Filtered by vendor Linux
Subscriptions
Total
14339 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-41062 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bluetooth/l2cap: sync sock recv cb and release The problem occurs between the system call to close the sock and hci_rx_work, where the former releases the sock and the latter accesses it without lock protection. CPU0 CPU1 ---- ---- sock_close hci_rx_work l2cap_sock_release hci_acldata_packet l2cap_sock_kill l2cap_recv_frame sk_free l2cap_conless_channel l2cap_sock_recv_cb If hci_rx_work processes the data that needs to be received before the sock is closed, then everything is normal; Otherwise, the work thread may access the released sock when receiving data. Add a chan mutex in the rx callback of the sock to achieve synchronization between the sock release and recv cb. Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer. | ||||
| CVE-2024-41065 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Whitelist dtl slub object for copying to userspace Reading the dispatch trace log from /sys/kernel/debug/powerpc/dtl/cpu-* results in a BUG() when the config CONFIG_HARDENED_USERCOPY is enabled as shown below. kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth pseries_wdt dm_multipath dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 27 PID: 1815 Comm: python3 Not tainted 6.10.0-rc3 #85 Hardware name: IBM,9040-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_042) hv:phyp pSeries NIP: c0000000005d23d4 LR: c0000000005d23d0 CTR: 00000000006ee6f8 REGS: c000000120c078c0 TRAP: 0700 Not tainted (6.10.0-rc3) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 2828220f XER: 0000000e CFAR: c0000000001fdc80 IRQMASK: 0 [ ... GPRs omitted ... ] NIP [c0000000005d23d4] usercopy_abort+0x78/0xb0 LR [c0000000005d23d0] usercopy_abort+0x74/0xb0 Call Trace: usercopy_abort+0x74/0xb0 (unreliable) __check_heap_object+0xf8/0x120 check_heap_object+0x218/0x240 __check_object_size+0x84/0x1a4 dtl_file_read+0x17c/0x2c4 full_proxy_read+0x8c/0x110 vfs_read+0xdc/0x3a0 ksys_read+0x84/0x144 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec --- interrupt: 3000 at 0x7fff81f3ab34 Commit 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0") requires that only whitelisted areas in slab/slub objects can be copied to userspace when usercopy hardening is enabled using CONFIG_HARDENED_USERCOPY. Dtl contains hypervisor dispatch events which are expected to be read by privileged users. Hence mark this safe for user access. Specify useroffset=0 and usersize=DISPATCH_LOG_BYTES to whitelist the entire object. | ||||
| CVE-2024-41067 | 1 Linux | 1 Linux Kernel | 2025-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: scrub: handle RST lookup error correctly [BUG] When running btrfs/060 with forced RST feature, it would crash the following ASSERT() inside scrub_read_endio(): ASSERT(sector_nr < stripe->nr_sectors); Before that, we would have tree dump from btrfs_get_raid_extent_offset(), as we failed to find the RST entry for the range. [CAUSE] Inside scrub_submit_extent_sector_read() every time we allocated a new bbio we immediately called btrfs_map_block() to make sure there was some RST range covering the scrub target. But if btrfs_map_block() fails, we immediately call endio for the bbio, while the bbio is newly allocated, it's completely empty. Then inside scrub_read_endio(), we go through the bvecs to find the sector number (as bi_sector is no longer reliable if the bio is submitted to lower layers). And since the bio is empty, such bvecs iteration would not find any sector matching the sector, and return sector_nr == stripe->nr_sectors, triggering the ASSERT(). [FIX] Instead of calling btrfs_map_block() after allocating a new bbio, call btrfs_map_block() first. Since our only objective of calling btrfs_map_block() is only to update stripe_len, there is really no need to do that after btrfs_alloc_bio(). This new timing would avoid the problem of handling empty bbio completely, and in fact fixes a possible race window for the old code, where if the submission thread is the only owner of the pending_io, the scrub would never finish (since we didn't decrease the pending_io counter). Although the root cause of RST lookup failure still needs to be addressed. | ||||
