. | ||||
| CVE-2026-23011 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: ip_gre: make ipgre_header() robust Analog to commit db5b4e39c4e6 ("ip6_gre: make ip6gre_header() robust") Over the years, syzbot found many ways to crash the kernel in ipgre_header() [1]. This involves team or bonding drivers ability to dynamically change their dev->needed_headroom and/or dev->hard_header_len In this particular crash mld_newpack() allocated an skb with a too small reserve/headroom, and by the time mld_sendpack() was called, syzbot managed to attach an ipgre device. [1] skbuff: skb_under_panic: text:ffffffff89ea3cb7 len:2030915468 put:2030915372 head:ffff888058b43000 data:ffff887fdfa6e194 tail:0x120 end:0x6c0 dev:team0 kernel BUG at net/core/skbuff.c:213 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 1322 Comm: kworker/1:9 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic+0x157/0x160 net/core/skbuff.c:213 Call Trace: <TASK> skb_under_panic net/core/skbuff.c:223 [inline] skb_push+0xc3/0xe0 net/core/skbuff.c:2641 ipgre_header+0x67/0x290 net/ipv4/ip_gre.c:897 dev_hard_header include/linux/netdevice.h:3436 [inline] neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247 NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318 mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 | ||||
| CVE-2026-23014 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf: Ensure swevent hrtimer is properly destroyed With the change to hrtimer_try_to_cancel() in perf_swevent_cancel_hrtimer() it appears possible for the hrtimer to still be active by the time the event gets freed. Make sure the event does a full hrtimer_cancel() on the free path by installing a perf_event::destroy handler. | ||||
| CVE-2025-71078 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/64s/slb: Fix SLB multihit issue during SLB preload On systems using the hash MMU, there is a software SLB preload cache that mirrors the entries loaded into the hardware SLB buffer. This preload cache is subject to periodic eviction — typically after every 256 context switches — to remove old entry. To optimize performance, the kernel skips switch_mmu_context() in switch_mm_irqs_off() when the prev and next mm_struct are the same. However, on hash MMU systems, this can lead to inconsistencies between the hardware SLB and the software preload cache. If an SLB entry for a process is evicted from the software cache on one CPU, and the same process later runs on another CPU without executing switch_mmu_context(), the hardware SLB may retain stale entries. If the kernel then attempts to reload that entry, it can trigger an SLB multi-hit error. The following timeline shows how stale SLB entries are created and can cause a multi-hit error when a process moves between CPUs without a MMU context switch. CPU 0 CPU 1 ----- ----- Process P exec swapper/1 load_elf_binary begin_new_exc activate_mm switch_mm_irqs_off switch_mmu_context switch_slb /* * This invalidates all * the entries in the HW * and setup the new HW * SLB entries as per the * preload cache. */ context_switch sched_migrate_task migrates process P to cpu-1 Process swapper/0 context switch (to process P) (uses mm_struct of Process P) switch_mm_irqs_off() switch_slb load_slb++ /* * load_slb becomes 0 here * and we evict an entry from * the preload cache with * preload_age(). We still * keep HW SLB and preload * cache in sync, that is * because all HW SLB entries * anyways gets evicted in * switch_slb during SLBIA. * We then only add those * entries back in HW SLB, * which are currently * present in preload_cache * (after eviction). */ load_elf_binary continues... setup_new_exec() slb_setup_new_exec() sched_switch event sched_migrate_task migrates process P to cpu-0 context_switch from swapper/0 to Process P switch_mm_irqs_off() /* * Since both prev and next mm struct are same we don't call * switch_mmu_context(). This will cause the HW SLB and SW preload * cache to go out of sync in preload_new_slb_context. Because there * was an SLB entry which was evicted from both HW and preload cache * on cpu-1. Now later in preload_new_slb_context(), when we will try * to add the same preload entry again, we will add this to the SW * preload cache and then will add it to the HW SLB. Since on cpu-0 * this entry was never invalidated, hence adding this entry to the HW * SLB will cause a SLB multi-hit error. */ load_elf_binary cont ---truncated--- | ||||
