Filtered by vendor Redhat
Subscriptions
Filtered by product Enterprise Linux
Subscriptions
Total
15488 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-0217 | 3 Fedoraproject, Packagekit Project, Redhat | 3 Fedora, Packagekit, Enterprise Linux | 2025-09-02 | 3.3 Low |
| A use-after-free flaw was found in PackageKitd. In some conditions, the order of cleanup mechanics for a transaction could be impacted. As a result, some memory access could occur on memory regions that were previously freed. Once freed, a memory region can be reused for other allocations and any previously stored data in this memory region is considered lost. | ||||
| CVE-2023-7216 | 2 Gnu, Redhat | 2 Cpio, Enterprise Linux | 2025-09-02 | 5.3 Medium |
| A path traversal vulnerability was found in the CPIO utility. This issue could allow a remote unauthenticated attacker to trick a user into opening a specially crafted archive. During the extraction process, the archiver could follow symlinks outside of the intended directory, which allows files to be written in arbitrary directories through symlinks. | ||||
| CVE-2023-7042 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-02 | 4.4 Medium |
| A null pointer dereference vulnerability was found in ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev() in drivers/net/wireless/ath/ath10k/wmi-tlv.c in the Linux kernel. This issue could be exploited to trigger a denial of service. | ||||
| CVE-2023-6918 | 3 Fedoraproject, Libssh, Redhat | 3 Fedora, Libssh, Enterprise Linux | 2025-09-02 | 3.7 Low |
| A flaw was found in the libssh implements abstract layer for message digest (MD) operations implemented by different supported crypto backends. The return values from these were not properly checked, which could cause low-memory situations failures, NULL dereferences, crashes, or usage of the uninitialized memory as an input for the KDF. In this case, non-matching keys will result in decryption/integrity failures, terminating the connection. | ||||
| CVE-2023-6679 | 3 Fedoraproject, Linux, Redhat | 4 Fedora, Linux Kernel, Enterprise Linux and 1 more | 2025-09-02 | 5.5 Medium |
| A null pointer dereference vulnerability was found in dpll_pin_parent_pin_set() in drivers/dpll/dpll_netlink.c in the Digital Phase Locked Loop (DPLL) subsystem in the Linux kernel. This issue could be exploited to trigger a denial of service. | ||||
| CVE-2023-6228 | 2 Libtiff, Redhat | 2 Libtiff, Enterprise Linux | 2025-09-02 | 3.3 Low |
| An issue was found in the tiffcp utility distributed by the libtiff package where a crafted TIFF file on processing may cause a heap-based buffer overflow leads to an application crash. | ||||
| CVE-2023-6004 | 3 Fedoraproject, Libssh, Redhat | 3 Fedora, Libssh, Enterprise Linux | 2025-09-02 | 4.8 Medium |
| A flaw was found in libssh. By utilizing the ProxyCommand or ProxyJump feature, users can exploit unchecked hostname syntax on the client. This issue may allow an attacker to inject malicious code into the command of the features mentioned through the hostname parameter. | ||||
| CVE-2024-28182 | 4 Debian, Fedoraproject, Nghttp2 and 1 more | 9 Debian Linux, Fedora, Nghttp2 and 6 more | 2025-09-02 | 5.3 Medium |
| nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. The nghttp2 library prior to version 1.61.0 keeps reading the unbounded number of HTTP/2 CONTINUATION frames even after a stream is reset to keep HPACK context in sync. This causes excessive CPU usage to decode HPACK stream. nghttp2 v1.61.0 mitigates this vulnerability by limiting the number of CONTINUATION frames it accepts per stream. There is no workaround for this vulnerability. | ||||
| CVE-2023-5568 | 2 Redhat, Samba | 3 Enterprise Linux, Storage, Samba | 2025-09-02 | 5.9 Medium |
| A heap-based Buffer Overflow flaw was discovered in Samba. It could allow a remote, authenticated attacker to exploit this vulnerability to cause a denial of service. | ||||
