Filtered by vendor Redhat
Subscriptions
Total
22914 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50035 | 1 Redhat | 1 Enterprise Linux | 2025-06-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix use-after-free on amdgpu_bo_list mutex If amdgpu_cs_vm_handling returns r != 0, then it will unlock the bo_list_mutex inside the function amdgpu_cs_vm_handling and again on amdgpu_cs_parser_fini. This problem results in the following use-after-free problem: [ 220.280990] ------------[ cut here ]------------ [ 220.281000] refcount_t: underflow; use-after-free. [ 220.281019] WARNING: CPU: 1 PID: 3746 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 [ 220.281029] ------------[ cut here ]------------ [ 220.281415] CPU: 1 PID: 3746 Comm: chrome:cs0 Tainted: G W L ------- --- 5.20.0-0.rc0.20220812git7ebfc85e2cd7.10.fc38.x86_64 #1 [ 220.281421] Hardware name: System manufacturer System Product Name/ROG STRIX X570-I GAMING, BIOS 4403 04/27/2022 [ 220.281426] RIP: 0010:refcount_warn_saturate+0xba/0x110 [ 220.281431] Code: 01 01 e8 79 4a 6f 00 0f 0b e9 42 47 a5 00 80 3d de 7e be 01 00 75 85 48 c7 c7 f8 98 8e 98 c6 05 ce 7e be 01 01 e8 56 4a 6f 00 <0f> 0b e9 1f 47 a5 00 80 3d b9 7e be 01 00 0f 85 5e ff ff ff 48 c7 [ 220.281437] RSP: 0018:ffffb4b0d18d7a80 EFLAGS: 00010282 [ 220.281443] RAX: 0000000000000026 RBX: 0000000000000003 RCX: 0000000000000000 [ 220.281448] RDX: 0000000000000001 RSI: ffffffff988d06dc RDI: 00000000ffffffff [ 220.281452] RBP: 00000000ffffffff R08: 0000000000000000 R09: ffffb4b0d18d7930 [ 220.281457] R10: 0000000000000003 R11: ffffa0672e2fffe8 R12: ffffa058ca360400 [ 220.281461] R13: ffffa05846c50a18 R14: 00000000fffffe00 R15: 0000000000000003 [ 220.281465] FS: 00007f82683e06c0(0000) GS:ffffa066e2e00000(0000) knlGS:0000000000000000 [ 220.281470] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 220.281475] CR2: 00003590005cc000 CR3: 00000001fca46000 CR4: 0000000000350ee0 [ 220.281480] Call Trace: [ 220.281485] <TASK> [ 220.281490] amdgpu_cs_ioctl+0x4e2/0x2070 [amdgpu] [ 220.281806] ? amdgpu_cs_find_mapping+0xe0/0xe0 [amdgpu] [ 220.282028] drm_ioctl_kernel+0xa4/0x150 [ 220.282043] drm_ioctl+0x21f/0x420 [ 220.282053] ? amdgpu_cs_find_mapping+0xe0/0xe0 [amdgpu] [ 220.282275] ? lock_release+0x14f/0x460 [ 220.282282] ? _raw_spin_unlock_irqrestore+0x30/0x60 [ 220.282290] ? _raw_spin_unlock_irqrestore+0x30/0x60 [ 220.282297] ? lockdep_hardirqs_on+0x7d/0x100 [ 220.282305] ? _raw_spin_unlock_irqrestore+0x40/0x60 [ 220.282317] amdgpu_drm_ioctl+0x4a/0x80 [amdgpu] [ 220.282534] __x64_sys_ioctl+0x90/0xd0 [ 220.282545] do_syscall_64+0x5b/0x80 [ 220.282551] ? futex_wake+0x6c/0x150 [ 220.282568] ? lock_is_held_type+0xe8/0x140 [ 220.282580] ? do_syscall_64+0x67/0x80 [ 220.282585] ? lockdep_hardirqs_on+0x7d/0x100 [ 220.282592] ? do_syscall_64+0x67/0x80 [ 220.282597] ? do_syscall_64+0x67/0x80 [ 220.282602] ? lockdep_hardirqs_on+0x7d/0x100 [ 220.282609] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 220.282616] RIP: 0033:0x7f8282a4f8bf [ 220.282639] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00 00 [ 220.282644] RSP: 002b:00007f82683df410 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 220.282651] RAX: ffffffffffffffda RBX: 00007f82683df588 RCX: 00007f8282a4f8bf [ 220.282655] RDX: 00007f82683df4d0 RSI: 00000000c0186444 RDI: 0000000000000018 [ 220.282659] RBP: 00007f82683df4d0 R08: 00007f82683df5e0 R09: 00007f82683df4b0 [ 220.282663] R10: 00001d04000a0600 R11: 0000000000000246 R12: 00000000c0186444 [ 220.282667] R13: 0000000000000018 R14: 00007f82683df588 R15: 0000000000000003 [ 220.282689] </TASK> [ 220.282693] irq event stamp: 6232311 [ 220.282697] hardirqs last enabled at (6232319): [<ffffffff9718cd7e>] __up_console_sem+0x5e/0x70 [ 220.282704] hardirqs last disabled at (6232326): [<ffffffff9718cd63>] __up_console_sem+0x43/0x70 [ 220.282709] softirqs last enabled at (6232072): [<ffffffff970ff669>] __irq_exit_rcu+0xf9/0x170 [ 220.282716] softirqs last disabled at (6232061): [<ffffffff97 ---truncated--- | ||||