| CVE-2025-71180 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: counter: interrupt-cnt: Drop IRQF_NO_THREAD flag An IRQ handler can either be IRQF_NO_THREAD or acquire spinlock_t, as CONFIG_PROVE_RAW_LOCK_NESTING warns: ============================= [ BUG: Invalid wait context ] 6.18.0-rc1+git... #1 ----------------------------- some-user-space-process/1251 is trying to lock: (&counter->events_list_lock){....}-{3:3}, at: counter_push_event [counter] other info that might help us debug this: context-{2:2} no locks held by some-user-space-process/.... stack backtrace: CPU: 0 UID: 0 PID: 1251 Comm: some-user-space-process 6.18.0-rc1+git... #1 PREEMPT Call trace: show_stack (C) dump_stack_lvl dump_stack __lock_acquire lock_acquire _raw_spin_lock_irqsave counter_push_event [counter] interrupt_cnt_isr [interrupt_cnt] __handle_irq_event_percpu handle_irq_event handle_simple_irq handle_irq_desc generic_handle_domain_irq gpio_irq_handler handle_irq_desc generic_handle_domain_irq gic_handle_irq call_on_irq_stack do_interrupt_handler el0_interrupt __el0_irq_handler_common el0t_64_irq_handler el0t_64_irq ... and Sebastian correctly points out. Remove IRQF_NO_THREAD as an alternative to switching to raw_spinlock_t, because the latter would limit all potential nested locks to raw_spinlock_t only. | ||||
| CVE-2025-71182 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: j1939: make j1939_session_activate() fail if device is no longer registered syzbot is still reporting unregister_netdevice: waiting for vcan0 to become free. Usage count = 2 even after commit 93a27b5891b8 ("can: j1939: add missing calls in NETDEV_UNREGISTER notification handler") was added. A debug printk() patch found that j1939_session_activate() can succeed even after j1939_cancel_active_session() from j1939_netdev_notify(NETDEV_UNREGISTER) has completed. Since j1939_cancel_active_session() is processed with the session list lock held, checking ndev->reg_state in j1939_session_activate() with the session list lock held can reliably close the race window. | ||||
| CVE-2025-71082 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: revert use of devm_kzalloc in btusb This reverts commit 98921dbd00c4e ("Bluetooth: Use devm_kzalloc in btusb.c file"). In btusb_probe(), we use devm_kzalloc() to allocate the btusb data. This ties the lifetime of all the btusb data to the binding of a driver to one interface, INTF. In a driver that binds to other interfaces, ISOC and DIAG, this is an accident waiting to happen. The issue is revealed in btusb_disconnect(), where calling usb_driver_release_interface(&btusb_driver, data->intf) will have devm free the data that is also being used by the other interfaces of the driver that may not be released yet. To fix this, revert the use of devm and go back to freeing memory explicitly. | ||||
| CVE-2025-71108 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Handle incorrect num_connectors capability The UCSI spec states that the num_connectors field is 7 bits, and the 8th bit is reserved and should be set to zero. Some buggy FW has been known to set this bit, and it can lead to a system not booting. Flag that the FW is not behaving correctly, and auto-fix the value so that the system boots correctly. Found on Lenovo P1 G8 during Linux enablement program. The FW will be fixed, but seemed worth addressing in case it hit platforms that aren't officially Linux supported. | ||||
| CVE-2026-23005 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1 When loading guest XSAVE state via KVM_SET_XSAVE, and when updating XFD in response to a guest WRMSR, clear XFD-disabled features in the saved (or to be restored) XSTATE_BV to ensure KVM doesn't attempt to load state for features that are disabled via the guest's XFD. Because the kernel executes XRSTOR with the guest's XFD, saving XSTATE_BV[i]=1 with XFD[i]=1 will cause XRSTOR to #NM and panic the kernel. E.g. if fpu_update_guest_xfd() sets XFD without clearing XSTATE_BV: ------------[ cut here ]------------ WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#29: amx_test/848 Modules linked in: kvm_intel kvm irqbypass CPU: 29 UID: 1000 PID: 848 Comm: amx_test Not tainted 6.19.0-rc2-ffa07f7fd437-x86_amx_nm_xfd_non_init-vm #171 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:exc_device_not_available+0x101/0x110 Call Trace: <TASK> asm_exc_device_not_available+0x1a/0x20 RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90 switch_fpu_return+0x4a/0xb0 kvm_arch_vcpu_ioctl_run+0x1245/0x1e40 [kvm] kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm] __x64_sys_ioctl+0x8f/0xd0 do_syscall_64+0x62/0x940 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- This can happen if the guest executes WRMSR(MSR_IA32_XFD) to set XFD[18] = 1, and a host IRQ triggers kernel_fpu_begin() prior to the vmexit handler's call to fpu_update_guest_xfd(). and if userspace stuffs XSTATE_BV[i]=1 via KVM_SET_XSAVE: ------------[ cut here ]------------ WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#14: amx_test/867 Modules linked in: kvm_intel kvm irqbypass CPU: 14 UID: 1000 PID: 867 Comm: amx_test Not tainted 6.19.0-rc2-2dace9faccd6-x86_amx_nm_xfd_non_init-vm #168 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:exc_device_not_available+0x101/0x110 Call Trace: <TASK> asm_exc_device_not_available+0x1a/0x20 RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90 fpu_swap_kvm_fpstate+0x6b/0x120 kvm_load_guest_fpu+0x30/0x80 [kvm] kvm_arch_vcpu_ioctl_run+0x85/0x1e40 [kvm] kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm] __x64_sys_ioctl+0x8f/0xd0 do_syscall_64+0x62/0x940 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- The new behavior is consistent with the AMX architecture. Per Intel's SDM, XSAVE saves XSTATE_BV as '0' for components that are disabled via XFD (and non-compacted XSAVE saves the initial configuration of the state component): If XSAVE, XSAVEC, XSAVEOPT, or XSAVES is saving the state component i, the instruction does not generate #NM when XCR0[i] = IA32_XFD[i] = 1; instead, it operates as if XINUSE[i] = 0 (and the state component was in its initial state): it saves bit i of XSTATE_BV field of the XSAVE header as 0; in addition, XSAVE saves the initial configuration of the state component (the other instructions do not save state component i). Alternatively, KVM could always do XRSTOR with XFD=0, e.g. by using a constant XFD based on the set of enabled features when XSAVEing for a struct fpu_guest. However, having XSTATE_BV[i]=1 for XFD-disabled features can only happen in the above interrupt case, or in similar scenarios involving preemption on preemptible kernels, because fpu_swap_kvm_fpstate()'s call to save_fpregs_to_fpstate() saves the outgoing FPU state with the current XFD; and that is (on all but the first WRMSR to XFD) the guest XFD. Therefore, XFD can only go out of sync with XSTATE_BV in the above interrupt case, or in similar scenarios involving preemption on preemptible kernels, and it we can consider it (de facto) part of KVM ABI that KVM_GET_XSAVE returns XSTATE_BV[i]=0 for XFD-disabled features. [Move clea ---truncated--- | ||||
| CVE-2025-71183 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: always detect conflicting inodes when logging inode refs After rename exchanging (either with the rename exchange operation or regular renames in multiple non-atomic steps) two inodes and at least one of them is a directory, we can end up with a log tree that contains only of the inodes and after a power failure that can result in an attempt to delete the other inode when it should not because it was not deleted before the power failure. In some case that delete attempt fails when the target inode is a directory that contains a subvolume inside it, since the log replay code is not prepared to deal with directory entries that point to root items (only inode items). 1) We have directories "dir1" (inode A) and "dir2" (inode B) under the same parent directory; 2) We have a file (inode C) under directory "dir1" (inode A); 3) We have a subvolume inside directory "dir2" (inode B); 4) All these inodes were persisted in a past transaction and we are currently at transaction N; 5) We rename the file (inode C), so at btrfs_log_new_name() we update inode C's last_unlink_trans to N; 6) We get a rename exchange for "dir1" (inode A) and "dir2" (inode B), so after the exchange "dir1" is inode B and "dir2" is inode A. During the rename exchange we call btrfs_log_new_name() for inodes A and B, but because they are directories, we don't update their last_unlink_trans to N; 7) An fsync against the file (inode C) is done, and because its inode has a last_unlink_trans with a value of N we log its parent directory (inode A) (through btrfs_log_all_parents(), called from btrfs_log_inode_parent()). 8) So we end up with inode B not logged, which now has the old name of inode A. At copy_inode_items_to_log(), when logging inode A, we did not check if we had any conflicting inode to log because inode A has a generation lower than the current transaction (created in a past transaction); 9) After a power failure, when replaying the log tree, since we find that inode A has a new name that conflicts with the name of inode B in the fs tree, we attempt to delete inode B... this is wrong since that directory was never deleted before the power failure, and because there is a subvolume inside that directory, attempting to delete it will fail since replay_dir_deletes() and btrfs_unlink_inode() are not prepared to deal with dir items that point to roots instead of inodes. When that happens the mount fails