Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
16996 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53781 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smc: Fix use-after-free in tcp_write_timer_handler(). With Eric's ref tracker, syzbot finally found a repro for use-after-free in tcp_write_timer_handler() by kernel TCP sockets. [0] If SMC creates a kernel socket in __smc_create(), the kernel socket is supposed to be freed in smc_clcsock_release() by calling sock_release() when we close() the parent SMC socket. However, at the end of smc_clcsock_release(), the kernel socket's sk_state might not be TCP_CLOSE. This means that we have not called inet_csk_destroy_sock() in __tcp_close() and have not stopped the TCP timers. The kernel socket's TCP timers can be fired later, so we need to hold a refcnt for net as we do for MPTCP subflows in mptcp_subflow_create_socket(). [0]: leaked reference. sk_alloc (./include/net/net_namespace.h:335 net/core/sock.c:2108) inet_create (net/ipv4/af_inet.c:319 net/ipv4/af_inet.c:244) __sock_create (net/socket.c:1546) smc_create (net/smc/af_smc.c:3269 net/smc/af_smc.c:3284) __sock_create (net/socket.c:1546) __sys_socket (net/socket.c:1634 net/socket.c:1618 net/socket.c:1661) __x64_sys_socket (net/socket.c:1672) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) ================================================================== BUG: KASAN: slab-use-after-free in tcp_write_timer_handler (net/ipv4/tcp_timer.c:378 net/ipv4/tcp_timer.c:624 net/ipv4/tcp_timer.c:594) Read of size 1 at addr ffff888052b65e0d by task syzrepro/18091 CPU: 0 PID: 18091 Comm: syzrepro Tainted: G W 6.3.0-rc4-01174-gb5d54eb5899a #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:107) print_report (mm/kasan/report.c:320 mm/kasan/report.c:430) kasan_report (mm/kasan/report.c:538) tcp_write_timer_handler (net/ipv4/tcp_timer.c:378 net/ipv4/tcp_timer.c:624 net/ipv4/tcp_timer.c:594) tcp_write_timer (./include/linux/spinlock.h:390 net/ipv4/tcp_timer.c:643) call_timer_fn (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/timer.h:127 kernel/time/timer.c:1701) __run_timers.part.0 (kernel/time/timer.c:1752 kernel/time/timer.c:2022) run_timer_softirq (kernel/time/timer.c:2037) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572) __irq_exit_rcu (kernel/softirq.c:445 kernel/softirq.c:650) irq_exit_rcu (kernel/softirq.c:664) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1107 (discriminator 14)) </IRQ> | ||||
| CVE-2023-53778 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Clean up integer overflow checking in map_user_pages() The encode_dma() function has some validation on in_trans->size but it would be more clear to move those checks to find_and_map_user_pages(). The encode_dma() had two checks: if (in_trans->addr + in_trans->size < in_trans->addr || !in_trans->size) return -EINVAL; The in_trans->addr variable is the starting address. The in_trans->size variable is the total size of the transfer. The transfer can occur in parts and the resources->xferred_dma_size tracks how many bytes we have already transferred. This patch introduces a new variable "remaining" which represents the amount we want to transfer (in_trans->size) minus the amount we have already transferred (resources->xferred_dma_size). I have modified the check for if in_trans->size is zero to instead check if in_trans->size is less than resources->xferred_dma_size. If we have already transferred more bytes than in_trans->size then there are negative bytes remaining which doesn't make sense. If there are zero bytes remaining to be copied, just return success. The check in encode_dma() checked that "addr + size" could not overflow and barring a driver bug that should work, but it's easier to check if we do this in parts. First check that "in_trans->addr + resources->xferred_dma_size" is safe. Then check that "xfer_start_addr + remaining" is safe. My final concern was that we are dealing with u64 values but on 32bit systems the kmalloc() function will truncate the sizes to 32 bits. So I calculated "total = in_trans->size + offset_in_page(xfer_start_addr);" and returned -EINVAL if it were >= SIZE_MAX. This will not affect 64bit systems. | ||||