| CVE-2022-50069 | 1 Redhat | 1 Enterprise Linux | 2025-06-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: BPF: Fix potential bad pointer dereference in bpf_sys_bpf() The bpf_sys_bpf() helper function allows an eBPF program to load another eBPF program from within the kernel. In this case the argument union bpf_attr pointer (as well as the insns and license pointers inside) is a kernel address instead of a userspace address (which is the case of a usual bpf() syscall). To make the memory copying process in the syscall work in both cases, bpfptr_t was introduced to wrap around the pointer and distinguish its origin. Specifically, when copying memory contents from a bpfptr_t, a copy_from_user() is performed in case of a userspace address and a memcpy() is performed for a kernel address. This can lead to problems because the in-kernel pointer is never checked for validity. The problem happens when an eBPF syscall program tries to call bpf_sys_bpf() to load a program but provides a bad insns pointer -- say 0xdeadbeef -- in the bpf_attr union. The helper calls __sys_bpf() which would then call bpf_prog_load() to load the program. bpf_prog_load() is responsible for copying the eBPF instructions to the newly allocated memory for the program; it creates a kernel bpfptr_t for insns and invokes copy_from_bpfptr(). Internally, all bpfptr_t operations are backed by the corresponding sockptr_t operations, which performs direct memcpy() on kernel pointers for copy_from/strncpy_from operations. Therefore, the code is always happy to dereference the bad pointer to trigger a un-handle-able page fault and in turn an oops. However, this is not supposed to happen because at that point the eBPF program is already verified and should not cause a memory error. Sample KASAN trace: [ 25.685056][ T228] ================================================================== [ 25.685680][ T228] BUG: KASAN: user-memory-access in copy_from_bpfptr+0x21/0x30 [ 25.686210][ T228] Read of size 80 at addr 00000000deadbeef by task poc/228 [ 25.686732][ T228] [ 25.686893][ T228] CPU: 3 PID: 228 Comm: poc Not tainted 5.19.0-rc7 #7 [ 25.687375][ T228] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS d55cb5a 04/01/2014 [ 25.687991][ T228] Call Trace: [ 25.688223][ T228] <TASK> [ 25.688429][ T228] dump_stack_lvl+0x73/0x9e [ 25.688747][ T228] print_report+0xea/0x200 [ 25.689061][ T228] ? copy_from_bpfptr+0x21/0x30 [ 25.689401][ T228] ? _printk+0x54/0x6e [ 25.689693][ T228] ? _raw_spin_lock_irqsave+0x70/0xd0 [ 25.690071][ T228] ? copy_from_bpfptr+0x21/0x30 [ 25.690412][ T228] kasan_report+0xb5/0xe0 [ 25.690716][ T228] ? copy_from_bpfptr+0x21/0x30 [ 25.691059][ T228] kasan_check_range+0x2bd/0x2e0 [ 25.691405][ T228] ? copy_from_bpfptr+0x21/0x30 [ 25.691734][ T228] memcpy+0x25/0x60 [ 25.692000][ T228] copy_from_bpfptr+0x21/0x30 [ 25.692328][ T228] bpf_prog_load+0x604/0x9e0 [ 25.692653][ T228] ? cap_capable+0xb4/0xe0 [ 25.692956][ T228] ? security_capable+0x4f/0x70 [ 25.693324][ T228] __sys_bpf+0x3af/0x580 [ 25.693635][ T228] bpf_sys_bpf+0x45/0x240 [ 25.693937][ T228] bpf_prog_f0ec79a5a3caca46_bpf_func1+0xa2/0xbd [ 25.694394][ T228] bpf_prog_run_pin_on_cpu+0x2f/0xb0 [ 25.694756][ T228] bpf_prog_test_run_syscall+0x146/0x1c0 [ 25.695144][ T228] bpf_prog_test_run+0x172/0x190 [ 25.695487][ T228] __sys_bpf+0x2c5/0x580 [ 25.695776][ T228] __x64_sys_bpf+0x3a/0x50 [ 25.696084][ T228] do_syscall_64+0x60/0x90 [ 25.696393][ T228] ? fpregs_assert_state_consistent+0x50/0x60 [ 25.696815][ T228] ? exit_to_user_mode_prepare+0x36/0xa0 [ 25.697202][ T228] ? syscall_exit_to_user_mode+0x20/0x40 [ 25.697586][ T228] ? do_syscall_64+0x6e/0x90 [ 25.697899][ T228] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 25.698312][ T228] RIP: 0033:0x7f6d543fb759 [ 25.698624][ T228] Code: 08 5b 89 e8 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d ---truncated--- | ||||
| CVE-2022-50088 | 1 Redhat | 1 Enterprise Linux | 2025-06-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/reclaim: fix potential memory leak in damon_reclaim_init() damon_reclaim_init() allocates a memory chunk for ctx with damon_new_ctx(). When damon_select_ops() fails, ctx is not released, which will lead to a memory leak. We should release the ctx with damon_destroy_ctx() when damon_select_ops() fails to fix the memory leak. | ||||
| CVE-2022-50029 | 1 Redhat | 1 Enterprise Linux | 2025-06-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: clk: qcom: ipq8074: dont disable gcc_sleep_clk_src Once the usb sleep clocks are disabled, clock framework is trying to disable the sleep clock source also. However, it seems that it cannot be disabled and trying to do so produces: [ 245.436390] ------------[ cut here ]------------ [ 245.441233] gcc_sleep_clk_src status stuck at 'on' [ 245.441254] WARNING: CPU: 2 PID: 223 at clk_branch_wait+0x130/0x140 [ 245.450435] Modules linked in: xhci_plat_hcd xhci_hcd dwc3 dwc3_qcom leds_gpio [ 245.456601] CPU: 2 PID: 223 Comm: sh Not tainted 5.18.0-rc4 #215 [ 245.463889] Hardware name: Xiaomi AX9000 (DT) [ 245.470050] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 245.474307] pc : clk_branch_wait+0x130/0x140 [ 245.481073] lr : clk_branch_wait+0x130/0x140 [ 245.485588] sp : ffffffc009f2bad0 [ 245.489838] x29: ffffffc009f2bad0 x28: ffffff8003e6c800 x27: 0000000000000000 [ 245.493057] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800226ef20 [ 245.500175] x23: ffffffc0089ff550 x22: 0000000000000000 x21: ffffffc008476ad0 [ 245.507294] x20: 0000000000000000 x19: ffffffc00965ac70 x18: fffffffffffc51a7 [ 245.514413] x17: 68702e3030303837 x16: 3a6d726f6674616c x15: ffffffc089f2b777 [ 245.521531] x14: ffffffc0095c9d18 x13: 0000000000000129 x12: 0000000000000129 [ 245.528649] x11: 00000000ffffffea x10: ffffffc009621d18 x9 : 0000000000000001 [ 245.535767] x8 : 0000000000000001 x7 : 0000000000017fe8 x6 : 0000000000000001 [ 245.542885] x5 : ffffff803fdca6d8 x4 : 0000000000000000 x3 : 0000000000000027 [ 245.550002] x2 : 0000000000000027 x1 : 0000000000000023 x0 : 0000000000000026 [ 245.557122] Call trace: [ 245.564229] clk_branch_wait+0x130/0x140 [ 245.566490] clk_branch2_disable+0x2c/0x40 [ 245.570656] clk_core_disable+0x60/0xb0 [ 245.574561] clk_core_disable+0x68/0xb0 [ 245.578293] clk_disable+0x30/0x50 [ 245.582113] dwc3_qcom_remove+0x60/0xc0 [dwc3_qcom] [ 245.585588] platform_remove+0x28/0x60 [ 245.590361] device_remove+0x4c/0x80 [ 245.594179] device_release_driver_internal+0x1dc/0x230 [ 245.597914] device_driver_detach+0x18/0x30 [ 245.602861] unbind_store+0xec/0x110 [ 245.607027] drv_attr_store+0x24/0x40 [ 245.610847] sysfs_kf_write+0x44/0x60 [ 245.614405] kernfs_fop_write_iter+0x128/0x1c0 [ 245.618052] new_sync_write+0xc0/0x130 [ 245.622391] vfs_write+0x1d4/0x2a0 [ 245.626123] ksys_write+0x58/0xe0 [ 245.629508] __arm64_sys_write+0x1c/0x30 [ 245.632895] invoke_syscall.constprop.0+0x5c/0x110 [ 245.636890] do_el0_svc+0xa0/0x150 [ 245.641488] el0_svc+0x18/0x60 [ 245.644872] el0t_64_sync_handler+0xa4/0x130 [ 245.647914] el0t_64_sync+0x174/0x178 [ 245.652340] ---[ end trace 0000000000000000 ]--- So, add CLK_IS_CRITICAL flag to the clock so that the kernel won't try to disable the sleep clock. | ||||