and we get a stack trace like the following: [87.2314] BTRFS info (device dm-0): start tree-log replay [87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259 [87.2332] ------------[ cut here ]------------ [87.2338] BTRFS: Transaction aborted (error -2) [87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs] [87.2368] Modules linked in: btrfs loop dm_thin_pool (...) [87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G W 6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full) [87.2489] Tainted: [W]=WARN [87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs] [87.2538] Code: c0 89 04 24 (...) [87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286 [87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000 [87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff [87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840 [87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0 [87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10 [87.2618] FS: 00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000 [87. ---truncated--- | ||||
| CVE-2025-71072 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: shmem: fix recovery on rename failures maple_tree insertions can fail if we are seriously short on memory; simple_offset_rename() does not recover well if it runs into that. The same goes for simple_offset_rename_exchange(). Moreover, shmem_whiteout() expects that if it succeeds, the caller will progress to d_move(), i.e. that shmem_rename2() won't fail past the successful call of shmem_whiteout(). Not hard to fix, fortunately - mtree_store() can't fail if the index we are trying to store into is already present in the tree as a singleton. For simple_offset_rename_exchange() that's enough - we just need to be careful about the order of operations. For simple_offset_rename() solution is to preinsert the target into the tree for new_dir; the rest can be done without any potentially failing operations. That preinsertion has to be done in shmem_rename2() rather than in simple_offset_rename() itself - otherwise we'd need to deal with the possibility of failure after successful shmem_whiteout(). | ||||
| CVE-2025-71076 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Limit num_syncs to prevent oversized allocations The OA open parameters did not validate num_syncs, allowing userspace to pass arbitrarily large values, potentially leading to excessive allocations. Add check to ensure that num_syncs does not exceed DRM_XE_MAX_SYNCS, returning -EINVAL when the limit is violated. v2: use XE_IOCTL_DBG() and drop duplicated check. (Ashutosh) (cherry picked from commit e057b2d2b8d815df3858a87dffafa2af37e5945b) | ||||
| CVE-2025-71077 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tpm: Cap the number of PCR banks tpm2_get_pcr_allocation() does not cap any upper limit for the number of banks. Cap the limit to eight banks so that out of bounds values coming from external I/O cause on only limited harm. | ||||
| CVE-2025-71088 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fallback earlier on simult connection Syzkaller reports a simult-connect race leading to inconsistent fallback status: WARNING: CPU: 3 PID: 33 at net/mptcp/subflow.c:1515 subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515 Modules linked in: CPU: 3 UID: 0 PID: 33 Comm: ksoftirqd/3 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515 Code: 89 ee e8 78 61 3c f6 40 84 ed 75 21 e8 8e 66 3c f6 44 89 fe bf 07 00 00 00 e8 c1 61 3c f6 41 83 ff 07 74 09 e8 76 66 3c f6 90 <0f> 0b 90 e8 6d 66 3c f6 48 89 df e8 e5 ad ff ff 31 ff 89 c5 89 c6 RSP: 0018:ffffc900006cf338 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888031acd100 RCX: ffffffff8b7f2abf RDX: ffff88801e6ea440 RSI: ffffffff8b7f2aca RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000007 R10: 0000000000000004 R11: 0000000000002c10 R12: ffff88802ba69900 R13: 1ffff920000d9e67 R14: ffff888046f81800 R15: 0000000000000004 FS: 0000000000000000(0000) GS:ffff8880d69bc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000560fc0ca1670 CR3: 0000000032c3a000 CR4: 0000000000352ef0 Call Trace: <TASK> tcp_data_queue+0x13b0/0x4f90 net/ipv4/tcp_input.c:5197 tcp_rcv_state_process+0xfdf/0x4ec0 net/ipv4/tcp_input.c:6922 tcp_v6_do_rcv+0x492/0x1740 net/ipv6/tcp_ipv6.c:1672 tcp_v6_rcv+0x2976/0x41e0 net/ipv6/tcp_ipv6.c:1918 ip6_protocol_deliver_rcu+0x188/0x1520 net/ipv6/ip6_input.c:438 ip6_input_finish+0x1e4/0x4b0 net/ipv6/ip6_input.c:489 NF_HOOK include/linux/netfilter.h:318 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ip6_input+0x105/0x2f0 net/ipv6/ip6_input.c:500 dst_input include/net/dst.h:471 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:318 