| CVE-2023-53777 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: kill hooked chains to avoid loops on deduplicated compressed images After heavily stressing EROFS with several images which include a hand-crafted image of repeated patterns for more than 46 days, I found two chains could be linked with each other almost simultaneously and form a loop so that the entire loop won't be submitted. As a consequence, the corresponding file pages will remain locked forever. It can be _only_ observed on data-deduplicated compressed images. For example, consider two chains with five pclusters in total: Chain 1: 2->3->4->5 -- The tail pcluster is 5; Chain 2: 5->1->2 -- The tail pcluster is 2. Chain 2 could link to Chain 1 with pcluster 5; and Chain 1 could link to Chain 2 at the same time with pcluster 2. Since hooked chains are all linked locklessly now, I have no idea how to simply avoid the race. Instead, let's avoid hooked chains completely until I could work out a proper way to fix this and end users finally tell us that it's needed to add it back. Actually, this optimization can be found with multi-threaded workloads (especially even more often on deduplicated compressed images), yet I'm not sure about the overall system impacts of not having this compared with implementation complexity. | ||||
| CVE-2022-50674 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: vdso: fix NULL deference in vdso_join_timens() when vfork Testing tools/testing/selftests/timens/vfork_exec.c got below kernel log: [ 6.838454] Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000000020 [ 6.842255] Oops [#1] [ 6.842871] Modules linked in: [ 6.844249] CPU: 1 PID: 64 Comm: vfork_exec Not tainted 6.0.0-rc3-rt15+ #8 [ 6.845861] Hardware name: riscv-virtio,qemu (DT) [ 6.848009] epc : vdso_join_timens+0xd2/0x110 [ 6.850097] ra : vdso_join_timens+0xd2/0x110 [ 6.851164] epc : ffffffff8000635c ra : ffffffff8000635c sp : ff6000000181fbf0 [ 6.852562] gp : ffffffff80cff648 tp : ff60000000fdb700 t0 : 3030303030303030 [ 6.853852] t1 : 0000000000000030 t2 : 3030303030303030 s0 : ff6000000181fc40 [ 6.854984] s1 : ff60000001e6c000 a0 : 0000000000000010 a1 : ffffffff8005654c [ 6.856221] a2 : 00000000ffffefff a3 : 0000000000000000 a4 : 0000000000000000 [ 6.858114] a5 : 0000000000000000 a6 : 0000000000000008 a7 : 0000000000000038 [ 6.859484] s2 : ff60000001e6c068 s3 : ff6000000108abb0 s4 : 0000000000000000 [ 6.860751] s5 : 0000000000001000 s6 : ffffffff8089dc40 s7 : ffffffff8089dc38 [ 6.862029] s8 : ffffffff8089dc30 s9 : ff60000000fdbe38 s10: 000000000000005e [ 6.863304] s11: ffffffff80cc3510 t3 : ffffffff80d1112f t4 : ffffffff80d1112f [ 6.864565] t5 : ffffffff80d11130 t6 : ff6000000181fa00 [ 6.865561] status: 0000000000000120 badaddr: 0000000000000020 cause: 000000000000000d [ 6.868046] [<ffffffff8008dc94>] timens_commit+0x38/0x11a [ 6.869089] [<ffffffff8008dde8>] timens_on_fork+0x72/0xb4 [ 6.870055] [<ffffffff80190096>] begin_new_exec+0x3c6/0x9f0 [ 6.871231] [<ffffffff801d826c>] load_elf_binary+0x628/0x1214 [ 6.872304] [<ffffffff8018ee7a>] bprm_execve+0x1f2/0x4e4 [ 6.873243] [<ffffffff8018f90c>] do_execveat_common+0x16e/0x1ee [ 6.874258] [<ffffffff8018f9c8>] sys_execve+0x3c/0x48 [ 6.875162] [<ffffffff80003556>] ret_from_syscall+0x0/0x2 [ 6.877484] ---[ end trace 0000000000000000 ]--- This is because the mm->context.vdso_info is NULL in vfork case. From another side, mm->context.vdso_info either points to vdso info for RV64 or vdso info for compat, there's no need to bloat riscv's mm_context_t, we can handle the difference when setup the additional page for vdso. | ||||
