Filtered by vendor Redhat
Subscriptions
Total
22914 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-10295 | 1 Redhat | 2 3scale Api Management, Red Hat 3scale Amp | 2025-06-18 | 7.5 High |
| A flaw was found in Gateway. Sending a non-base64 'basic' auth with special characters can cause APICast to incorrectly authenticate a request. A malformed basic authentication header containing special characters bypasses authentication and allows unauthorized access to the backend. This issue can occur due to a failure in the base64 decoding process, which causes APICast to skip the rest of the authentication checks and proceed with routing the request upstream. | ||||
| CVE-2024-12397 | 1 Redhat | 13 Amq Streams, Apache Camel Hawtio, Build Keycloak and 10 more | 2025-06-18 | 7.4 High |
| A flaw was found in Quarkus-HTTP, which incorrectly parses cookies with certain value-delimiting characters in incoming requests. This issue could allow an attacker to construct a cookie value to exfiltrate HttpOnly cookie values or spoof arbitrary additional cookie values, leading to unauthorized data access or modification. The main threat from this flaw impacts data confidentiality and integrity. | ||||
| CVE-2024-2700 | 1 Redhat | 11 Amq Streams, Apache Camel Hawtio, Apicurio Registry and 8 more | 2025-06-18 | 7 High |
| A vulnerability was found in the quarkus-core component. Quarkus captures local environment variables from the Quarkus namespace during the application's build, therefore, running the resulting application inherits the values captured at build time. Some local environment variables may have been set by the developer or CI environment for testing purposes, such as dropping the database during application startup or trusting all TLS certificates to accept self-signed certificates. If these properties are configured using environment variables or the .env facility, they are captured into the built application, which can lead to dangerous behavior if the application does not override these values. This behavior only happens for configuration properties from the `quarkus.*` namespace. Application-specific properties are not captured. | ||||
| CVE-2024-12088 | 8 Almalinux, Archlinux, Gentoo and 5 more | 21 Almalinux, Arch Linux, Linux and 18 more | 2025-06-18 | 6.5 Medium |
| A flaw was found in rsync. When using the `--safe-links` option, the rsync client fails to properly verify if a symbolic link destination sent from the server contains another symbolic link within it. This results in a path traversal vulnerability, which may lead to arbitrary file write outside the desired directory. | ||||
| CVE-2023-0386 | 5 Canonical, Debian, Linux and 2 more | 16 Ubuntu Linux, Debian Linux, Linux Kernel and 13 more | 2025-06-18 | 7.8 High |
| A flaw was found in the Linux kernel, where unauthorized access to the execution of the setuid file with capabilities was found in the Linux kernel’s OverlayFS subsystem in how a user copies a capable file from a nosuid mount into another mount. This uid mapping bug allows a local user to escalate their privileges on the system. | ||||
| CVE-2024-33599 | 4 Debian, Gnu, Netapp and 1 more | 20 Debian Linux, Glibc, H300s and 17 more | 2025-06-18 | 8.1 High |
| nscd: Stack-based buffer overflow in netgroup cache If the Name Service Cache Daemon's (nscd) fixed size cache is exhausted by client requests then a subsequent client request for netgroup data may result in a stack-based buffer overflow. This flaw was introduced in glibc 2.15 when the cache was added to nscd. This vulnerability is only present in the nscd binary. | ||||
| CVE-2024-33600 | 4 Debian, Gnu, Netapp and 1 more | 27 Debian Linux, Glibc, Active Iq Unified Manager and 24 more | 2025-06-18 | 5.9 Medium |
| nscd: Null pointer crashes after notfound response If the Name Service Cache Daemon's (nscd) cache fails to add a not-found netgroup response to the cache, the client request can result in a null pointer dereference. This flaw was introduced in glibc 2.15 when the cache was added to nscd. This vulnerability is only present in the nscd binary. | ||||
