Filtered by vendor Redhat
Subscriptions
Total
22785 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-52486 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm: Don't unref the same fb many times by mistake due to deadlock handling If we get a deadlock after the fb lookup in drm_mode_page_flip_ioctl() we proceed to unref the fb and then retry the whole thing from the top. But we forget to reset the fb pointer back to NULL, and so if we then get another error during the retry, before the fb lookup, we proceed the unref the same fb again without having gotten another reference. The end result is that the fb will (eventually) end up being freed while it's still in use. Reset fb to NULL once we've unreffed it to avoid doing it again until we've done another fb lookup. This turned out to be pretty easy to hit on a DG2 when doing async flips (and CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y). The first symptom I saw that drm_closefb() simply got stuck in a busy loop while walking the framebuffer list. Fortunately I was able to convince it to oops instead, and from there it was easier to track down the culprit. | ||||
| CVE-2023-52478 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Fix kernel crash on receiver USB disconnect hidpp_connect_event() has *four* time-of-check vs time-of-use (TOCTOU) races when it races with itself. hidpp_connect_event() primarily runs from a workqueue but it also runs on probe() and if a "device-connected" packet is received by the hw when the thread running hidpp_connect_event() from probe() is waiting on the hw, then a second thread running hidpp_connect_event() will be started from the workqueue. This opens the following races (note the below code is simplified): 1. Retrieving + printing the protocol (harmless race): if (!hidpp->protocol_major) { hidpp_root_get_protocol_version() hidpp->protocol_major = response.rap.params[0]; } We can actually see this race hit in the dmesg in the abrt output attached to rhbz#2227968: [ 3064.624215] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected. [ 3064.658184] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected. Testing with extra logging added has shown that after this the 2 threads take turn grabbing the hw access mutex (send_mutex) so they ping-pong through all the other TOCTOU cases managing to hit all of them: 2. Updating the name to the HIDPP name (harmless race): if (hidpp->name == hdev->name) { ... hidpp->name = new_name; } 3. Initializing the power_supply class for the battery (problematic!): hidpp_initialize_battery() { if (hidpp->battery.ps) return 0; probe_battery(); /* Blocks, threads take turns executing this */ hidpp->battery.desc.properties = devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL); hidpp->battery.ps = devm_power_supply_register(&hidpp->hid_dev->dev, &hidpp->battery.desc, cfg); } 4. Creating delayed input_device (potentially problematic): if (hidpp->delayed_input) return; hidpp->delayed_input = hidpp_allocate_input(hdev); The really big problem here is 3. Hitting the race leads to the following sequence: hidpp->battery.desc.properties = devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL); hidpp->battery.ps = devm_power_supply_register(&hidpp->hid_dev->dev, &hidpp->battery.desc, cfg); ... hidpp->battery.desc.properties = devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL); hidpp->battery.ps = devm_power_supply_register(&hidpp->hid_dev->dev, &hidpp->battery.desc, cfg); So now we have registered 2 power supplies for the same battery, which looks a bit weird from userspace's pov but this is not even the really big problem. Notice how: 1. This is all devm-maganaged 2. The hidpp->battery.desc struct is shared between the 2 power supplies 3. hidpp->battery.desc.properties points to the result from the second devm_kmemdup() This causes a use after free scenario on USB disconnect of the receiver: 1. The last registered power supply class device gets unregistered 2. The memory from the last devm_kmemdup() call gets freed, hidpp->battery.desc.properties now points to freed memory 3. The first registered power supply class device gets unregistered, this involves sending a remove uevent to userspace which invokes power_supply_uevent() to fill the uevent data 4. power_supply_uevent() uses hidpp->battery.desc.properties which now points to freed memory leading to backtraces like this one: Sep 22 20:01:35 eric kernel: BUG: unable to handle page fault for address: ffffb2140e017f08 ... Sep 22 20:01:35 eric kernel: Workqueue: usb_hub_wq hub_event Sep 22 20:01:35 eric kernel: RIP: 0010:power_supply_uevent+0xee/0x1d0 ... Sep 22 20:01:35 eric kernel: ? asm_exc_page_fault+0x26/0x30 Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0xee/0x1d0 Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0x10d/0x1d0 Sep 22 20:01:35 eric kernel: dev_uevent+0x10f/0x2d0 Sep 22 20:01:35 eric kernel: kobject_uevent_env+0x291/0x680 Sep 22 20:01:35 eric kernel: ---truncated--- | ||||