| CVE-2024-41068 | 1 Linux | 1 Linux Kernel | 2025-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/sclp: Fix sclp_init() cleanup on failure If sclp_init() fails it only partially cleans up: if there are multiple failing calls to sclp_init() sclp_state_change_event will be added several times to sclp_reg_list, which results in the following warning: ------------[ cut here ]------------ list_add double add: new=000003ffe1598c10, prev=000003ffe1598bf0, next=000003ffe1598c10. WARNING: CPU: 0 PID: 1 at lib/list_debug.c:35 __list_add_valid_or_report+0xde/0xf8 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc3 Krnl PSW : 0404c00180000000 000003ffe0d6076a (__list_add_valid_or_report+0xe2/0xf8) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 ... Call Trace: [<000003ffe0d6076a>] __list_add_valid_or_report+0xe2/0xf8 ([<000003ffe0d60766>] __list_add_valid_or_report+0xde/0xf8) [<000003ffe0a8d37e>] sclp_init+0x40e/0x450 [<000003ffe00009f2>] do_one_initcall+0x42/0x1e0 [<000003ffe15b77a6>] do_initcalls+0x126/0x150 [<000003ffe15b7a0a>] kernel_init_freeable+0x1ba/0x1f8 [<000003ffe0d6650e>] kernel_init+0x2e/0x180 [<000003ffe000301c>] __ret_from_fork+0x3c/0x60 [<000003ffe0d759ca>] ret_from_fork+0xa/0x30 Fix this by removing sclp_state_change_event from sclp_reg_list when sclp_init() fails. | ||||
| CVE-2024-41075 | 1 Linux | 1 Linux Kernel | 2025-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: add consistency check for copen/cread This prevents malicious processes from completing random copen/cread requests and crashing the system. Added checks are listed below: * Generic, copen can only complete open requests, and cread can only complete read requests. * For copen, ondemand_id must not be 0, because this indicates that the request has not been read by the daemon. * For cread, the object corresponding to fd and req should be the same. | ||||
| CVE-2024-41072 | 1 Linux | 1 Linux Kernel | 2025-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: wext: add extra SIOCSIWSCAN data check In 'cfg80211_wext_siwscan()', add extra check whether number of channels passed via 'ioctl(sock, SIOCSIWSCAN, ...)' doesn't exceed IW_MAX_FREQUENCIES and reject invalid request with -EINVAL otherwise. | ||||
| CVE-2024-41079 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: always initialize cqe.result The spec doesn't mandate that the first two double words (aka results) for the command queue entry need to be set to 0 when they are not used (not specified). Though, the target implemention returns 0 for TCP and FC but not for RDMA. Let's make RDMA behave the same and thus explicitly initializing the result field. This prevents leaking any data from the stack. | ||||
| CVE-2024-41081 | 1 Linux | 1 Linux Kernel | 2025-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ila: block BH in ila_output() As explained in commit 1378817486d6 ("tipc: block BH before using dst_cache"), net/core/dst_cache.c helpers need to be called with BH disabled. ila_output() is called from lwtunnel_output() possibly from process context, and under rcu_read_lock(). We might be interrupted by a softirq, re-enter ila_output() and corrupt dst_cache data structures. Fix the race by using local_bh_disable(). | ||||
| CVE-2024-41082 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme-fabrics: use reserved tag for reg read/write command In some scenarios, if too many commands are issued by nvme command in the same time by user tasks, this may exhaust all tags of admin_q. If a reset (nvme reset or IO timeout) occurs before these commands finish, reconnect routine may fail to update nvme regs due to insufficient tags, which will cause kernel hang forever. In order to workaround this issue, maybe we can let reg_read32()/reg_read64()/reg_write32() use reserved tags. This maybe safe for nvmf: 1. For the disable ctrl path, we will not issue connect command 2. For the enable ctrl / fw activate path, since connect and reg_xx() are called serially. So the reserved tags may still be enough while reg_xx() use reserved tags. | ||||
| CVE-2024-41086 | 1 Linux | 1 Linux Kernel | 2025-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bcachefs: Fix sb_field_downgrade validation - bch2_sb_downgrade_validate() wasn't checking for a downgrade entry extending past the end of the superblock section - for_each_downgrade_entry() is used in to_text() and needs to work on malformed input; it also was missing a check for a field extending past the end of the section | ||||