| CVE-2024-33601 | 4 Debian, Gnu, Netapp and 1 more | 25 Debian Linux, Glibc, H300s and 22 more | 2025-06-18 | 7.3 High |
| nscd: netgroup cache may terminate daemon on memory allocation failure The Name Service Cache Daemon's (nscd) netgroup cache uses xmalloc or xrealloc and these functions may terminate the process due to a memory allocation failure resulting in a denial of service to the clients. The flaw was introduced in glibc 2.15 when the cache was added to nscd. This vulnerability is only present in the nscd binary. | ||||
| CVE-2023-36479 | 3 Debian, Eclipse, Redhat | 7 Debian Linux, Jetty, Jboss Fuse and 4 more | 2025-06-18 | 3.5 Low |
| Eclipse Jetty Canonical Repository is the canonical repository for the Jetty project. Users of the CgiServlet with a very specific command structure may have the wrong command executed. If a user sends a request to a org.eclipse.jetty.servlets.CGI Servlet for a binary with a space in its name, the servlet will escape the command by wrapping it in quotation marks. This wrapped command, plus an optional command prefix, will then be executed through a call to Runtime.exec. If the original binary name provided by the user contains a quotation mark followed by a space, the resulting command line will contain multiple tokens instead of one. This issue was patched in version 9.4.52, 10.0.16, 11.0.16 and 12.0.0-beta2. | ||||
| CVE-2024-33602 | 4 Debian, Gnu, Netapp and 1 more | 23 Debian Linux, Glibc, Element Software and 20 more | 2025-06-18 | 7.4 High |
| nscd: netgroup cache assumes NSS callback uses in-buffer strings The Name Service Cache Daemon's (nscd) netgroup cache can corrupt memory when the NSS callback does not store all strings in the provided buffer. The flaw was introduced in glibc 2.15 when the cache was added to nscd. This vulnerability is only present in the nscd binary. | ||||
| CVE-2024-34397 | 5 Debian, Fedoraproject, Gnome and 2 more | 6 Debian Linux, Fedora, Glib and 3 more | 2025-06-18 | 5.2 Medium |
| An issue was discovered in GNOME GLib before 2.78.5, and 2.79.x and 2.80.x before 2.80.1. When a GDBus-based client subscribes to signals from a trusted system service such as NetworkManager on a shared computer, other users of the same computer can send spoofed D-Bus signals that the GDBus-based client will wrongly interpret as having been sent by the trusted system service. This could lead to the GDBus-based client behaving incorrectly, with an application-dependent impact. | ||||
| CVE-2023-4065 | 1 Redhat | 6 Amq Broker, Enterprise Linux, Jboss A-mq and 3 more | 2025-06-18 | 5.5 Medium |
| A flaw was found in Red Hat AMQ Broker Operator, where it displayed a password defined in ActiveMQArtemisAddress CR, shown in plain text in the Operator Log. This flaw allows an authenticated local attacker to access information outside of their permissions. | ||||
| CVE-2023-5157 | 3 Fedoraproject, Mariadb, Redhat | 17 Fedora, Mariadb, Enterprise Linux and 14 more | 2025-06-18 | 7.5 High |
| A vulnerability was found in MariaDB. An OpenVAS port scan on ports 3306 and 4567 allows a malicious remote client to cause a denial of service. | ||||
| CVE-2022-50117 | 1 Redhat | 1 Enterprise Linux | 2025-06-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vfio: Split migration ops from main device ops vfio core checks whether the driver sets some migration op (e.g. set_state/get_state) and accordingly calls its op. However, currently mlx5 driver sets the above ops without regards to its migration caps. This might lead to unexpected usage/Oops if user space may call to the above ops even if the driver doesn't support migration. As for example, the migration state_mutex is not initialized in that case. The cleanest way to manage that seems to split the migration ops from the main device ops, this will let the driver setting them separately from the main ops when it's applicable. As part of that, validate ops construction on registration and include a check for VFIO_MIGRATION_STOP_COPY since the uAPI claims it must be set in migration_flags. HISI driver was changed as well to match this scheme. This scheme may enable down the road to come with some extra group of ops (e.g. DMA log) that can be set without regards to the other options based on driver caps. | ||||
