Filtered by vendor Redhat
Subscriptions
Total
22915 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-56128 | 2 Apache, Redhat | 2 Kafka, Amq Streams | 2025-06-20 | 5.3 Medium |
| Incorrect Implementation of Authentication Algorithm in Apache Kafka's SCRAM implementation. Issue Summary: Apache Kafka's implementation of the Salted Challenge Response Authentication Mechanism (SCRAM) did not fully adhere to the requirements of RFC 5802 [1]. Specifically, as per RFC 5802, the server must verify that the nonce sent by the client in the second message matches the nonce sent by the server in its first message. However, Kafka's SCRAM implementation did not perform this validation. Impact: This vulnerability is exploitable only when an attacker has plaintext access to the SCRAM authentication exchange. However, the usage of SCRAM over plaintext is strongly discouraged as it is considered an insecure practice [2]. Apache Kafka recommends deploying SCRAM exclusively with TLS encryption to protect SCRAM exchanges from interception [3]. Deployments using SCRAM with TLS are not affected by this issue. How to Detect If You Are Impacted: If your deployment uses SCRAM authentication over plaintext communication channels (without TLS encryption), you are likely impacted. To check if TLS is enabled, review your server.properties configuration file for listeners property. If you have SASL_PLAINTEXT in the listeners, then you are likely impacted. Fix Details: The issue has been addressed by introducing nonce verification in the final message of the SCRAM authentication exchange to ensure compliance with RFC 5802. Affected Versions: Apache Kafka versions 0.10.2.0 through 3.9.0, excluding the fixed versions below. Fixed Versions: 3.9.0 3.8.1 3.7.2 Users are advised to upgrade to 3.7.2 or later to mitigate this issue. Recommendations for Mitigation: Users unable to upgrade to the fixed versions can mitigate the issue by: - Using TLS with SCRAM Authentication: Always deploy SCRAM over TLS to encrypt authentication exchanges and protect against interception. - Considering Alternative Authentication Mechanisms: Evaluate alternative authentication mechanisms, such as PLAIN, Kerberos or OAuth with TLS, which provide additional layers of security. | ||||
| CVE-2024-23337 | 2 Jqlang, Redhat | 7 Jq, Enterprise Linux, Rhel Aus and 4 more | 2025-06-20 | 4.3 Medium |
| jq is a command-line JSON processor. In versions up to and including 1.7.1, an integer overflow arises when assigning value using an index of 2147483647, the signed integer limit. This causes a denial of service. Commit de21386681c0df0104a99d9d09db23a9b2a78b1e contains a patch for the issue. | ||||
| CVE-2025-48060 | 2 Jqlang, Redhat | 7 Jq, Enterprise Linux, Rhel Aus and 4 more | 2025-06-20 | 7.5 High |
| jq is a command-line JSON processor. In versions up to and including 1.7.1, a heap-buffer-overflow is present in function `jv_string_vfmt` in the jq_fuzz_execute harness from oss-fuzz. This crash happens on file jv.c, line 1456 `void* p = malloc(sz);`. As of time of publication, no patched versions are available. | ||||
| CVE-2025-5278 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-06-20 | 4.4 Medium |
| A flaw was found in GNU Coreutils. The sort utility's begfield() function is vulnerable to a heap buffer under-read. The program may access memory outside the allocated buffer if a user runs a crafted command using the traditional key format. A malicious input could lead to a crash or leak sensitive data. | ||||
| CVE-2025-5222 | 1 Redhat | 2 Enterprise Linux, Openshift | 2025-06-20 | 7 High |
| A stack buffer overflow was found in Internationl components for unicode (ICU ). While running the genrb binary, the 'subtag' struct overflowed at the SRBRoot::addTag function. This issue may lead to memory corruption and local arbitrary code execution. | ||||
| CVE-2024-42459 | 3 Elliptic Project, Indutny, Redhat | 5 Elliptic, Elliptic, Acm and 2 more | 2025-06-20 | 5.3 Medium |
| In the Elliptic package 6.5.6 for Node.js, EDDSA signature malleability occurs because there is a missing signature length check, and thus zero-valued bytes can be removed or appended. | ||||