| CVE-2022-49940 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2025-06-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: add sanity check for gsm->receive in gsm_receive_buf() A null pointer dereference can happen when attempting to access the "gsm->receive()" function in gsmld_receive_buf(). Currently, the code assumes that gsm->recieve is only called after MUX activation. Since the gsmld_receive_buf() function can be accessed without the need to initialize the MUX, the gsm->receive() function will not be set and a NULL pointer dereference will occur. Fix this by avoiding the call to "gsm->receive()" in case the function is not initialized by adding a sanity check. Call Trace: <TASK> gsmld_receive_buf+0x1c2/0x2f0 drivers/tty/n_gsm.c:2861 tiocsti drivers/tty/tty_io.c:2293 [inline] tty_ioctl+0xa75/0x15d0 drivers/tty/tty_io.c:2692 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd | ||||
| CVE-2022-49951 | 1 Redhat | 1 Enterprise Linux | 2025-06-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix use-after-free during unregister In the following code within firmware_upload_unregister(), the call to device_unregister() could result in the dev_release function freeing the fw_upload_priv structure before it is dereferenced for the call to module_put(). This bug was found by the kernel test robot using CONFIG_KASAN while running the firmware selftests. device_unregister(&fw_sysfs->dev); module_put(fw_upload_priv->module); The problem is fixed by copying fw_upload_priv->module to a local variable for use when calling device_unregister(). | ||||
| CVE-2022-49960 | 1 Redhat | 1 Enterprise Linux | 2025-06-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: fix null pointer dereference Asus chromebook CX550 crashes during boot on v5.17-rc1 kernel. The root cause is null pointer defeference of bi_next in tgl_get_bw_info() in drivers/gpu/drm/i915/display/intel_bw.c. BUG: kernel NULL pointer dereference, address: 000000000000002e PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 1 Comm: swapper/0 Tainted: G U 5.17.0-rc1 Hardware name: Google Delbin/Delbin, BIOS Google_Delbin.13672.156.3 05/14/2021 RIP: 0010:tgl_get_bw_info+0x2de/0x510 ... [ 2.554467] Call Trace: [ 2.554467] <TASK> [ 2.554467] intel_bw_init_hw+0x14a/0x434 [ 2.554467] ? _printk+0x59/0x73 [ 2.554467] ? _dev_err+0x77/0x91 [ 2.554467] i915_driver_hw_probe+0x329/0x33e [ 2.554467] i915_driver_probe+0x4c8/0x638 [ 2.554467] i915_pci_probe+0xf8/0x14e [ 2.554467] ? _raw_spin_unlock_irqrestore+0x12/0x2c [ 2.554467] pci_device_probe+0xaa/0x142 [ 2.554467] really_probe+0x13f/0x2f4 [ 2.554467] __driver_probe_device+0x9e/0xd3 [ 2.554467] driver_probe_device+0x24/0x7c [ 2.554467] __driver_attach+0xba/0xcf [ 2.554467] ? driver_attach+0x1f/0x1f [ 2.554467] bus_for_each_dev+0x8c/0xc0 [ 2.554467] bus_add_driver+0x11b/0x1f7 [ 2.554467] driver_register+0x60/0xea [ 2.554467] ? mipi_dsi_bus_init+0x16/0x16 [ 2.554467] i915_init+0x2c/0xb9 [ 2.554467] ? mipi_dsi_bus_init+0x16/0x16 [ 2.554467] do_one_initcall+0x12e/0x2b3 [ 2.554467] do_initcall_level+0xd6/0xf3 [ 2.554467] do_initcalls+0x4e/0x79 [ 2.554467] kernel_init_freeable+0xed/0x14d [ 2.554467] ? rest_init+0xc1/0xc1 [ 2.554467] kernel_init+0x1a/0x120 [ 2.554467] ret_from_fork+0x1f/0x30 [ 2.554467] </TASK> ... Kernel panic - not syncing: Fatal exception (cherry picked from commit c247cd03898c4c43c3bce6d4014730403bc13032) | ||||