| CVE-2022-50044 | 1 Redhat | 1 Enterprise Linux | 2025-06-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: start MHI channel after endpoit creation MHI channel may generates event/interrupt right after enabling. It may leads to 2 race conditions issues. 1) Such event may be dropped by qcom_mhi_qrtr_dl_callback() at check: if (!qdev || mhi_res->transaction_status) return; Because dev_set_drvdata(&mhi_dev->dev, qdev) may be not performed at this moment. In this situation qrtr-ns will be unable to enumerate services in device. --------------------------------------------------------------- 2) Such event may come at the moment after dev_set_drvdata() and before qrtr_endpoint_register(). In this case kernel will panic with accessing wrong pointer at qcom_mhi_qrtr_dl_callback(): rc = qrtr_endpoint_post(&qdev->ep, mhi_res->buf_addr, mhi_res->bytes_xferd); Because endpoint is not created yet. -------------------------------------------------------------- So move mhi_prepare_for_transfer_autoqueue after endpoint creation to fix it. | ||||
| CVE-2022-50178 | 1 Redhat | 1 Enterprise Linux | 2025-06-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: 8852a: rfk: fix div 0 exception The DPK is a kind of RF calibration whose algorithm is to fine tune parameters and calibrate, and check the result. If the result isn't good enough, it could adjust parameters and try again. This issue is to read and show the result, but it could be a negative calibration result that causes divisor 0 and core dump. So, fix it by phy_div() that does division only if divisor isn't zero; otherwise, zero is adopted. divide error: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 728 Comm: wpa_supplicant Not tainted 5.10.114-16019-g462a1661811a #1 <HASH:d024 28> RIP: 0010:rtw8852a_dpk+0x14ae/0x288f [rtw89_core] RSP: 0018:ffffa9bb412a7520 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 00000000000180fc RDI: ffffa141d01023c0 RBP: ffffa9bb412a76a0 R08: 0000000000001319 R09: 00000000ffffff92 R10: ffffffffc0292de3 R11: ffffffffc00d2f51 R12: 0000000000000000 R13: ffffa141d01023c0 R14: ffffffffc0290250 R15: ffffa141d0102638 FS: 00007fa99f5c2740(0000) GS:ffffa142e5e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000013e8e010 CR3: 0000000110d2c000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: rtw89_core_sta_add+0x95/0x9c [rtw89_core <HASH:d239 29>] rtw89_ops_sta_state+0x5d/0x108 [rtw89_core <HASH:d239 29>] drv_sta_state+0x115/0x66f [mac80211 <HASH:81fe 30>] sta_info_insert_rcu+0x45c/0x713 [mac80211 <HASH:81fe 30>] sta_info_insert+0xf/0x1b [mac80211 <HASH:81fe 30>] ieee80211_prep_connection+0x9d6/0xb0c [mac80211 <HASH:81fe 30>] ieee80211_mgd_auth+0x2aa/0x352 [mac80211 <HASH:81fe 30>] cfg80211_mlme_auth+0x160/0x1f6 [cfg80211 <HASH:00cd 31>] nl80211_authenticate+0x2e5/0x306 [cfg80211 <HASH:00cd 31>] genl_rcv_msg+0x371/0x3a1 ? nl80211_stop_sched_scan+0xe5/0xe5 [cfg80211 <HASH:00cd 31>] ? genl_rcv+0x36/0x36 netlink_rcv_skb+0x8a/0xf9 genl_rcv+0x28/0x36 netlink_unicast+0x27b/0x3a0 netlink_sendmsg+0x2aa/0x469 sock_sendmsg_nosec+0x49/0x4d ____sys_sendmsg+0xe5/0x213 __sys_sendmsg+0xec/0x157 ? syscall_enter_from_user_mode+0xd7/0x116 do_syscall_64+0x43/0x55 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fa99f6e689b | ||||