| CVE-2024-42460 | 3 Elliptic Project, Indutny, Redhat | 5 Elliptic, Elliptic, Acm and 2 more | 2025-06-20 | 5.3 Medium |
| In the Elliptic package 6.5.6 for Node.js, ECDSA signature malleability occurs because there is a missing check for whether the leading bit of r and s is zero. | ||||
| CVE-2023-6129 | 2 Openssl, Redhat | 2 Openssl, Enterprise Linux | 2025-06-20 | 6.5 Medium |
| Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications running on PowerPC CPU based platforms if the CPU provides vector instructions. Impact summary: If an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL for PowerPC CPUs restores the contents of vector registers in a different order than they are saved. Thus the contents of some of these vector registers are corrupted when returning to the caller. The vulnerable code is used only on newer PowerPC processors supporting the PowerISA 2.07 instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However unless the compiler uses the vector registers for storing pointers, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3. If this cipher is enabled on the server a malicious client can influence whether this AEAD cipher is used. This implies that TLS server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue. | ||||
| CVE-2023-40414 | 2 Apple, Redhat | 8 Ipados, Iphone Os, Macos and 5 more | 2025-06-20 | 9.8 Critical |
| A use-after-free issue was addressed with improved memory management. This issue is fixed in watchOS 10, iOS 17 and iPadOS 17, tvOS 17, macOS Sonoma 14, Safari 17. Processing web content may lead to arbitrary code execution. | ||||
| CVE-2025-47947 | 2 Redhat, Trustwave | 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more | 2025-06-20 | 7.5 High |
| ModSecurity is an open source, cross platform web application firewall (WAF) engine for Apache, IIS and Nginx. Versions up to and including 2.9.8 are vulnerable to denial of service in one special case (in stable released versions): when the payload's content type is `application/json`, and there is at least one rule which does a `sanitiseMatchedBytes` action. A patch is available at pull request 3389 and expected to be part of version 2.9.9. No known workarounds are available. | ||||
| CVE-2025-2784 | 2 Gnome, Redhat | 26 Libsoup, Codeready Linux Builder, Codeready Linux Builder For Arm64 and 23 more | 2025-06-20 | 7 High |
| A flaw was found in libsoup. The package is vulnerable to a heap buffer over-read when sniffing content via the skip_insight_whitespace() function. Libsoup clients may read one byte out-of-bounds in response to a crafted HTTP response by an HTTP server. | ||||
| CVE-2025-3155 | 3 Debian, Gnome, Redhat | 25 Debian Linux, Yelp, Codeready Linux Builder and 22 more | 2025-06-20 | 7.4 High |
| A flaw was found in Yelp. The Gnome user help application allows the help document to execute arbitrary scripts. This vulnerability allows malicious users to input help documents, which may exfiltrate user files to an external environment. | ||||
| CVE-2025-5914 | 2 Libarchive, Redhat | 4 Libarchive, Enterprise Linux, Openshift and 1 more | 2025-06-20 | 3.9 Low |
| A vulnerability has been identified in the libarchive library, specifically within the archive_read_format_rar_seek_data() function. This flaw involves an integer overflow that can ultimately lead to a double-free condition. Exploiting a double-free vulnerability can result in memory corruption, enabling an attacker to execute arbitrary code or cause a denial-of-service condition. | ||||
| CVE-2025-2901 | 1 Redhat | 1 Jboss Enterprise Application Platform | 2025-06-20 | 4.6 Medium |
| This vulnerability is redundant to CVE-2025-23366 and CVE-2024-10234. | ||||
| CVE-2024-36022 | 1 Redhat | 1 Enterprise Linux | 2025-06-19 | 4.4 Medium |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2024-7923 | 1 Redhat | 5 Rhui, Satellite, Satellite Capsule and 2 more | 2025-06-19 | 9.8 Critical |
