Filtered by vendor Redhat
Subscriptions
Filtered by product Rhel Eus
Subscriptions
Total
3013 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-5535 | 2 Openssl, Redhat | 7 Openssl, Enterprise Linux, Jboss Core Services and 4 more | 2025-09-01 | 9.1 Critical |
| Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a "no overlap" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available. | ||||
| CVE-2025-7345 | 1 Redhat | 7 Enterprise Linux, Rhel Aus, Rhel E4s and 4 more | 2025-08-31 | 7.5 High |
| A flaw exists in gdk‑pixbuf within the gdk_pixbuf__jpeg_image_load_increment function (io-jpeg.c) and in glib’s g_base64_encode_step (glib/gbase64.c). When processing maliciously crafted JPEG images, a heap buffer overflow can occur during Base64 encoding, allowing out-of-bounds reads from heap memory, potentially causing application crashes or arbitrary code execution. | ||||
| CVE-2024-0567 | 5 Debian, Fedoraproject, Gnu and 2 more | 9 Debian Linux, Fedora, Gnutls and 6 more | 2025-08-31 | 7.5 High |
| A vulnerability was found in GnuTLS, where a cockpit (which uses gnuTLS) rejects a certificate chain with distributed trust. This issue occurs when validating a certificate chain with cockpit-certificate-ensure. This flaw allows an unauthenticated, remote client or attacker to initiate a denial of service attack. | ||||
| CVE-2024-7006 | 2 Libtiff, Redhat | 6 Libtiff, Enterprise Linux, Enterprise Linux For Arm 64 and 3 more | 2025-08-30 | 7.5 High |
| A null pointer dereference flaw was found in Libtiff via `tif_dirinfo.c`. This issue may allow an attacker to trigger memory allocation failures through certain means, such as restricting the heap space size or injecting faults, causing a segmentation fault. This can cause an application crash, eventually leading to a denial of service. | ||||
| CVE-2024-6409 | 1 Redhat | 4 Enterprise Linux, Openshift, Rhel E4s and 1 more | 2025-08-30 | 7 High |
| A race condition vulnerability was discovered in how signals are handled by OpenSSH's server (sshd). If a remote attacker does not authenticate within a set time period, then sshd's SIGALRM handler is called asynchronously. However, this signal handler calls various functions that are not async-signal-safe, for example, syslog(). As a consequence of a successful attack, in the worst case scenario, an attacker may be able to perform a remote code execution (RCE) as an unprivileged user running the sshd server. | ||||
| CVE-2024-45770 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2025-08-30 | 4.4 Medium |
| A vulnerability was found in Performance Co-Pilot (PCP). This flaw can only be exploited if an attacker has access to a compromised PCP system account. The issue is related to the pmpost tool, which is used to log messages in the system. Under certain conditions, it runs with high-level privileges. | ||||
| CVE-2023-3758 | 2 Fedoraproject, Redhat | 25 Fedora, Sssd, Codeready Linux Builder and 22 more | 2025-08-30 | 7.1 High |
| A race condition flaw was found in sssd where the GPO policy is not consistently applied for authenticated users. This may lead to improper authorization issues, granting or denying access to resources inappropriately. | ||||
| CVE-2024-28835 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2025-08-30 | 5 Medium |
| A flaw has been discovered in GnuTLS where an application crash can be induced when attempting to verify a specially crafted .pem bundle using the "certtool --verify-chain" command. | ||||
| CVE-2024-2905 | 1 Redhat | 3 Enterprise Linux, Openshift, Rhel Eus | 2025-08-30 | 6.2 Medium |
| A security vulnerability has been discovered within rpm-ostree, pertaining to the /etc/shadow file in default builds having the world-readable bit enabled. This issue arises from the default permissions being set at a higher level than recommended, potentially exposing sensitive authentication data to unauthorized access. | ||||
| CVE-2024-0914 | 2 Opencryptoki Project, Redhat | 3 Opencryptoki, Enterprise Linux, Rhel Eus | 2025-08-30 | 5.9 Medium |
| A timing side-channel vulnerability has been discovered in the opencryptoki package while processing RSA PKCS#1 v1.5 padded ciphertexts. This flaw could potentially enable unauthorized RSA ciphertext decryption or signing, even without access to the corresponding private key. | ||||
| CVE-2024-0553 | 3 Fedoraproject, Gnu, Redhat | 6 Fedora, Gnutls, Enterprise Linux and 3 more | 2025-08-30 | 7.5 High |
| A vulnerability was found in GnuTLS. The response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from the response times of ciphertexts with correct PKCS#1 v1.5 padding. This issue may allow a remote attacker to perform a timing side-channel attack in the RSA-PSK key exchange, potentially leading to the leakage of sensitive data. CVE-2024-0553 is designated as an incomplete resolution for CVE-2023-5981. | ||||
| CVE-2023-5981 | 3 Fedoraproject, Gnu, Redhat | 7 Fedora, Gnutls, Enterprise Linux and 4 more | 2025-08-30 | 5.9 Medium |
| A vulnerability was found that the response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from response times of ciphertexts with correct PKCS#1 v1.5 padding. | ||||
| CVE-2023-42669 | 2 Redhat, Samba | 10 Enterprise Linux, Enterprise Linux Eus, Enterprise Linux For Ibm Z Systems and 7 more | 2025-08-30 | 6.5 Medium |