| CVE-2023-4693 | 2 Gnu, Redhat | 2 Grub2, Enterprise Linux | 2025-09-02 | 5.3 Medium |
| An out-of-bounds read flaw was found on grub2's NTFS filesystem driver. This issue may allow a physically present attacker to present a specially crafted NTFS file system image to read arbitrary memory locations. A successful attack allows sensitive data cached in memory or EFI variable values to be leaked, presenting a high Confidentiality risk. | ||||
| CVE-2023-4692 | 2 Gnu, Redhat | 2 Grub2, Enterprise Linux | 2025-09-02 | 7.5 High |
| An out-of-bounds write flaw was found in grub2's NTFS filesystem driver. This issue may allow an attacker to present a specially crafted NTFS filesystem image, leading to grub's heap metadata corruption. In some circumstances, the attack may also corrupt the UEFI firmware heap metadata. As a result, arbitrary code execution and secure boot protection bypass may be achieved. | ||||
| CVE-2025-4373 | 1 Redhat | 8 Enterprise Linux, Insights Proxy, Openshift Distributed Tracing and 5 more | 2025-09-02 | 4.8 Medium |
| A flaw was found in GLib, which is vulnerable to an integer overflow in the g_string_insert_unichar() function. When the position at which to insert the character is large, the position will overflow, leading to a buffer underwrite. | ||||
| CVE-2024-5535 | 2 Openssl, Redhat | 7 Openssl, Enterprise Linux, Jboss Core Services and 4 more | 2025-09-01 | 9.1 Critical |
| Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a "no overlap" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available. | ||||
| CVE-2025-7345 | 1 Redhat | 7 Enterprise Linux, Rhel Aus, Rhel E4s and 4 more | 2025-08-31 | 7.5 High |
| A flaw exists in gdk‑pixbuf within the gdk_pixbuf__jpeg_image_load_increment function (io-jpeg.c) and in glib’s g_base64_encode_step (glib/gbase64.c). When processing maliciously crafted JPEG images, a heap buffer overflow can occur during Base64 encoding, allowing out-of-bounds reads from heap memory, potentially causing application crashes or arbitrary code execution. | ||||
| CVE-2024-0567 | 5 Debian, Fedoraproject, Gnu and 2 more | 9 Debian Linux, Fedora, Gnutls and 6 more | 2025-08-31 | 7.5 High |
| A vulnerability was found in GnuTLS, where a cockpit (which uses gnuTLS) rejects a certificate chain with distributed trust. This issue occurs when validating a certificate chain with cockpit-certificate-ensure. This flaw allows an unauthenticated, remote client or attacker to initiate a denial of service attack. | ||||
| CVE-2025-5278 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-08-30 | 4.4 Medium |
| A flaw was found in GNU Coreutils. The sort utility's begfield() function is vulnerable to a heap buffer under-read. The program may access memory outside the allocated buffer if a user runs a crafted command using the traditional key format. A malicious input could lead to a crash or leak sensitive data. | ||||
| CVE-2025-46400 | 1 Redhat | 1 Enterprise Linux | 2025-08-30 | 4.7 Medium |
| In xfig diagramming tool, a segmentation fault while running fig2dev allows an attacker to availability via local input manipulation via read_arcobject function. | ||||
| CVE-2025-46399 | 1 Redhat | 1 Enterprise Linux | 2025-08-30 | 4.7 Medium |
| A flaw was found in fig2dev. This vulnerability allows availability via local input manipulation via genge_itp_spline function. | ||||
| CVE-2025-46398 | 1 Redhat | 1 Enterprise Linux | 2025-08-30 | 4.7 Medium |
| In xfig diagramming tool, a stack-overflow while running fig2dev allows memory corruption via local input manipulation via read_objects function. | ||||
| CVE-2025-46397 | 1 Redhat | 1 Enterprise Linux | 2025-08-30 | 4.7 Medium |
| In xfig diagramming tool, a stack-overflow while running fig2dev allows memory corruption via local input manipulation at the bezier_spline function. | ||||