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x264/0x650 net/ipv6/ip6_input.c:311 __netif_receive_skb_one_core+0x12d/0x1e0 net/core/dev.c:5979 __netif_receive_skb+0x1d/0x160 net/core/dev.c:6092 process_backlog+0x442/0x15e0 net/core/dev.c:6444 __napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7494 napi_poll net/core/dev.c:7557 [inline] net_rx_action+0xa9f/0xfe0 net/core/dev.c:7684 handle_softirqs+0x216/0x8e0 kernel/softirq.c:579 run_ksoftirqd kernel/softirq.c:968 [inline] run_ksoftirqd+0x3a/0x60 kernel/softirq.c:960 smpboot_thread_fn+0x3f7/0xae0 kernel/smpboot.c:160 kthread+0x3c2/0x780 kernel/kthread.c:463 ret_from_fork+0x5d7/0x6f0 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> The TCP subflow can process the simult-connect syn-ack packet after transitioning to TCP_FIN1 state, bypassing the MPTCP fallback check, as the sk_state_change() callback is not invoked for * -> FIN_WAIT1 transitions. That will move the msk socket to an inconsistent status and the next incoming data will hit the reported splat. Close the race moving the simult-fallback check at the earliest possible stage - that is at syn-ack generation time. About the fixes tags: [2] was supposed to also fix this issue introduced by [3]. [1] is required as a dependence: it was not explicitly marked as a fix, but it is one and it has already been backported before [3]. In other words, this commit should be backported up to [3], including [2] and [1] if that's not already there. | ||||
| CVE-2025-71102 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scs: fix a wrong parameter in __scs_magic __scs_magic() needs a 'void *' variable, but a 'struct task_struct *' is given. 'task_scs(tsk)' is the starting address of the task's shadow call stack, and '__scs_magic(task_scs(tsk))' is the end address of the task's shadow call stack. Here should be '__scs_magic(task_scs(tsk))'. The user-visible effect of this bug is that when CONFIG_DEBUG_STACK_USAGE is enabled, the shadow call stack usage checking function (scs_check_usage) would scan an incorrect memory range. This could lead 1. **Inaccurate stack usage reporting**: The function would calculate wrong usage statistics for the shadow call stack, potentially showing incorrect value in kmsg. 2. **Potential kernel crash**: If the value of __scs_magic(tsk)is greater than that of __scs_magic(task_scs(tsk)), the for loop may access unmapped memory, potentially causing a kernel panic. However, this scenario is unlikely because task_struct is allocated via the slab allocator (which typically returns lower addresses), while the shadow call stack returned by task_scs(tsk) is allocated via vmalloc(which typically returns higher addresses). However, since this is purely a debugging feature (CONFIG_DEBUG_STACK_USAGE), normal production systems should be not unaffected. The bug only impacts developers and testers who are actively debugging stack usage with this configuration enabled. | ||||
| CVE-2025-71105 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: use global inline_xattr_slab instead of per-sb slab cache As Hong Yun reported in mailing list: loop7: detected capacity change from 0 to 131072 ------------[ cut here ]------------ kmem_cache of name 'f2fs_xattr_entry-7:7' already exists WARNING: CPU: 0 PID: 24426 at mm/slab_common.c:110 kmem_cache_sanity_check mm/slab_common.c:109 [inline] WARNING: CPU: 0 PID: 24426 at mm/slab_common.c:110 __kmem_cache_create_args+0xa6/0x320 mm/slab_common.c:307 CPU: 0 UID: 0 PID: 24426 Comm: syz.7.1370 Not tainted 6.17.0-rc4 #1 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:kmem_cache_sanity_check mm/slab_common.c:109 [inline] RIP: 0010:__kmem_cache_create_args+0xa6/0x320 mm/slab_common.c:307 Call Trace: __kmem_cache_create include/linux/slab.h:353 [inline] f2fs_kmem_cache_create fs/f2fs/f2fs.h:2943 [inline] f2fs_init_xattr_caches+0xa5/0xe0 fs/f2fs/xattr.c:843 f2fs_fill_super+0x1645/0x2620 fs/f2fs/super.c:4918 get_tree_bdev_flags+0x1fb/0x260 fs/super.c:1692 vfs_get_tree+0x43/0x140 fs/super.c:1815 do_new_mount+0x201/0x550 fs/namespace.c:3808 do_mount fs/namespace.c:4136 [inline] __do_sys_mount fs/namespace.c:4347 [inline] __se_sys_mount+0x298/0x2f0 fs/namespace.c:4324 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x8e/0x3a0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e The bug can be reproduced w/ below scripts: - mount /dev/vdb /mnt1 - mount /dev/vdc /mnt2 - umount /mnt1 - mounnt /dev/vdb /mnt1 The reason is if we created two slab caches, named f2fs_xattr_entry-7:3 and f2fs_xattr_entry-7:7, and they have the same slab size. Actually, slab system will only create one slab cache core structure which has slab name of "f2fs_xattr_entry-7:3", and two slab caches share the same structure and cache address. So, if we destroy f2fs_xattr_entry-7:3 cache w/ cache address, it will decrease reference count of slab cache, rather than release slab cache entirely, since there is one more user has referenced the cache. Then, if we try to create slab cache w/ name "f2fs_xattr_entry-7:3" again, slab system will find that there is existed cache which has the same name and trigger the warning. Let's changes to use global inline_xattr_slab instead of per-sb slab cache for fixing. | ||||