| CVE-2022-49977 | 1 Redhat | 1 Enterprise Linux | 2025-06-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead ftrace_startup does not remove ops from ftrace_ops_list when ftrace_startup_enable fails: register_ftrace_function ftrace_startup __register_ftrace_function ... add_ftrace_ops(&ftrace_ops_list, ops) ... ... ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1 ... return 0 // ops is in the ftrace_ops_list. When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything: unregister_ftrace_function ftrace_shutdown if (unlikely(ftrace_disabled)) return -ENODEV; // return here, __unregister_ftrace_function is not executed, // as a result, ops is still in the ftrace_ops_list __unregister_ftrace_function ... If ops is dynamically allocated, it will be free later, in this case, is_ftrace_trampoline accesses NULL pointer: is_ftrace_trampoline ftrace_ops_trampoline do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL! Syzkaller reports as follows: [ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b [ 1203.508039] #PF: supervisor read access in kernel mode [ 1203.508798] #PF: error_code(0x0000) - not-present page [ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0 [ 1203.510560] Oops: 0000 [#1] SMP KASAN PTI [ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G B W 5.10.0 #8 [ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0 [ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00 [ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246 [ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866 [ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b [ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07 [ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399 [ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008 [ 1203.525634] FS: 00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000 [ 1203.526801] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0 [ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Therefore, when ftrace_startup_enable fails, we need to rollback registration process and remove ops from ftrace_ops_list. | ||||
| CVE-2022-49991 | 1 Redhat | 1 Enterprise Linux | 2025-06-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte In MCOPY_ATOMIC_CONTINUE case with a non-shared VMA, pages in the page cache are installed in the ptes. But hugepage_add_new_anon_rmap is called for them mistakenly because they're not vm_shared. This will corrupt the page->mapping used by page cache code. | ||||
| CVE-2022-49998 | 1 Redhat | 1 Enterprise Linux | 2025-06-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix locking in rxrpc's sendmsg Fix three bugs in the rxrpc's sendmsg implementation: (1) rxrpc_new_client_call() should release the socket lock when returning an error from rxrpc_get_call_slot(). (2) rxrpc_wait_for_tx_window_intr() will return without the call mutex held in the event that we're interrupted by a signal whilst waiting for tx space on the socket or relocking the call mutex afterwards. Fix this by: (a) moving the unlock/lock of the call mutex up to rxrpc_send_data() such that the lock is not held around all of rxrpc_wait_for_tx_window*() and (b) indicating to higher callers whether we're return with the lock dropped. Note that this means recvmsg() will not block on this call whilst we're waiting. (3) After dropping and regaining the call mutex, rxrpc_send_data() needs to go and recheck the state of the tx_pending buffer and the tx_total_len check in case we raced with another sendmsg() on the same call. Thinking on this some more, it might make sense to have different locks for sendmsg() and recvmsg(). There's probably no need to make recvmsg() wait for sendmsg(). It does mean that recvmsg() can return MSG_EOR indicating that a call is dead before a sendmsg() to that call returns - but that can currently happen anyway. Without fix (2), something like the following can be induced: WARNING: bad unlock balance detected! 