| CVE-2022-50676 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: rds: don't hold sock lock when cancelling work from rds_tcp_reset_callbacks() syzbot is reporting lockdep warning at rds_tcp_reset_callbacks() [1], for commit ac3615e7f3cffe2a ("RDS: TCP: Reduce code duplication in rds_tcp_reset_callbacks()") added cancel_delayed_work_sync() into a section protected by lock_sock() without realizing that rds_send_xmit() might call lock_sock(). We don't need to protect cancel_delayed_work_sync() using lock_sock(), for even if rds_{send,recv}_worker() re-queued this work while __flush_work() from cancel_delayed_work_sync() was waiting for this work to complete, retried rds_{send,recv}_worker() is no-op due to the absence of RDS_CONN_UP bit. | ||||
| CVE-2022-50679 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i40e: Fix DMA mappings leak During reallocation of RX buffers, new DMA mappings are created for those buffers. steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done done This resulted in crash: i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536 Driver BUG WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50 Call Trace: i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b Missing register, driver bug WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140 Call Trace: xdp_rxq_info_unreg+0x1e/0x50 i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b This was caused because of new buffers with different RX ring count should substitute older ones, but those buffers were freed in i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi, thus kfree on rx_bi caused leak of already mapped DMA. Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally reallocate back to rx_bi when BPF program unloads. If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XSP_SETUP_XSK_POOL handler. | ||||
| CVE-2022-50675 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: mte: Avoid setting PG_mte_tagged if no tags cleared or restored Prior to commit 69e3b846d8a7 ("arm64: mte: Sync tags for pages where PTE is untagged"), mte_sync_tags() was only called for pte_tagged() entries (those mapped with PROT_MTE). Therefore mte_sync_tags() could safely use test_and_set_bit(PG_mte_tagged, &page->flags) without inadvertently setting PG_mte_tagged on an untagged page. The above commit was required as guests may enable MTE without any control at the stage 2 mapping, nor a PROT_MTE mapping in the VMM. However, the side-effect was that any page with a PTE that looked like swap (or migration) was getting PG_mte_tagged set automatically. A subsequent page copy (e.g. migration) copied the tags to the destination page even if the tags were owned by KASAN. This issue was masked by the page_kasan_tag_reset() call introduced in commit e5b8d9218951 ("arm64: mte: reset the page tag in page->flags"). When this commit was reverted (20794545c146), KASAN started reporting access faults because the overriding tags in a page did not match the original page->flags (with CONFIG_KASAN_HW_TAGS=y): BUG: KASAN: invalid-access in copy_page+0x10/0xd0 arch/arm64/lib/copy_page.S:26 Read at addr f5ff000017f2e000 by task syz-executor.1/2218 Pointer tag: [f5], memory tag: [f2] Move the PG_mte_tagged bit setting from mte_sync_tags() to the actual place where tags are cleared (mte_sync_page_tags()) or restored (mte_restore_tags()). | ||||
| CVE-2023-53821 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6_vti: fix slab-use-after-free in decode_session6 When ipv6_vti device is set to the qdisc of the sfb type, the cb field of the sent skb may be modified during enqueuing. Then, slab-use-after-free may occur when ipv6_vti device sends IPv6 packets. The stack information is as follows: BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890 Read of size 1 at addr ffff88802e08edc2 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-next-20230707-00001-g84e2cad7f979 #410 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0xd9/0x150 