Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
16996 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53811 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Cap MSIX used to online CPUs + 1 The irdma driver can use a maximum number of msix vectors equal to num_online_cpus() + 1 and the kernel warning stack below is shown if that number is exceeded. The kernel throws a warning as the driver tries to update the affinity hint with a CPU mask greater than the max CPU IDs. Fix this by capping the MSIX vectors to num_online_cpus() + 1. WARNING: CPU: 7 PID: 23655 at include/linux/cpumask.h:106 irdma_cfg_ceq_vector+0x34c/0x3f0 [irdma] RIP: 0010:irdma_cfg_ceq_vector+0x34c/0x3f0 [irdma] Call Trace: irdma_rt_init_hw+0xa62/0x1290 [irdma] ? irdma_alloc_local_mac_entry+0x1a0/0x1a0 [irdma] ? __is_kernel_percpu_address+0x63/0x310 ? rcu_read_lock_held_common+0xe/0xb0 ? irdma_lan_unregister_qset+0x280/0x280 [irdma] ? irdma_request_reset+0x80/0x80 [irdma] ? ice_get_qos_params+0x84/0x390 [ice] irdma_probe+0xa40/0xfc0 [irdma] ? rcu_read_lock_bh_held+0xd0/0xd0 ? irdma_remove+0x140/0x140 [irdma] ? rcu_read_lock_sched_held+0x62/0xe0 ? down_write+0x187/0x3d0 ? auxiliary_match_id+0xf0/0x1a0 ? irdma_remove+0x140/0x140 [irdma] auxiliary_bus_probe+0xa6/0x100 __driver_probe_device+0x4a4/0xd50 ? __device_attach_driver+0x2c0/0x2c0 driver_probe_device+0x4a/0x110 __driver_attach+0x1aa/0x350 bus_for_each_dev+0x11d/0x1b0 ? subsys_dev_iter_init+0xe0/0xe0 bus_add_driver+0x3b1/0x610 driver_register+0x18e/0x410 ? 0xffffffffc0b88000 irdma_init_module+0x50/0xaa [irdma] do_one_initcall+0x103/0x5f0 ? perf_trace_initcall_level+0x420/0x420 ? do_init_module+0x4e/0x700 ? __kasan_kmalloc+0x7d/0xa0 ? kmem_cache_alloc_trace+0x188/0x2b0 ? kasan_unpoison+0x21/0x50 do_init_module+0x1d1/0x700 load_module+0x3867/0x5260 ? layout_and_allocate+0x3990/0x3990 ? rcu_read_lock_held_common+0xe/0xb0 ? rcu_read_lock_sched_held+0x62/0xe0 ? rcu_read_lock_bh_held+0xd0/0xd0 ? __vmalloc_node_range+0x46b/0x890 ? lock_release+0x5c8/0xba0 ? alloc_vm_area+0x120/0x120 ? selinux_kernel_module_from_file+0x2a5/0x300 ? __inode_security_revalidate+0xf0/0xf0 ? __do_sys_init_module+0x1db/0x260 __do_sys_init_module+0x1db/0x260 ? load_module+0x5260/0x5260 ? do_syscall_64+0x22/0x450 do_syscall_64+0xa5/0x450 entry_SYSCALL_64_after_hwframe+0x66/0xdb | ||||
| CVE-2023-53810 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: release crypto keyslot before reporting I/O complete Once all I/O using a blk_crypto_key has completed, filesystems can call blk_crypto_evict_key(). However, the block layer currently doesn't call blk_crypto_put_keyslot() until the request is being freed, which happens after upper layers have been told (via bio_endio()) the I/O has completed. This causes a race condition where blk_crypto_evict_key() can see 'slot_refs != 0' without there being an actual bug. This makes __blk_crypto_evict_key() hit the 'WARN_ON_ONCE(atomic_read(&slot->slot_refs) != 0)' and return without doing anything, eventually causing a use-after-free in blk_crypto_reprogram_all_keys(). (This is a very rare bug and has only been seen when per-file keys are being used with fscrypt.) There are two options to fix this: either release the keyslot before bio_endio() is called on the request's last bio, or make __blk_crypto_evict_key() ignore slot_refs. Let's go with the first solution, since it preserves the ability to report bugs (via WARN_ON_ONCE) where a key is evicted while still in-use. | ||||