5.16.0-rc6-syzkaller #0 Not tainted ------------------------------------- syz-executor011/3597 is trying to release lock (&call->user_mutex) at: [<ffffffff885163a3>] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 but there are no more locks to release! other info that might help us debug this: no locks held by syz-executor011/3597. ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline] __lock_release kernel/locking/lockdep.c:5306 [inline] lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657 __mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900 rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae [Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this] | ||||
| CVE-2022-50000 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2025-06-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: fix stuck flows on cleanup due to pending work To clear the flow table on flow table free, the following sequence normally happens in order: 1) gc_step work is stopped to disable any further stats/del requests. 2) All flow table entries are set to teardown state. 3) Run gc_step which will queue HW del work for each flow table entry. 4) Waiting for the above del work to finish (flush). 5) Run gc_step again, deleting all entries from the flow table. 6) Flow table is freed. But if a flow table entry already has pending HW stats or HW add work step 3 will not queue HW del work (it will be skipped), step 4 will wait for the pending add/stats to finish, and step 5 will queue HW del work which might execute after freeing of the flow table. To fix the above, this patch flushes the pending work, then it sets the teardown flag to all flows in the flowtable and it forces a garbage collector run to queue work to remove the flows from hardware, then it flushes this new pending work and (finally) it forces another garbage collector run to remove the entry from the software flowtable. Stack trace: [47773.882335] BUG: KASAN: use-after-free in down_read+0x99/0x460 [47773.883634] Write of size 8 at addr ffff888103b45aa8 by task kworker/u20:6/543704 [47773.885634] CPU: 3 PID: 543704 Comm: kworker/u20:6 Not tainted 5.12.0-rc7+ #2 [47773.886745] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) [47773.888438] Workqueue: nf_ft_offload_del flow_offload_work_handler [nf_flow_table] [47773.889727] Call Trace: [47773.890214] dump_stack+0xbb/0x107 [47773.890818] print_address_description.constprop.0+0x18/0x140 [47773.892990] kasan_report.cold+0x7c/0xd8 [47773.894459] kasan_check_range+0x145/0x1a0 [47773.895174] down_read+0x99/0x460 [47773.899706] nf_flow_offload_tuple+0x24f/0x3c0 [nf_flow_table] [47773.907137] flow_offload_work_handler+0x72d/0xbe0 [nf_flow_table] [47773.913372] process_one_work+0x8ac/0x14e0 [47773.921325] [47773.921325] Allocated by task 592159: [47773.922031] kasan_save_stack+0x1b/0x40 [47773.922730] __kasan_kmalloc+0x7a/0x90 [47773.923411] tcf_ct_flow_table_get+0x3cb/0x1230 [act_ct] [47773.924363] tcf_ct_init+0x71c/0x1156 [act_ct] [47773.925207] tcf_action_init_1+0x45b/0x700 [47773.925987] tcf_action_init+0x453/0x6b0 [47773.926692] tcf_exts_validate+0x3d0/0x600 [47773.927419] fl_change+0x757/0x4a51 [cls_flower] [47773.928227] tc_new_tfilter+0x89a/0x2070 [47773.936652] [47773.936652] Freed by task 543704: [47773.937303] kasan_save_stack+0x1b/0x40 [47773.938039] kasan_set_track+0x1c/0x30 [47773.938731] kasan_set_free_info+0x20/0x30 [47773.939467] __kasan_slab_free+0xe7/0x120 [47773.940194] slab_free_freelist_hook+0x86/0x190 [47773.941038] kfree+0xce/0x3a0 [47773.941644] tcf_ct_flow_table_cleanup_work Original patch description and stack trace by Paul Blakey. | ||||