print_address_description.constprop.0+0x2c/0x3c0 kasan_report+0x11d/0x130 decode_session6+0x103f/0x1890 __xfrm_decode_session+0x54/0xb0 vti6_tnl_xmit+0x3e6/0x1ee0 dev_hard_start_xmit+0x187/0x700 sch_direct_xmit+0x1a3/0xc30 __qdisc_run+0x510/0x17a0 __dev_queue_xmit+0x2215/0x3b10 neigh_connected_output+0x3c2/0x550 ip6_finish_output2+0x55a/0x1550 ip6_finish_output+0x6b9/0x1270 ip6_output+0x1f1/0x540 ndisc_send_skb+0xa63/0x1890 ndisc_send_rs+0x132/0x6f0 addrconf_rs_timer+0x3f1/0x870 call_timer_fn+0x1a0/0x580 expire_timers+0x29b/0x4b0 run_timer_softirq+0x326/0x910 __do_softirq+0x1d4/0x905 irq_exit_rcu+0xb7/0x120 sysvec_apic_timer_interrupt+0x97/0xc0 </IRQ> Allocated by task 9176: kasan_save_stack+0x22/0x40 kasan_set_track+0x25/0x30 __kasan_slab_alloc+0x7f/0x90 kmem_cache_alloc_node+0x1cd/0x410 kmalloc_reserve+0x165/0x270 __alloc_skb+0x129/0x330 netlink_sendmsg+0x9b1/0xe30 sock_sendmsg+0xde/0x190 ____sys_sendmsg+0x739/0x920 ___sys_sendmsg+0x110/0x1b0 __sys_sendmsg+0xf7/0x1c0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 9176: kasan_save_stack+0x22/0x40 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2b/0x40 ____kasan_slab_free+0x160/0x1c0 slab_free_freelist_hook+0x11b/0x220 kmem_cache_free+0xf0/0x490 skb_free_head+0x17f/0x1b0 skb_release_data+0x59c/0x850 consume_skb+0xd2/0x170 netlink_unicast+0x54f/0x7f0 netlink_sendmsg+0x926/0xe30 sock_sendmsg+0xde/0x190 ____sys_sendmsg+0x739/0x920 ___sys_sendmsg+0x110/0x1b0 __sys_sendmsg+0xf7/0x1c0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd The buggy address belongs to the object at ffff88802e08ed00 which belongs to the cache skbuff_small_head of size 640 The buggy address is located 194 bytes inside of freed 640-byte region [ffff88802e08ed00, ffff88802e08ef80) As commit f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.") showed, xfrm_decode_session was originally intended only for the receive path. IP6CB(skb)->nhoff is not set during transmission. Therefore, set the cb field in the skb to 0 before sending packets. | ||||
| CVE-2023-53826 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ubi: Fix UAF wear-leveling entry in eraseblk_count_seq_show() Wear-leveling entry could be freed in error path, which may be accessed again in eraseblk_count_seq_show(), for example: __erase_worker eraseblk_count_seq_show wl = ubi->lookuptbl[*block_number] if (wl) wl_entry_destroy ubi->lookuptbl[e->pnum] = NULL kmem_cache_free(ubi_wl_entry_slab, e) erase_count = wl->ec // UAF! Wear-leveling entry updating/accessing in ubi->lookuptbl should be protected by ubi->wl_lock, fix it by adding ubi->wl_lock to serialize wl entry accessing between wl_entry_destroy() and eraseblk_count_seq_show(). Fetch a reproducer in [Link]. | ||||
| CVE-2023-53828 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_add_adv_monitor() KSAN reports use-after-free in hci_add_adv_monitor(). While adding an adv monitor, hci_add_adv_monitor() calls -> msft_add_monitor_pattern() calls -> msft_add_monitor_sync() calls -> msft_le_monitor_advertisement_cb() calls in an error case -> hci_free_adv_monitor() which frees the *moniter. This is referenced by bt_dev_dbg() in hci_add_adv_monitor(). Fix the bt_dev_dbg() by using handle instead of monitor->handle. | ||||
| CVE-2022-50658 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom: fix memory leak in error path If for some reason the speedbin length is incorrect, then there is a memory leak in the error path because we never free the speedbin buffer. This commit fixes the error path to always free the speedbin buffer. | ||||