| CVE-2023-53809 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: Avoid possible recursive deadlock in l2tp_tunnel_register() When a file descriptor of pppol2tp socket is passed as file descriptor of UDP socket, a recursive deadlock occurs in l2tp_tunnel_register(). This situation is reproduced by the following program: int main(void) { int sock; struct sockaddr_pppol2tp addr; sock = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP); if (sock < 0) { perror("socket"); return 1; } addr.sa_family = AF_PPPOX; addr.sa_protocol = PX_PROTO_OL2TP; addr.pppol2tp.pid = 0; addr.pppol2tp.fd = sock; addr.pppol2tp.addr.sin_family = PF_INET; addr.pppol2tp.addr.sin_port = htons(0); addr.pppol2tp.addr.sin_addr.s_addr = inet_addr("192.168.0.1"); addr.pppol2tp.s_tunnel = 1; addr.pppol2tp.s_session = 0; addr.pppol2tp.d_tunnel = 0; addr.pppol2tp.d_session = 0; if (connect(sock, (const struct sockaddr *)&addr, sizeof(addr)) < 0) { perror("connect"); return 1; } return 0; } This program causes the following lockdep warning: ============================================ WARNING: possible recursive locking detected 6.2.0-rc5-00205-gc96618275234 #56 Not tainted -------------------------------------------- repro/8607 is trying to acquire lock: ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: l2tp_tunnel_register+0x2b7/0x11c0 but task is already holding lock: ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: pppol2tp_connect+0xa82/0x1a30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sk_lock-AF_PPPOX); lock(sk_lock-AF_PPPOX); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by repro/8607: #0: ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: pppol2tp_connect+0xa82/0x1a30 stack backtrace: CPU: 0 PID: 8607 Comm: repro Not tainted 6.2.0-rc5-00205-gc96618275234 #56 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x100/0x178 __lock_acquire.cold+0x119/0x3b9 ? lockdep_hardirqs_on_prepare+0x410/0x410 lock_acquire+0x1e0/0x610 ? l2tp_tunnel_register+0x2b7/0x11c0 ? lock_downgrade+0x710/0x710 ? __fget_files+0x283/0x3e0 lock_sock_nested+0x3a/0xf0 ? l2tp_tunnel_register+0x2b7/0x11c0 l2tp_tunnel_register+0x2b7/0x11c0 ? sprintf+0xc4/0x100 ? l2tp_tunnel_del_work+0x6b0/0x6b0 ? debug_object_deactivate+0x320/0x320 ? lockdep_init_map_type+0x16d/0x7a0 ? lockdep_init_map_type+0x16d/0x7a0 ? l2tp_tunnel_create+0x2bf/0x4b0 ? l2tp_tunnel_create+0x3c6/0x4b0 pppol2tp_connect+0x14e1/0x1a30 ? pppol2tp_put_sk+0xd0/0xd0 ? aa_sk_perm+0x2b7/0xa80 ? aa_af_perm+0x260/0x260 ? bpf_lsm_socket_connect+0x9/0x10 ? pppol2tp_put_sk+0xd0/0xd0 __sys_connect_file+0x14f/0x190 __sys_connect+0x133/0x160 ? __sys_connect_file+0x190/0x190 ? lockdep_hardirqs_on+0x7d/0x100 ? ktime_get_coarse_real_ts64+0x1b7/0x200 ? ktime_get_coarse_real_ts64+0x147/0x200 ? __audit_syscall_entry+0x396/0x500 __x64_sys_connect+0x72/0xb0 do_syscall_64+0x38/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd This patch fixes the issue by getting/creating the tunnel before locking the pppol2tp socket. | ||||
| CVE-2022-50667 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix memory leak in vmw_mksstat_add_ioctl() If the copy of the description string from userspace fails, then the page for the instance descriptor doesn't get freed before returning -EFAULT, which leads to a memleak. | ||||
| CVE-2022-50668 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix deadlock due to mbcache entry corruption When manipulating xattr blocks, we can deadlock infinitely looping inside ext4_xattr_block_set() where we constantly keep finding xattr block for reuse in mbcache but we are unable to reuse it because its reference count is too big. This happens because cache entry for the xattr block is marked as reusable (e_reusable set) although its reference count is too big. When this inconsistency happens, this inconsistent state is kept indefinitely and so ext4_xattr_block_set() keeps retrying indefinitely. The inconsistent state is caused by non-atomic update of e_reusable bit. e_reusable is part of a bitfield and e_reusable update can race with update of e_referenced bit in the same bitfield resulting in loss of one of the updates. Fix the problem by using atomic bitops instead. This bug has been around for many years, but it became *much* easier to hit after commit 65f8b80053a1 ("ext4: fix race when reusing xattr blocks"). | ||||