| CVE-2022-50066 | 1 Redhat | 4 Enterprise Linux, Rhel Aus, Rhel E4s and 1 more | 2025-06-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: atlantic: fix aq_vec index out of range error The final update statement of the for loop exceeds the array range, the dereference of self->aq_vec[i] is not checked and then leads to the index out of range error. Also fixed this kind of coding style in other for loop. [ 97.937604] UBSAN: array-index-out-of-bounds in drivers/net/ethernet/aquantia/atlantic/aq_nic.c:1404:48 [ 97.937607] index 8 is out of range for type 'aq_vec_s *[8]' [ 97.937608] CPU: 38 PID: 3767 Comm: kworker/u256:18 Not tainted 5.19.0+ #2 [ 97.937610] Hardware name: Dell Inc. Precision 7865 Tower/, BIOS 1.0.0 06/12/2022 [ 97.937611] Workqueue: events_unbound async_run_entry_fn [ 97.937616] Call Trace: [ 97.937617] <TASK> [ 97.937619] dump_stack_lvl+0x49/0x63 [ 97.937624] dump_stack+0x10/0x16 [ 97.937626] ubsan_epilogue+0x9/0x3f [ 97.937627] __ubsan_handle_out_of_bounds.cold+0x44/0x49 [ 97.937629] ? __scm_send+0x348/0x440 [ 97.937632] ? aq_vec_stop+0x72/0x80 [atlantic] [ 97.937639] aq_nic_stop+0x1b6/0x1c0 [atlantic] [ 97.937644] aq_suspend_common+0x88/0x90 [atlantic] [ 97.937648] aq_pm_suspend_poweroff+0xe/0x20 [atlantic] [ 97.937653] pci_pm_suspend+0x7e/0x1a0 [ 97.937655] ? pci_pm_suspend_noirq+0x2b0/0x2b0 [ 97.937657] dpm_run_callback+0x54/0x190 [ 97.937660] __device_suspend+0x14c/0x4d0 [ 97.937661] async_suspend+0x23/0x70 [ 97.937663] async_run_entry_fn+0x33/0x120 [ 97.937664] process_one_work+0x21f/0x3f0 [ 97.937666] worker_thread+0x4a/0x3c0 [ 97.937668] ? process_one_work+0x3f0/0x3f0 [ 97.937669] kthread+0xf0/0x120 [ 97.937671] ? kthread_complete_and_exit+0x20/0x20 [ 97.937672] ret_from_fork+0x22/0x30 [ 97.937676] </TASK> v2. fixed "warning: variable 'aq_vec' set but not used" v3. simplified a for loop | ||||
| CVE-2022-50072 | 1 Redhat | 1 Enterprise Linux | 2025-06-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: Fix a use-after-free bug in open If someone cancels the open RPC call, then we must not try to free either the open slot or the layoutget operation arguments, since they are likely still in use by the hung RPC call. | ||||
| CVE-2022-50093 | 1 Redhat | 1 Enterprise Linux | 2025-06-18 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE) KASAN reports: [ 4.668325][ T0] BUG: KASAN: wild-memory-access in dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497) [ 4.676149][ T0] Read of size 8 at addr 1fffffff85115558 by task swapper/0/0 [ 4.683454][ T0] [ 4.685638][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc3-00004-g0e862838f290 #1 [ 4.694331][ T0] Hardware name: Supermicro SYS-5018D-FN4T/X10SDV-8C-TLN4F, BIOS 1.1 03/02/2016 [ 4.703196][ T0] Call Trace: [ 4.706334][ T0] <TASK> [ 4.709133][ T0] ? dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497) after converting the type of the first argument (@nr, bit number) of arch_test_bit() from `long` to `unsigned long`[0]. Under certain conditions (for example, when ACPI NUMA is disabled via command line), pxm_to_node() can return %NUMA_NO_NODE (-1). It is valid 'magic' number of NUMA node, but not valid bit number to use in bitops. node_online() eventually descends to test_bit() without checking for the input, assuming it's on caller side (which might be good for perf-critical tasks). There, -1 becomes %ULONG_MAX which leads to an insane array index when calculating bit position in memory. For now, add an explicit check for @node being not %NUMA_NO_NODE before calling test_bit(). The actual logics didn't change here at all. [0] https://github.com/norov/linux/commit/0e862838f290147ea9c16db852d8d494b552d38d | ||||
| CVE-2022-50095 | 1 Redhat | 1 Enterprise Linux | 2025-06-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: Cleanup CPU timers before freeing them during exec Commit 55e8c8eb2c7b ("posix-cpu-timers: Store a reference to a pid not a task") started looking up tasks by PID when deleting a CPU timer. When a non-leader thread calls execve, it will switch PIDs with the leader process. Then, as it calls exit_itimers, posix_cpu_timer_del cannot find the task because the timer still points out to the old PID. That means that armed timers won't be disarmed, that is, they won't be removed from the timerqueue_list. exit_itimers will still release their memory, and when that list is later processed, it leads to a use-after-free. Clean up the timers from the de-threaded task before freeing them. This prevents a reported use-after-free. | ||||