| CVE-2023-53847 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb-storage: alauda: Fix uninit-value in alauda_check_media() Syzbot got KMSAN to complain about access to an uninitialized value in the alauda subdriver of usb-storage: BUG: KMSAN: uninit-value in alauda_transport+0x462/0x57f0 drivers/usb/storage/alauda.c:1137 CPU: 0 PID: 12279 Comm: usb-storage Not tainted 5.3.0-rc7+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x13a/0x2b0 mm/kmsan/kmsan_report.c:108 __msan_warning+0x73/0xe0 mm/kmsan/kmsan_instr.c:250 alauda_check_media+0x344/0x3310 drivers/usb/storage/alauda.c:460 The problem is that alauda_check_media() doesn't verify that its USB transfer succeeded before trying to use the received data. What should happen if the transfer fails isn't entirely clear, but a reasonably conservative approach is to pretend that no media is present. A similar problem exists in a usb_stor_dbg() call in alauda_get_media_status(). In this case, when an error occurs the call is redundant, because usb_stor_ctrl_transfer() already will print a debugging message. Finally, unrelated to the uninitialized memory access, is the fact that alauda_check_media() performs DMA to a buffer on the stack. Fortunately usb-storage provides a general purpose DMA-able buffer for uses like this. We'll use it instead. | ||||
| CVE-2022-50671 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix "kernel NULL pointer dereference" error When rxe_queue_init in the function rxe_qp_init_req fails, both qp->req.task.func and qp->req.task.arg are not initialized. Because of creation of qp fails, the function rxe_create_qp will call rxe_qp_do_cleanup to handle allocated resource. Before calling __rxe_do_task, both qp->req.task.func and qp->req.task.arg should be checked. | ||||
| CVE-2023-53819 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: amdgpu: validate offset_in_bo of drm_amdgpu_gem_va This is motivated by OOB access in amdgpu_vm_update_range when offset_in_bo+map_size overflows. v2: keep the validations in amdgpu_vm_bo_map v3: add the validations to amdgpu_vm_bo_map/amdgpu_vm_bo_replace_map rather than to amdgpu_gem_va_ioctl | ||||
| CVE-2022-50663 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix possible memory leak in stmmac_dvr_probe() The bitmap_free() should be called to free priv->af_xdp_zc_qps when create_singlethread_workqueue() fails, otherwise there will be a memory leak, so we add the err path error_wq_init to fix it. | ||||
| CVE-2022-50662 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: fix memory leak in hns_roce_alloc_mr() When hns_roce_mr_enable() failed in hns_roce_alloc_mr(), mr_key is not released. Compiled test only. | ||||
| CVE-2022-50660 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ipw2200: fix memory leak in ipw_wdev_init() In the error path of ipw_wdev_init(), exception value is returned, and the memory applied for in the function is not released. Also the memory is not released in ipw_pci_probe(). As a result, memory leakage occurs. So memory release needs to be added to the error path of ipw_wdev_init(). | ||||
| CVE-2022-50659 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: geode - Fix PCI device refcount leak for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. We add a new struct 'amd_geode_priv' to record pointer of the pci_dev and membase, and then add missing pci_dev_put() for the normal and error path. | ||||
| CVE-2023-53830 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: think-lmi: Fix memory leak when showing current settings When retriving a item string with tlmi_setting(), the result has to be freed using kfree(). In current_value_show() however, malformed item strings are not freed, causing a memory leak. Fix this by eliminating the early return responsible for this. | ||||
| CVE-2022-50657 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: mm: add missing memcpy in kasan_init Hi Atish, It seems that the panic is due to the missing memcpy during kasan_init. Could you please check whether this patch is helpful? When doing kasan_populate, the new allocated base_pud/base_p4d should contain kasan_early_shadow_{pud, p4d}'s content. Add the missing memcpy to avoid page fault when read/write kasan shadow region. Tested on: - qemu with sv57 and CONFIG_KASAN on. - qemu with sv48 and CONFIG_KASAN on. | ||||