Filtered by vendor Redhat
Subscriptions
Filtered by product Openshift
Subscriptions
Total
1078 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-53150 | 2 Linux, Redhat | 9 Linux Kernel, Enterprise Linux, Openshift and 6 more | 2025-06-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix out of bounds reads when finding clock sources The current USB-audio driver code doesn't check bLength of each descriptor at traversing for clock descriptors. That is, when a device provides a bogus descriptor with a shorter bLength, the driver might hit out-of-bounds reads. For addressing it, this patch adds sanity checks to the validator functions for the clock descriptor traversal. When the descriptor length is shorter than expected, it's skipped in the loop. For the clock source and clock multiplier descriptors, we can just check bLength against the sizeof() of each descriptor type. OTOH, the clock selector descriptor of UAC2 and UAC3 has an array of bNrInPins elements and two more fields at its tail, hence those have to be checked in addition to the sizeof() check. | ||||
| CVE-2024-53197 | 2 Linux, Redhat | 9 Linux Kernel, Enterprise Linux, Openshift and 6 more | 2025-06-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices A bogus device can provide a bNumConfigurations value that exceeds the initial value used in usb_get_configuration for allocating dev->config. This can lead to out-of-bounds accesses later, e.g. in usb_destroy_configuration. | ||||
| CVE-2025-0620 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-06-09 | 6.6 Medium |
| A flaw was found in Samba. The smbd service daemon does not pick up group membership changes when re-authenticating an expired SMB session. This issue can expose file shares until clients disconnect and then connect again. | ||||
| CVE-2024-9675 | 2 Buildah Project, Redhat | 21 Buildah, Enterprise Linux, Enterprise Linux Eus and 18 more | 2025-06-09 | 7.8 High |
| A vulnerability was found in Buildah. Cache mounts do not properly validate that user-specified paths for the cache are within our cache directory, allowing a `RUN` instruction in a Container file to mount an arbitrary directory from the host (read/write) into the container as long as those files can be accessed by the user running Buildah. | ||||
| CVE-2024-9407 | 1 Redhat | 3 Enterprise Linux, Openshift, Rhel Eus | 2025-06-09 | 4.7 Medium |
| A vulnerability exists in the bind-propagation option of the Dockerfile RUN --mount instruction. The system does not properly validate the input passed to this option, allowing users to pass arbitrary parameters to the mount instruction. This issue can be exploited to mount sensitive directories from the host into a container during the build process and, in some cases, modify the contents of those mounted files. Even if SELinux is used, this vulnerability can bypass its protection by allowing the source directory to be relabeled to give the container access to host files. | ||||
| CVE-2024-3056 | 3 Fedoraproject, Podman Project, Redhat | 5 Fedora, Podman, Enterprise Linux and 2 more | 2025-06-03 | 7.7 High |
| A flaw was found in Podman. This issue may allow an attacker to create a specially crafted container that, when configured to share the same IPC with at least one other container, can create a large number of IPC resources in /dev/shm. The malicious container will continue to exhaust resources until it is out-of-memory (OOM) killed. While the malicious container's cgroup will be removed, the IPC resources it created are not. Those resources are tied to the IPC namespace that will not be removed until all containers using it are stopped, and one non-malicious container is holding the namespace open. The malicious container is restarted, either automatically or by attacker control, repeating the process and increasing the amount of memory consumed. With a container configured to restart always, such as `podman run --restart=always`, this can result in a memory-based denial of service of the system. | ||||
| CVE-2024-7079 | 1 Redhat | 2 Openshift, Openshift Container Platform | 2025-06-03 | 6.5 Medium |
| A flaw was found in the Openshift console. The /API/helm/verify endpoint is tasked to fetch and verify the installation of a Helm chart from a URI that is remote HTTP/HTTPS or local. Access to this endpoint is gated by the authHandlerWithUser() middleware function. Contrary to its name, this middleware function does not verify the validity of the user's credentials. As a result, unauthenticated users can access this endpoint. | ||||
| CVE-2024-7409 | 1 Redhat | 4 Advanced Virtualization, Enterprise Linux, Openshift and 1 more | 2025-06-03 | N/A |
| A flaw was found in the QEMU NBD Server. This vulnerability allows a denial of service (DoS) attack via improper synchronization during socket closure when a client keeps a socket open as the server is taken offline. | ||||
| CVE-2024-6119 | 3 Netapp, Openssl, Redhat | 34 500f, 500f Firmware, A250 and 31 more | 2025-06-03 | 7.5 High |
| Issue summary: Applications performing certificate name checks (e.g., TLS clients checking server certificates) may attempt to read an invalid memory address resulting in abnormal termination of the application process. Impact summary: Abnormal termination of an application can a cause a denial of service. Applications performing certificate name checks (e.g., TLS clients checking server certificates) may attempt to read an invalid memory address when comparing the expected name with an `otherName` subject alternative name of an X.509 certificate. This may result in an exception that terminates the application program. Note that basic certificate chain validation (signatures, dates, ...) is not affected, the denial of service can occur only when the application also specifies an expected DNS name, Email address or IP address. TLS servers rarely solicit client certificates, and even when they do, they generally don't perform a name check against a reference identifier (expected identity), but rather extract the presented identity after checking the certificate chain. So TLS servers are generally not affected and the severity of the issue is Moderate. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. | ||||