| An authentication bypass vulnerability has been identified in Pulpcore when deployed with Gunicorn versions prior to 22.0, due to the puppet-pulpcore configuration. This issue arises from Apache's mod_proxy not properly unsetting headers because of restrictions on underscores in HTTP headers, allowing authentication through a malformed header. This flaw impacts all active Satellite deployments (6.13, 6.14 and 6.15) which are using Pulpcore version 3.0+ and could potentially enable unauthorized users to gain administrative access. | ||||
| CVE-2024-43911 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-06-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix NULL dereference at band check in starting tx ba session In MLD connection, link_data/link_conf are dynamically allocated. They don't point to vif->bss_conf. So, there will be no chanreq assigned to vif->bss_conf and then the chan will be NULL. Tweak the code to check ht_supported/vht_supported/has_he/has_eht on sta deflink. Crash log (with rtw89 version under MLO development): [ 9890.526087] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 9890.526102] #PF: supervisor read access in kernel mode [ 9890.526105] #PF: error_code(0x0000) - not-present page [ 9890.526109] PGD 0 P4D 0 [ 9890.526114] Oops: 0000 [#1] PREEMPT SMP PTI [ 9890.526119] CPU: 2 PID: 6367 Comm: kworker/u16:2 Kdump: loaded Tainted: G OE 6.9.0 #1 [ 9890.526123] Hardware name: LENOVO 2356AD1/2356AD1, BIOS G7ETB3WW (2.73 ) 11/28/2018 [ 9890.526126] Workqueue: phy2 rtw89_core_ba_work [rtw89_core] [ 9890.526203] RIP: 0010:ieee80211_start_tx_ba_session (net/mac80211/agg-tx.c:618 (discriminator 1)) mac80211 [ 9890.526279] Code: f7 e8 d5 93 3e ea 48 83 c4 28 89 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 49 8b 84 24 e0 f1 ff ff 48 8b 80 90 1b 00 00 <83> 38 03 0f 84 37 fe ff ff bb ea ff ff ff eb cc 49 8b 84 24 10 f3 All code ======== 0: f7 e8 imul %eax 2: d5 (bad) 3: 93 xchg %eax,%ebx 4: 3e ea ds (bad) 6: 48 83 c4 28 add $0x28,%rsp a: 89 d8 mov %ebx,%eax c: 5b pop %rbx d: 41 5c pop %r12 f: 41 5d pop %r13 11: 41 5e pop %r14 13: 41 5f pop %r15 15: 5d pop %rbp 16: c3 retq 17: cc int3 18: cc int3 19: cc int3 1a: cc int3 1b: 49 8b 84 24 e0 f1 ff mov -0xe20(%r12),%rax 22: ff 23: 48 8b 80 90 1b 00 00 mov 0x1b90(%rax),%rax 2a:* 83 38 03 cmpl $0x3,(%rax) <-- trapping instruction 2d: 0f 84 37 fe ff ff je 0xfffffffffffffe6a 33: bb ea ff ff ff mov $0xffffffea,%ebx 38: eb cc jmp 0x6 3a: 49 rex.WB 3b: 8b .byte 0x8b 3c: 84 24 10 test %ah,(%rax,%rdx,1) 3f: f3 repz Code starting with the faulting instruction =========================================== 0: 83 38 03 cmpl $0x3,(%rax) 3: 0f 84 37 fe ff ff je 0xfffffffffffffe40 9: bb ea ff ff ff mov $0xffffffea,%ebx e: eb cc jmp 0xffffffffffffffdc 10: 49 rex.WB 11: 8b .byte 0x8b 12: 84 24 10 test %ah,(%rax,%rdx,1) 15: f3 repz [ 9890.526285] RSP: 0018:ffffb8db09013d68 EFLAGS: 00010246 [ 9890.526291] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9308e0d656c8 [ 9890.526295] RDX: 0000000000000000 RSI: ffffffffab99460b RDI: ffffffffab9a7685 [ 9890.526300] RBP: ffffb8db09013db8 R08: 0000000000000000 R09: 0000000000000873 [ 9890.526304] R10: ffff9308e0d64800 R11: 0000000000000002 R12: ffff9308e5ff6e70 [ 9890.526308] R13: ffff930952500e20 R14: ffff9309192a8c00 R15: 0000000000000000 [ 9890.526313] FS: 0000000000000000(0000) GS:ffff930b4e700000(0000) knlGS:0000000000000000 [ 9890.526316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9890.526318] CR2: 0000000000000000 CR3: 0000000391c58005 CR4: 00000000001706f0 [ 9890.526321] Call Trace: [ 9890.526324] <TASK> [ 9890.526327] ? show_regs (arch/x86/kernel/dumpstack.c:479) [ 9890.526335] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 9890.526340] ? page_fault_oops (arch/x86/mm/fault.c:713) [ 9890.526347] ? search_module_extables (kernel/module/main.c:3256 (discriminator ---truncated--- | ||||