| CVE-2023-53808 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix memory leak in mwifiex_histogram_read() Always free the zeroed page on return from 'mwifiex_histogram_read()'. | ||||
| CVE-2023-53807 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clk: clocking-wizard: Fix Oops in clk_wzrd_register_divider() Smatch detected this potential error pointer dereference clk_wzrd_register_divider(). If devm_clk_hw_register() fails then it sets "hw" to an error pointer and then dereferences it on the next line. Return the error directly instead. | ||||
| CVE-2022-50669 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: misc: ocxl: fix possible name leak in ocxl_file_register_afu() If device_register() returns error in ocxl_file_register_afu(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(), and info is freed in info_release(). | ||||
| CVE-2022-50670 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: omap_hsmmc: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del(). Fix this by checking the return value and goto error path wihch will call mmc_free_host(). | ||||
| CVE-2022-50672 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: zynq-ipi: fix error handling while device_register() fails If device_register() fails, it has two issues: 1. The name allocated by dev_set_name() is leaked. 2. The parent of device is not NULL, device_unregister() is called in zynqmp_ipi_free_mboxes(), it will lead a kernel crash because of removing not added device. Call put_device() to give up the reference, so the name is freed in kobject_cleanup(). Add device registered check in zynqmp_ipi_free_mboxes() to avoid null-ptr-deref. | ||||
| CVE-2023-53802 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback function It is stated that ath9k_htc_rx_msg() either frees the provided skb or passes its management to another callback function. However, the skb is not freed in case there is no another callback function, and Syzkaller was able to cause a memory leak. Also minor comment fix. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2023-53800 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ubi: Fix use-after-free when volume resizing failed There is an use-after-free problem reported by KASAN: ================================================================== BUG: KASAN: use-after-free in ubi_eba_copy_table+0x11f/0x1c0 [ubi] Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735 CPU: 2 PID: 4735 Comm: ubirsvol Not tainted 6.1.0-rc1-00003-g84fa3304a7fc-dirty #14 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report+0x171/0x472 kasan_report+0xad/0x130 ubi_eba_copy_table+0x11f/0x1c0 [ubi] ubi_resize_volume+0x4f9/0xbc0 [ubi] ubi_cdev_ioctl+0x701/0x1850 [ubi] __x64_sys_ioctl+0x11d/0x170 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> When ubi_change_vtbl_record() returns an error in ubi_resize_volume(), "new_eba_tbl" will be freed on error handing path, but it is holded by "vol->eba_tbl" in ubi_eba_replace_table(). It means that the liftcycle of "vol->eba_tbl" and "vol" are different, so when resizing volume in next time, it causing an use-after-free fault. Fix it by not freeing "new_eba_tbl" after it replaced in ubi_eba_replace_table(), while will be freed in next volume resizing. | ||||
| CVE-2023-53798 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: Fix uninitialized number of lanes It is not possible to set the number of lanes when setting link modes using the legacy IOCTL ethtool interface. Since 'struct ethtool_link_ksettings' is not initialized in this path, drivers receive an uninitialized number of lanes in 'struct ethtool_link_ksettings::lanes'. When this information is later queried from drivers, it results in the ethtool code making decisions based on uninitialized memory, leading to the following KMSAN splat [1]. In practice, this most likely only happens with the tun driver that simply returns whatever it got in the set operation. As far as