| CVE-2024-52615 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-06-02 | 5.3 Medium |
| A flaw was found in Avahi-daemon, which relies on fixed source ports for wide-area DNS queries. This issue simplifies attacks where malicious DNS responses are injected. | ||||
| CVE-2025-26465 | 4 Debian, Netapp, Openbsd and 1 more | 9 Debian Linux, Active Iq Unified Manager, Ontap and 6 more | 2025-06-02 | 6.8 Medium |
| A vulnerability was found in OpenSSH when the VerifyHostKeyDNS option is enabled. A machine-in-the-middle attack can be performed by a malicious machine impersonating a legit server. This issue occurs due to how OpenSSH mishandles error codes in specific conditions when verifying the host key. For an attack to be considered successful, the attacker needs to manage to exhaust the client's memory resource first, turning the attack complexity high. | ||||
| CVE-2024-8176 | 1 Redhat | 9 Devworkspace, Discovery, Enterprise Linux and 6 more | 2025-06-02 | 7.5 High |
| A stack overflow vulnerability exists in the libexpat library due to the way it handles recursive entity expansion in XML documents. When parsing an XML document with deeply nested entity references, libexpat can be forced to recurse indefinitely, exhausting the stack space and causing a crash. This issue could lead to denial of service (DoS) or, in some cases, exploitable memory corruption, depending on the environment and library usage. | ||||
| CVE-2024-12243 | 1 Redhat | 4 Discovery, Enterprise Linux, Openshift and 1 more | 2025-06-02 | 5.3 Medium |
| A flaw was found in GnuTLS, which relies on libtasn1 for ASN.1 data processing. Due to an inefficient algorithm in libtasn1, decoding certain DER-encoded certificate data can take excessive time, leading to increased resource consumption. This flaw allows a remote attacker to send a specially crafted certificate, causing GnuTLS to become unresponsive or slow, resulting in a denial-of-service condition. | ||||
| CVE-2024-12133 | 1 Redhat | 4 Discovery, Enterprise Linux, Openshift and 1 more | 2025-06-02 | 5.3 Medium |
| A flaw in libtasn1 causes inefficient handling of specific certificate data. When processing a large number of elements in a certificate, libtasn1 takes much longer than expected, which can slow down or even crash the system. This flaw allows an attacker to send a specially crafted certificate, causing a denial of service attack. | ||||
| CVE-2024-0567 | 5 Debian, Fedoraproject, Gnu and 2 more | 9 Debian Linux, Fedora, Gnutls and 6 more | 2025-06-02 | 7.5 High |
| A vulnerability was found in GnuTLS, where a cockpit (which uses gnuTLS) rejects a certificate chain with distributed trust. This issue occurs when validating a certificate chain with cockpit-certificate-ensure. This flaw allows an unauthenticated, remote client or attacker to initiate a denial of service attack. | ||||
| CVE-2024-2905 | 1 Redhat | 3 Enterprise Linux, Openshift, Rhel Eus | 2025-05-29 | 6.2 Medium |
| A security vulnerability has been discovered within rpm-ostree, pertaining to the /etc/shadow file in default builds having the world-readable bit enabled. This issue arises from the default permissions being set at a higher level than recommended, potentially exposing sensitive authentication data to unauthorized access. | ||||
| CVE-2022-2995 | 2 Kubernetes, Redhat | 2 Cri-o, Openshift | 2025-05-29 | 7.1 High |
| Incorrect handling of the supplementary groups in the CRI-O container engine might lead to sensitive information disclosure or possible data modification if an attacker has direct access to the affected container where supplementary groups are used to set access permissions and is able to execute a binary code in that container. | ||||
| CVE-2025-1118 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-05-29 | 4.4 Medium |
| A flaw was found in grub2. Grub's dump command is not blocked when grub is in lockdown mode, which allows the user to read any memory information, and an attacker may leverage this in order to extract signatures, salts, and other sensitive information from the memory. | ||||
| CVE-2025-0677 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-05-29 | 6.4 Medium |
| A flaw was found in grub2. When performing a symlink lookup, the grub's UFS module checks the inode's data size to allocate the internal buffer to read the file content, however, it fails to check if the symlink data size has overflown. When this occurs, grub_malloc() may be called with a smaller value than needed. When further reading the data from the disk into the buffer, the grub_ufs_lookup_symlink() function will write past the end of the allocated size. An attack can leverage this by crafting a malicious filesystem, and as a result, it will corrupt data stored in the heap, allowing for arbitrary code execution used to by-pass secure boot mechanisms. | ||||
| CVE-2025-0622 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-05-29 | 6.4 Medium |
| A flaw was found in command/gpg. In some scenarios, hooks created by loaded modules are not removed when the related module is unloaded. This flaw allows an attacker to force grub2 to call the hooks once the module that registered it was unloaded, leading to a use-after-free vulnerability. If correctly exploited, this vulnerability may result in arbitrary code execution, eventually allowing the attacker to bypass secure boot protections. | ||||