| CVE-2025-39959 | 1 Linux | 1 Linux Kernel | 2025-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp: Fix incorrect retrival of acp_chip_info Use dev_get_drvdata(dev->parent) instead of dev_get_platdata(dev) to correctly obtain acp_chip_info members in the acp I2S driver. Previously, some members were not updated properly due to incorrect data access, which could potentially lead to null pointer dereferences. This issue was missed in the earlier commit ("ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot"), which only addressed set_tdm_slot(). This change ensures that all relevant functions correctly retrieve acp_chip_info, preventing further null pointer dereference issues. | ||||
| CVE-2025-39955 | 1 Linux | 1 Linux Kernel | 2025-10-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect(). syzbot reported the splat below where a socket had tcp_sk(sk)->fastopen_rsk in the TCP_ESTABLISHED state. [0] syzbot reused the server-side TCP Fast Open socket as a new client before the TFO socket completes 3WHS: 1. accept() 2. connect(AF_UNSPEC) 3. connect() to another destination As of accept(), sk->sk_state is TCP_SYN_RECV, and tcp_disconnect() changes it to TCP_CLOSE and makes connect() possible, which restarts timers. Since tcp_disconnect() forgot to clear tcp_sk(sk)->fastopen_rsk, the retransmit timer triggered the warning and the intended packet was not retransmitted. Let's call reqsk_fastopen_remove() in tcp_disconnect(). [0]: WARNING: CPU: 2 PID: 0 at net/ipv4/tcp_timer.c:542 tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7)) Modules linked in: CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.17.0-rc5-g201825fb4278 #62 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7)) Code: 41 55 41 54 55 53 48 8b af b8 08 00 00 48 89 fb 48 85 ed 0f 84 55 01 00 00 0f b6 47 12 3c 03 74 0c 0f b6 47 12 3c 04 74 04 90 <0f> 0b 90 48 8b 85 c0 00 00 00 48 89 ef 48 8b 40 30 e8 6a 4f 06 3e RSP: 0018:ffffc900002f8d40 EFLAGS: 00010293 RAX: 0000000000000002 RBX: ffff888106911400 RCX: 0000000000000017 RDX: 0000000002517619 RSI: ffffffff83764080 RDI: ffff888106911400 RBP: ffff888106d5c000 R08: 0000000000000001 R09: ffffc900002f8de8 R10: 00000000000000c2 R11: ffffc900002f8ff8 R12: ffff888106911540 R13: ffff888106911480 R14: ffff888106911840 R15: ffffc900002f8de0 FS: 0000000000000000(0000) GS:ffff88907b768000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8044d69d90 CR3: 0000000002c30003 CR4: 0000000000370ef0 Call Trace: <IRQ> tcp_write_timer (net/ipv4/tcp_timer.c:738) call_timer_fn (kernel/time/timer.c:1747) __run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2372) timer_expire_remote (kernel/time/timer.c:2385 kernel/time/timer.c:2376 kernel/time/timer.c:2135) tmigr_handle_remote_up (kernel/time/timer_migration.c:944 kernel/time/timer_migration.c:1035) __walk_groups.isra.0 (kernel/time/timer_migration.c:533 (discriminator 1)) tmigr_handle_remote (kernel/time/timer_migration.c:1096) handle_softirqs (./arch/x86/include/asm/jump_label.h:36 ./include/trace/events/irq.h:142 kernel/softirq.c:580) irq_exit_rcu (kernel/softirq.c:614 kernel/softirq.c:453 kernel/softirq.c:680 kernel/softirq.c:696) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1050 (discriminator 35) arch/x86/kernel/apic/apic.c:1050 (discriminator 35)) </IRQ> | ||||
| CVE-2025-39957 | 1 Linux | 1 Linux Kernel | 2025-10-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: increase scan_ies_len for S1G Currently the S1G capability element is not taken into account for the scan_ies_len, which leads to a buffer length validation failure in ieee80211_prep_hw_scan() and subsequent WARN in __ieee80211_start_scan(). This prevents hw scanning from functioning. To fix ensure we accommodate for the S1G capability length. | ||||
| CVE-2025-39954 | 1 Linux | 1 Linux Kernel | 2025-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clk: sunxi-ng: mp: Fix dual-divider clock rate readback When dual-divider clock support was introduced, the P divider offset was left out of the .recalc_rate readback function. This causes the clock rate to become bogus or even zero (possibly due to the P divider being 1, leading to a divide-by-zero). Fix this by incorporating the P divider offset into the calculation. | ||||