| CVE-2022-50020 | 1 Redhat | 1 Enterprise Linux | 2025-06-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid resizing to a partial cluster size This patch avoids an attempt to resize the filesystem to an unaligned cluster boundary. An online resize to a size that is not integral to cluster size results in the last iteration attempting to grow the fs by a negative amount, which trips a BUG_ON and leaves the fs with a corrupted in-memory superblock. | ||||
| CVE-2022-49961 | 1 Redhat | 1 Enterprise Linux | 2025-06-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Do mark_chain_precision for ARG_CONST_ALLOC_SIZE_OR_ZERO Precision markers need to be propagated whenever we have an ARG_CONST_* style argument, as the verifier cannot consider imprecise scalars to be equivalent for the purposes of states_equal check when such arguments refine the return value (in this case, set mem_size for PTR_TO_MEM). The resultant mem_size for the R0 is derived from the constant value, and if the verifier incorrectly prunes states considering them equivalent where such arguments exist (by seeing that both registers have reg->precise as false in regsafe), we can end up with invalid programs passing the verifier which can do access beyond what should have been the correct mem_size in that explored state. To show a concrete example of the problem: 0000000000000000 <prog>: 0: r2 = *(u32 *)(r1 + 80) 1: r1 = *(u32 *)(r1 + 76) 2: r3 = r1 3: r3 += 4 4: if r3 > r2 goto +18 <LBB5_5> 5: w2 = 0 6: *(u32 *)(r1 + 0) = r2 7: r1 = *(u32 *)(r1 + 0) 8: r2 = 1 9: if w1 == 0 goto +1 <LBB5_3> 10: r2 = -1 0000000000000058 <LBB5_3>: 11: r1 = 0 ll 13: r3 = 0 14: call bpf_ringbuf_reserve 15: if r0 == 0 goto +7 <LBB5_5> 16: r1 = r0 17: r1 += 16777215 18: w2 = 0 19: *(u8 *)(r1 + 0) = r2 20: r1 = r0 21: r2 = 0 22: call bpf_ringbuf_submit 00000000000000b8 <LBB5_5>: 23: w0 = 0 24: exit For the first case, the single line execution's exploration will prune the search at insn 14 for the branch insn 9's second leg as it will be verified first using r2 = -1 (UINT_MAX), while as w1 at insn 9 will always be 0 so at runtime we don't get error for being greater than UINT_MAX/4 from bpf_ringbuf_reserve. The verifier during regsafe just sees reg->precise as false for both r2 registers in both states, hence considers them equal for purposes of states_equal. If we propagated precise markers using the backtracking support, we would use the precise marking to then ensure that old r2 (UINT_MAX) was within the new r2 (1) and this would never be true, so the verification would rightfully fail. The end result is that the out of bounds access at instruction 19 would be permitted without this fix. Note that reg->precise is always set to true when user does not have CAP_BPF (or when subprog count is greater than 1 (i.e. use of any static or global functions)), hence this is only a problem when precision marks need to be explicitly propagated (i.e. privileged users with CAP_BPF). A simplified test case has been included in the next patch to prevent future regressions. | ||||