| CVE-2024-35927 | 1 Redhat | 1 Enterprise Linux | 2025-06-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm: Check output polling initialized before disabling In drm_kms_helper_poll_disable() check if output polling support is initialized before disabling polling. If not flag this as a warning. Additionally in drm_mode_config_helper_suspend() and drm_mode_config_helper_resume() calls, that re the callers of these functions, avoid invoking them if polling is not initialized. For drivers like hyperv-drm, that do not initialize connector polling, if suspend is called without this check, it leads to suspend failure with following stack [ 770.719392] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 770.720592] printk: Suspending console(s) (use no_console_suspend to debug) [ 770.948823] ------------[ cut here ]------------ [ 770.948824] WARNING: CPU: 1 PID: 17197 at kernel/workqueue.c:3162 __flush_work.isra.0+0x212/0x230 [ 770.948831] Modules linked in: rfkill nft_counter xt_conntrack xt_owner udf nft_compat crc_itu_t nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink vfat fat mlx5_ib ib_uverbs ib_core mlx5_core intel_rapl_msr intel_rapl_common kvm_amd ccp mlxfw kvm psample hyperv_drm tls drm_shmem_helper drm_kms_helper irqbypass pcspkr syscopyarea sysfillrect sysimgblt hv_balloon hv_utils joydev drm fuse xfs libcrc32c pci_hyperv pci_hyperv_intf sr_mod sd_mod cdrom t10_pi sg hv_storvsc scsi_transport_fc hv_netvsc serio_raw hyperv_keyboard hid_hyperv crct10dif_pclmul crc32_pclmul crc32c_intel hv_vmbus ghash_clmulni_intel dm_mirror dm_region_hash dm_log dm_mod [ 770.948863] CPU: 1 PID: 17197 Comm: systemd-sleep Not tainted 5.14.0-362.2.1.el9_3.x86_64 #1 [ 770.948865] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022 [ 770.948866] RIP: 0010:__flush_work.isra.0+0x212/0x230 [ 770.948869] Code: 8b 4d 00 4c 8b 45 08 89 ca 48 c1 e9 04 83 e2 08 83 e1 0f 83 ca 02 89 c8 48 0f ba 6d 00 03 e9 25 ff ff ff 0f 0b e9 4e ff ff ff <0f> 0b 45 31 ed e9 44 ff ff ff e8 8f 89 b2 00 66 66 2e 0f 1f 84 00 [ 770.948870] RSP: 0018:ffffaf4ac213fb10 EFLAGS: 00010246 [ 770.948871] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8c992857 [ 770.948872] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff9aad82b00330 [ 770.948873] RBP: ffff9aad82b00330 R08: 0000000000000000 R09: ffff9aad87ee3d10 [ 770.948874] R10: 0000000000000200 R11: 0000000000000000 R12: ffff9aad82b00330 [ 770.948874] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 [ 770.948875] FS: 00007ff1b2f6bb40(0000) GS:ffff9aaf37d00000(0000) knlGS:0000000000000000 [ 770.948878] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 770.948878] CR2: 0000555f345cb666 CR3: 00000001462dc005 CR4: 0000000000370ee0 [ 770.948879] Call Trace: [ 770.948880] <TASK> [ 770.948881] ? show_trace_log_lvl+0x1c4/0x2df [ 770.948884] ? show_trace_log_lvl+0x1c4/0x2df [ 770.948886] ? __cancel_work_timer+0x103/0x190 [ 770.948887] ? __flush_work.isra.0+0x212/0x230 [ 770.948889] ? __warn+0x81/0x110 [ 770.948891] ? __flush_work.isra.0+0x212/0x230 [ 770.948892] ? report_bug+0x10a/0x140 [ 770.948895] ? handle_bug+0x3c/0x70 [ 770.948898] ? exc_invalid_op+0x14/0x70 [ 770.948899] ? asm_exc_invalid_op+0x16/0x20 [ 770.948903] ? __flush_work.isra.0+0x212/0x230 [ 770.948905] __cancel_work_timer+0x103/0x190 [ 770.948907] ? _raw_spin_unlock_irqrestore+0xa/0x30 [ 770.948910] drm_kms_helper_poll_disable+0x1e/0x40 [drm_kms_helper] [ 770.948923] drm_mode_config_helper_suspend+0x1c/0x80 [drm_kms_helper] [ 770.948933] ? __pfx_vmbus_suspend+0x10/0x10 [hv_vmbus] [ 770.948942] hyperv_vmbus_suspend+0x17/0x40 [hyperv_drm] [ 770.948944] ? __pfx_vmbus_suspend+0x10/0x10 [hv_vmbus] [ 770.948951] dpm_run_callback+0x4c/0x140 [ 770.948954] __device_suspend_noir ---truncated--- | ||||
| CVE-2024-27410 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2025-06-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject iftype change with mesh ID change It's currently possible to change the mesh ID when the interface isn't yet in mesh mode, at the same time as changing it into mesh mode. This leads to an overwrite of data in the wdev->u union for the interface type it currently has, causing cfg80211_change_iface() to do wrong things when switching. We could probably allow setting an interface to mesh while setting the mesh ID at the same time by doing a different order of operations here, but realistically there's no userspace that's going to do this, so just disallow changes in iftype when setting mesh ID. | ||||
| CVE-2024-26774 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-06-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt Determine if bb_fragments is 0 instead of determining bb_free to eliminate the risk of dividing by zero when the block bitmap is corrupted. | ||||