| CVE-2025-39958 | 1 Linux | 1 Linux Kernel | 2025-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/s390: Make attach succeed when the device was surprise removed When a PCI device is removed with surprise hotplug, there may still be attempts to attach the device to the default domain as part of tear down via (__iommu_release_dma_ownership()), or because the removal happens during probe (__iommu_probe_device()). In both cases zpci_register_ioat() fails with a cc value indicating that the device handle is invalid. This is because the device is no longer part of the instance as far as the hypervisor is concerned. Currently this leads to an error return and s390_iommu_attach_device() fails. This triggers the WARN_ON() in __iommu_group_set_domain_nofail() because attaching to the default domain must never fail. With the device fenced by the hypervisor no DMAs to or from memory are possible and the IOMMU translations have no effect. Proceed as if the registration was successful and let the hotplug event handling clean up the device. This is similar to how devices in the error state are handled since commit 59bbf596791b ("iommu/s390: Make attach succeed even if the device is in error state") except that for removal the domain will not be registered later. This approach was also previously discussed at the link. Handle both cases, error state and removal, in a helper which checks if the error needs to be propagated or ignored. Avoid magic number condition codes by using the pre-existing, but never used, defines for PCI load/store condition codes and rename them to reflect that they apply to all PCI instructions. | ||||
| CVE-2025-39956 | 1 Linux | 1 Linux Kernel | 2025-10-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: igc: don't fail igc_probe() on LED setup error When igc_led_setup() fails, igc_probe() fails and triggers kernel panic in free_netdev() since unregister_netdev() is not called. [1] This behavior can be tested using fault-injection framework, especially the failslab feature. [2] Since LED support is not mandatory, treat LED setup failures as non-fatal and continue probe with a warning message, consequently avoiding the kernel panic. [1] kernel BUG at net/core/dev.c:12047! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 937 Comm: repro-igc-led-e Not tainted 6.17.0-rc4-enjuk-tnguy-00865-gc4940196ab02 #64 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:free_netdev+0x278/0x2b0 [...] Call Trace: <TASK> igc_probe+0x370/0x910 local_pci_probe+0x3a/0x80 pci_device_probe+0xd1/0x200 [...] [2] #!/bin/bash -ex FAILSLAB_PATH=/sys/kernel/debug/failslab/ DEVICE=0000:00:05.0 START_ADDR=$(grep " igc_led_setup" /proc/kallsyms \ | awk '{printf("0x%s", $1)}') END_ADDR=$(printf "0x%x" $((START_ADDR + 0x100))) echo $START_ADDR > $FAILSLAB_PATH/require-start echo $END_ADDR > $FAILSLAB_PATH/require-end echo 1 > $FAILSLAB_PATH/times echo 100 > $FAILSLAB_PATH/probability echo N > $FAILSLAB_PATH/ignore-gfp-wait echo $DEVICE > /sys/bus/pci/drivers/igc/bind | ||||
| CVE-2024-0646 | 2 Linux, Redhat | 8 Linux Kernel, Enterprise Linux, Logging and 5 more | 2025-10-09 | 7 High |
| An out-of-bounds memory write flaw was found in the Linux kernel’s Transport Layer Security functionality in how a user calls a function splice with a ktls socket as the destination. This flaw allows a local user to crash or potentially escalate their privileges on the system. | ||||
| CVE-2024-0193 | 2 Linux, Redhat | 5 Linux Kernel, Enterprise Linux, Logging and 2 more | 2025-10-09 | 7.8 High |
| A use-after-free flaw was found in the netfilter subsystem of the Linux kernel. If the catchall element is garbage-collected when the pipapo set is removed, the element can be deactivated twice. This can cause a use-after-free issue on an NFT_CHAIN object or NFT_OBJECT object, allowing a local unprivileged user with CAP_NET_ADMIN capability to escalate their privileges on the system. | ||||
| CVE-2023-3812 | 2 Linux, Redhat | 7 Linux Kernel, Enterprise Linux, Rhel Aus and 4 more | 2025-10-09 | 7.8 High |
| An out-of-bounds memory access flaw was found in the Linux kernel’s TUN/TAP device driver functionality in how a user generates a malicious (too big) networking packet when napi frags is enabled. This flaw allows a local user to crash or potentially escalate their privileges on the system. | ||||
| CVE-2022-50450 | 1 Linux | 1 Linux Kernel | 2025-10-09 | 5.5 Medium |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||