| CVE-2025-2830 | 2 Mozilla, Redhat | 6 Thunderbird, Enterprise Linux, Rhel Aus and 3 more | 2025-06-18 | 6.3 Medium |
| By crafting a malformed file name for an attachment in a multipart message, an attacker can trick Thunderbird into including a directory listing of /tmp when the message is forwarded or edited as a new message. This vulnerability could allow attackers to disclose sensitive information from the victim's system. This vulnerability is not limited to Linux; similar behavior has been observed on Windows as well. This vulnerability affects Thunderbird < 137.0.2 and Thunderbird < 128.9.2. | ||||
| CVE-2025-3522 | 2 Mozilla, Redhat | 6 Thunderbird, Enterprise Linux, Rhel Aus and 3 more | 2025-06-18 | 6.3 Medium |
| Thunderbird processes the X-Mozilla-External-Attachment-URL header to handle attachments which can be hosted externally. When an email is opened, Thunderbird accesses the specified URL to determine file size, and navigates to it when the user clicks the attachment. Because the URL is not validated or sanitized, it can reference internal resources like chrome:// or SMB share file:// links, potentially leading to hashed Windows credential leakage and opening the door to more serious security issues. This vulnerability affects Thunderbird < 137.0.2 and Thunderbird < 128.9.2. | ||||
| CVE-2024-38808 | 3 Netapp, Redhat, Vmware | 5 Active Iq Unified Manager, Oncommand Insight, Apache Camel Spring Boot and 2 more | 2025-06-18 | 4.3 Medium |
| In Spring Framework versions 5.3.0 - 5.3.38 and older unsupported versions, it is possible for a user to provide a specially crafted Spring Expression Language (SpEL) expression that may cause a denial of service (DoS) condition. Specifically, an application is vulnerable when the following is true: * The application evaluates user-supplied SpEL expressions. | ||||
| CVE-2024-21140 | 3 Netapp, Oracle, Redhat | 19 Active Iq Unified Manager, Bluexp, Bootstrap Os and 16 more | 2025-06-18 | 4.8 Medium |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Hotspot). Supported versions that are affected are Oracle Java SE: 8u411, 8u411-perf, 11.0.23, 17.0.11, 21.0.3, 22.0.1; Oracle GraalVM for JDK: 17.0.11, 21.0.3, 22.0.1; Oracle GraalVM Enterprise Edition: 20.3.14 and 21.3.10. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data as well as unauthorized read access to a subset of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 4.8 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N). | ||||
| CVE-2022-1471 | 2 Redhat, Snakeyaml Project | 14 Amq Clients, Amq Streams, Enterprise Linux and 11 more | 2025-06-18 | 8.3 High |
| SnakeYaml's Constructor() class does not restrict types which can be instantiated during deserialization. Deserializing yaml content provided by an attacker can lead to remote code execution. We recommend using SnakeYaml's SafeConsturctor when parsing untrusted content to restrict deserialization. We recommend upgrading to version 2.0 and beyond. | ||||
| CVE-2025-3887 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2025-06-17 | 8.8 High |
| GStreamer H265 Codec Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of H265 slice headers. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-26596. | ||||
| CVE-2023-50782 | 3 Couchbase, Cryptography.io, Redhat | 7 Couchbase Server, Cryptography, Ansible Automation Platform and 4 more | 2025-06-17 | 7.5 High |
| A flaw was found in the python-cryptography package. This issue may allow a remote attacker to decrypt captured messages in TLS servers that use RSA key exchanges, which may lead to exposure of confidential or sensitive data. | ||||