| A vulnerability was found in Samba's "rpcecho" development server, a non-Windows RPC server used to test Samba's DCE/RPC stack elements. This vulnerability stems from an RPC function that can be blocked indefinitely. The issue arises because the "rpcecho" service operates with only one worker in the main RPC task, allowing calls to the "rpcecho" server to be blocked for a specified time, causing service disruptions. This disruption is triggered by a "sleep()" call in the "dcesrv_echo_TestSleep()" function under specific conditions. Authenticated users or attackers can exploit this vulnerability to make calls to the "rpcecho" server, requesting it to block for a specified duration, effectively disrupting most services and leading to a complete denial of service on the AD DC. The DoS affects all other services as "rpcecho" runs in the main RPC task. | ||||
| CVE-2023-4091 | 3 Fedoraproject, Redhat, Samba | 7 Fedora, Enterprise Linux, Enterprise Linux Eus and 4 more | 2025-08-30 | 6.5 Medium |
| A vulnerability was discovered in Samba, where the flaw allows SMB clients to truncate files, even with read-only permissions when the Samba VFS module "acl_xattr" is configured with "acl_xattr:ignore system acls = yes". The SMB protocol allows opening files when the client requests read-only access but then implicitly truncates the opened file to 0 bytes if the client specifies a separate OVERWRITE create disposition request. The issue arises in configurations that bypass kernel file system permissions checks, relying solely on Samba's permissions. | ||||
| CVE-2023-4001 | 3 Fedoraproject, Gnu, Redhat | 4 Fedora, Grub2, Enterprise Linux and 1 more | 2025-08-30 | 6.8 Medium |
| An authentication bypass flaw was found in GRUB due to the way that GRUB uses the UUID of a device to search for the configuration file that contains the password hash for the GRUB password protection feature. An attacker capable of attaching an external drive such as a USB stick containing a file system with a duplicate UUID (the same as in the "/boot/" file system) can bypass the GRUB password protection feature on UEFI systems, which enumerate removable drives before non-removable ones. This issue was introduced in a downstream patch in Red Hat's version of grub2 and does not affect the upstream package. | ||||
| CVE-2023-3961 | 3 Fedoraproject, Redhat, Samba | 7 Fedora, Enterprise Linux, Enterprise Linux Eus and 4 more | 2025-08-30 | 9.1 Critical |
| A path traversal vulnerability was identified in Samba when processing client pipe names connecting to Unix domain sockets within a private directory. Samba typically uses this mechanism to connect SMB clients to remote procedure call (RPC) services like SAMR LSA or SPOOLSS, which Samba initiates on demand. However, due to inadequate sanitization of incoming client pipe names, allowing a client to send a pipe name containing Unix directory traversal characters (../). This could result in SMB clients connecting as root to Unix domain sockets outside the private directory. If an attacker or client managed to send a pipe name resolving to an external service using an existing Unix domain socket, it could potentially lead to unauthorized access to the service and consequential adverse events, including compromise or service crashes. | ||||
| CVE-2023-34968 | 4 Debian, Fedoraproject, Redhat and 1 more | 7 Debian Linux, Fedora, Enterprise Linux and 4 more | 2025-08-30 | 5.3 Medium |
| A path disclosure vulnerability was found in Samba. As part of the Spotlight protocol, Samba discloses the server-side absolute path of shares, files, and directories in the results for search queries. This flaw allows a malicious client or an attacker with a targeted RPC request to view the information that is part of the disclosed path. | ||||
| CVE-2023-34967 | 4 Debian, Fedoraproject, Redhat and 1 more | 7 Debian Linux, Fedora, Enterprise Linux and 4 more | 2025-08-30 | 5.3 Medium |
| A Type Confusion vulnerability was found in Samba's mdssvc RPC service for Spotlight. When parsing Spotlight mdssvc RPC packets, one encoded data structure is a key-value style dictionary where the keys are character strings, and the values can be any of the supported types in the mdssvc protocol. Due to a lack of type checking in callers of the dalloc_value_for_key() function, which returns the object associated with a key, a caller may trigger a crash in talloc_get_size() when talloc detects that the passed-in pointer is not a valid talloc pointer. With an RPC worker process shared among multiple client connections, a malicious client or attacker can trigger a process crash in a shared RPC mdssvc worker process, affecting all other clients this worker serves. | ||||
| CVE-2023-34966 | 4 Debian, Fedoraproject, Redhat and 1 more | 7 Debian Linux, Fedora, Enterprise Linux and 4 more | 2025-08-30 | 7.5 High |
| An infinite loop vulnerability was found in Samba's mdssvc RPC service for Spotlight. When parsing Spotlight mdssvc RPC packets sent by the client, the core unmarshalling function sl_unpack_loop() did not validate a field in the network packet that contains the count of elements in an array-like structure. By passing 0 as the count value, the attacked function will run in an endless loop consuming 100% CPU. This flaw allows an attacker to issue a malformed RPC request, triggering an infinite loop, resulting in a denial of service condition. | ||||
| CVE-2022-2127 | 4 Debian, Fedoraproject, Redhat and 1 more | 7 Debian Linux, Fedora, Enterprise Linux and 4 more | 2025-08-30 | 5.9 Medium |
| An out-of-bounds read vulnerability was found in Samba due to insufficient length checks in winbindd_pam_auth_crap.c. When performing NTLM authentication, the client replies to cryptographic challenges back to the server. These replies have variable lengths, and Winbind fails to check the lan manager response length. When Winbind is used for NTLM authentication, a maliciously crafted request can trigger an out-of-bounds read in Winbind, possibly resulting in a crash. | ||||