| CVE-2025-71106 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs: PM: Fix reverse check in filesystems_freeze_callback() The freeze_all_ptr check in filesystems_freeze_callback() introduced by commit a3f8f8662771 ("power: always freeze efivarfs") is reverse which quite confusingly causes all file systems to be frozen when filesystem_freeze_enabled is false. On my systems it causes the WARN_ON_ONCE() in __set_task_frozen() to trigger, most likely due to an attempt to freeze a file system that is not ready for that. Add a logical negation to the check in question to reverse it as appropriate. | ||||
| CVE-2025-71129 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Sign extend kfunc call arguments The kfunc calls are native calls so they should follow LoongArch calling conventions. Sign extend its arguments properly to avoid kernel panic. This is done by adding a new emit_abi_ext() helper. The emit_abi_ext() helper performs extension in place meaning a value already store in the target register (Note: this is different from the existing sign_extend() helper and thus we can't reuse it). | ||||
| CVE-2025-71128 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erspan: Initialize options_len before referencing options. The struct ip_tunnel_info has a flexible array member named options that is protected by a counted_by(options_len) attribute. The compiler will use this information to enforce runtime bounds checking deployed by FORTIFY_SOURCE string helpers. As laid out in the GCC documentation, the counter must be initialized before the first reference to the flexible array member. After scanning through the files that use struct ip_tunnel_info and also refer to options or options_len, it appears the normal case is to use the ip_tunnel_info_opts_set() helper. Said helper would initialize options_len properly before copying data into options, however in the GRE ERSPAN code a partial update is done, preventing the use of the helper function. Before this change the handling of ERSPAN traffic in GRE tunnels would cause a kernel panic when the kernel is compiled with GCC 15+ and having FORTIFY_SOURCE configured: memcpy: detected buffer overflow: 4 byte write of buffer size 0 Call Trace: <IRQ> __fortify_panic+0xd/0xf erspan_rcv.cold+0x68/0x83 ? ip_route_input_slow+0x816/0x9d0 gre_rcv+0x1b2/0x1c0 gre_rcv+0x8e/0x100 ? raw_v4_input+0x2a0/0x2b0 ip_protocol_deliver_rcu+0x1ea/0x210 ip_local_deliver_finish+0x86/0x110 ip_local_deliver+0x65/0x110 ? ip_rcv_finish_core+0xd6/0x360 ip_rcv+0x186/0x1a0 Reported-at: https://launchpad.net/bugs/2129580 | ||||
| CVE-2025-71127 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Discard Beacon frames to non-broadcast address Beacon frames are required to be sent to the broadcast address, see IEEE Std 802.11-2020, 11.1.3.1 ("The Address 1 field of the Beacon .. frame shall be set to the broadcast address"). A unicast Beacon frame might be used as a targeted attack to get one of the associated STAs to do something (e.g., using CSA to move it to another channel). As such, it is better have strict filtering for this on the received side and discard all Beacon frames that are sent to an unexpected address. This is even more important for cases where beacon protection is used. The current implementation in mac80211 is correctly discarding unicast Beacon frames if the Protected Frame bit in the Frame Control field is set to 0. However, if that bit is set to 1, the logic used for checking for configured BIGTK(s) does not actually work. If the driver does not have logic for dropping unicast Beacon frames with Protected Frame bit 1, these frames would be accepted in mac80211 processing as valid Beacon frames even though they are not protected. This would allow beacon protection to be bypassed. While the logic for checking beacon protection could be extended to cover this corner case, a more generic check for discard all Beacon frames based on A1=unicast address covers this without needing additional changes. Address all these issues by dropping received Beacon frames if they are sent to a non-broadcast address. | ||||