I can tell, this uninitialized memory is not leaked to user space thanks to the 'ethtool_ops->cap_link_lanes_supported' check in linkmodes_prepare_data(). Fix by initializing the structure in the IOCTL path. Did not find any more call sites that pass an uninitialized structure when calling 'ethtool_ops::set_link_ksettings()'. [1] BUG: KMSAN: uninit-value in ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline] BUG: KMSAN: uninit-value in ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333 ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline] ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333 ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640 genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065 netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmsg net/socket.c:2584 [inline] __do_sys_sendmsg net/socket.c:2593 [inline] __se_sys_sendmsg net/socket.c:2591 [inline] __x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was stored to memory at: tun_get_link_ksettings+0x37/0x60 drivers/net/tun.c:3544 __ethtool_get_link_ksettings+0x17b/0x260 net/ethtool/ioctl.c:441 ethnl_set_linkmodes+0xee/0x19d0 net/ethtool/linkmodes.c:327 ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640 genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065 netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmsg net/socket.c:2584 [inline] __do_sys_sendmsg net/socket.c:2593 [inline] __se_sys_sendmsg net/socket.c:2591 [inline] __x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was stored to memory at: tun_set_link_ksettings+0x37/0x60 drivers/net/tun.c:3553 ethtool_set_link_ksettings+0x600/0x690 net/ethtool/ioctl.c:609 __dev_ethtool net/ethtool/ioctl.c:3024 [inline] dev_ethtool+0x1db9/0x2a70 net/ethtool/ioctl.c:3078 dev_ioctl+0xb07/0x1270 net/core/dev_ioctl.c:524 sock_do_ioctl+0x295/0x540 net/socket.c:1213 sock_i ---truncated--- | ||||
| CVE-2023-53797 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Use ktime_t rather than int when dealing with timestamps Code which interacts with timestamps needs to use the ktime_t type returned by functions like ktime_get. The int type does not offer enough space to store these values, and attempting to use it is a recipe for problems. In this particular case, overflows would occur when calculating/storing timestamps leading to incorrect values being reported to userspace. In some cases these bad timestamps cause input handling in userspace to appear hung. | ||||
| CVE-2023-53796 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix information leak in f2fs_move_inline_dirents() When converting an inline directory to a regular one, f2fs is leaking uninitialized memory to disk because it doesn't initialize the entire directory block. Fix this by zero-initializing the block. This bug was introduced by commit 4ec17d688d74 ("f2fs: avoid unneeded initializing when converting inline dentry"), which didn't consider the security implications of leaking uninitialized memory to disk. This was found by running xfstest generic/435 on a KMSAN-enabled kernel. | ||||
| CVE-2023-53791 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: md: fix warning for holder mismatch from export_rdev() Commit a1d767191096 ("md: use mddev->external to select holder in export_rdev()") fix the problem that 'claim_rdev' is used for blkdev_get_by_dev() while 'rdev' is used for blkdev_put(). However, if mddev->external is changed from 0 to 1, then 'rdev' is used for blkdev_get_by_dev() while 'claim_rdev' is used for blkdev_put(). And this problem can be reporduced reliably by following: New file: mdadm/tests/23rdev-lifetime devname=${dev0##*/} devt=`cat /sys/block/$devname/dev` pid="" runtime=2 clean_up_test() { pill -9 $pid echo clear > /sys/block/md0/md/array_state } trap 'clean_up_test' EXIT add_by_sysfs() { while true; do echo $devt > /sys/block/md0/md/new_dev done } remove_by_sysfs(){ while true; do echo remove > /sys/block/md0/md/dev-${devname}/state done } echo md0 > /sys/module/md_mod/parameters/new_array || die "create md0 failed" add_by_sysfs & pid="$pid $!" remove_by_sysfs & pid="$pid $!" sleep $runtime exit 0 Test cmd: ./test --save-logs --logdir=/tmp/ --keep-going --dev=loop --tests=23rdev-lifetime Test result: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 960 at block/bdev.c:618 blkdev_put+0x27c/0x330 Modules linked in: multipath md_mod loop CPU: 0 PID: 960 Comm: test Not tainted 6.5.0-rc2-00121-g01e55c376936-dirty #50 RIP: 0010:blkdev_put+0x27c/0x330 Call Trace: <TASK> export_rdev.isra.23+0x50/0xa0 [md_mod] mddev_unlock+0x19d/0x300 [md_mod] rdev_attr_store+0xec/0x190 [md_mod] sysfs_kf_write+0x52/0x70 kernfs_fop_write_iter+0x19a/0x2a0 vfs_write+0x3b5/0x770 ksys_write+0x74/0x150 __x64_sys_write+0x22/0x30 do_syscall_64+0x40/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fix the problem by recording if 'rdev' is used as holder. | ||||
| CVE-2023-53790 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Zeroing allocated object from slab in bpf memory allocator Currently the freed element in bpf memory allocator may be immediately reused, for htab map the reuse will reinitialize special fields in map value (e.g., bpf_spin_lock), but lookup procedure may still access these special fields, and it may lead to hard-lockup as shown below: NMI backtrace for cpu 16 CPU: 16 PID: 2574 Comm: htab.bin Tainted: G L 6.1.0+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), RIP: 0010:queued_spin_lock_slowpath+0x283/0x2c0 ...... Call Trace: <TASK> copy_map_value_locked+0xb7/0x170 bpf_map_copy_value+0x113/0x3c0 __sys_bpf+0x1c67/0x2780 __x64_sys_bpf+0x1c/0x20 do_syscall_64+0x30/0x60 entry_SYSCALL_64_after_hwframe+0x46/0xb0 ...... </TASK> For htab map, just like the preallocated case, these is no need to initialize these special fields in map value again once these fields have been initialized. For preallocated htab map, these fields are initialized through __GFP_ZERO in bpf_map_area_alloc(), so do the similar thing for non-preallocated htab in bpf memory allocator. And there is no need to use __GFP_ZERO for per-cpu bpf memory allocator, because __alloc_percpu_gfp() does it implicitly. | ||||
| CVE-2023-53787 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: da9063: fix null pointer deref with partial DT config When some of the da9063 regulators do not have corresponding DT nodes a null pointer dereference occurs on boot because such regulators have no init_data causing the pointers calculated in da9063_check_xvp_constraints() to be invalid. Do not dereference them in this case. | ||||
| CVE-2023-53784 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm: bridge: dw_hdmi: fix connector access for scdc Commit 5d844091f237 ("drm/scdc-helper: Pimp SCDC debugs") changed the scdc interface to pick up an i2c adapter from a connector instead. However, in the case of dw-hdmi, the wrong connector was being used to pass i2c adapter information, since dw-hdmi's embedded connector structure is only populated when the bridge attachment callback explicitly asks for it. drm-meson is handling connector creation, so this won't happen, leading to a NULL pointer dereference. Fix it by having scdc functions access dw-hdmi's current connector pointer instead, which is assigned during the bridge enablement stage. [narmstrong: moved Fixes tag before first S-o-b and added Reported-by tag] | ||||
| CVE-2023-53782 | 1 Linux | 1 Linux Kernel | 2025-12-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dccp: Fix out of bounds access in DCCP error handler There was a previous attempt to fix an out-of-bounds access in the DCCP error handlers, but that fix assumed that the error handlers only want to access the first 8 bytes of the DCCP header. Actually, they also look at the DCCP sequence number, which is stored beyond 8 bytes, so an explicit pskb_may_pull() is required. | ||||