| CVE-2023-52477 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: hub: Guard against accesses to uninitialized BOS descriptors Many functions in drivers/usb/core/hub.c and drivers/usb/core/hub.h access fields inside udev->bos without checking if it was allocated and initialized. If usb_get_bos_descriptor() fails for whatever reason, udev->bos will be NULL and those accesses will result in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 5 PID: 17818 Comm: kworker/5:1 Tainted: G W 5.15.108-18910-gab0e1cb584e1 #1 <HASH:1f9e 1> Hardware name: Google Kindred/Kindred, BIOS Google_Kindred.12672.413.0 02/03/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:hub_port_reset+0x193/0x788 Code: 89 f7 e8 20 f7 15 00 48 8b 43 08 80 b8 96 03 00 00 03 75 36 0f b7 88 92 03 00 00 81 f9 10 03 00 00 72 27 48 8b 80 a8 03 00 00 <48> 83 78 18 00 74 19 48 89 df 48 8b 75 b0 ba 02 00 00 00 4c 89 e9 RSP: 0018:ffffab740c53fcf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa1bc5f678000 RCX: 0000000000000310 RDX: fffffffffffffdff RSI: 0000000000000286 RDI: ffffa1be9655b840 RBP: ffffab740c53fd70 R08: 00001b7d5edaa20c R09: ffffffffb005e060 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: ffffab740c53fd3e R14: 0000000000000032 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa1be96540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000022e80c005 CR4: 00000000003706e0 Call Trace: hub_event+0x73f/0x156e ? hub_activate+0x5b7/0x68f process_one_work+0x1a2/0x487 worker_thread+0x11a/0x288 kthread+0x13a/0x152 ? process_one_work+0x487/0x487 ? kthread_associate_blkcg+0x70/0x70 ret_from_fork+0x1f/0x30 Fall back to a default behavior if the BOS descriptor isn't accessible and skip all the functionalities that depend on it: LPM support checks, Super Speed capabilitiy checks, U1/U2 states setup. | ||||
| CVE-2023-52476 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/lbr: Filter vsyscall addresses We found that a panic can occur when a vsyscall is made while LBR sampling is active. If the vsyscall is interrupted (NMI) for perf sampling, this call sequence can occur (most recent at top): __insn_get_emulate_prefix() insn_get_emulate_prefix() insn_get_prefixes() insn_get_opcode() decode_branch_type() get_branch_type() intel_pmu_lbr_filter() intel_pmu_handle_irq() perf_event_nmi_handler() Within __insn_get_emulate_prefix() at frame 0, a macro is called: peek_nbyte_next(insn_byte_t, insn, i) Within this macro, this dereference occurs: (insn)->next_byte Inspecting registers at this point, the value of the next_byte field is the address of the vsyscall made, for example the location of the vsyscall version of gettimeofday() at 0xffffffffff600000. The access to an address in the vsyscall region will trigger an oops due to an unhandled page fault. To fix the bug, filtering for vsyscalls can be done when determining the branch type. This patch will return a "none" branch if a kernel address if found to lie in the vsyscall region. | ||||
| CVE-2023-52475 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: powermate - fix use-after-free in powermate_config_complete syzbot has found a use-after-free bug [1] in the powermate driver. This happens when the device is disconnected, which leads to a memory free from the powermate_device struct. When an asynchronous control message completes after the kfree and its callback is invoked, the lock does not exist anymore and hence the bug. Use usb_kill_urb() on pm->config to cancel any in-progress requests upon device disconnection. [1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e | ||||
| CVE-2023-52473 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix NULL pointer dereference in zone registration error path If device_register() in thermal_zone_device_register_with_trips() returns an error, the tz variable is set to NULL and subsequently dereferenced in kfree(tz->tzp). Commit adc8749b150c ("thermal/drivers/core: Use put_device() if device_register() fails") added the tz = NULL assignment in question to avoid a possible double-free after dropping the reference to the zone device. However, after commit 4649620d9404 ("thermal: core: Make thermal_zone_device_unregister() return after freeing the zone"), that assignment has become redundant, because dropping the reference to the zone device does not cause the zone object to be freed any more. Drop it to address the NULL pointer dereference. | ||||
| CVE-2023-52471 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ice: Fix some null pointer dereference issues in ice_ptp.c devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. | ||||
| CVE-2023-52470 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/radeon: check the alloc_workqueue return value in radeon_crtc_init() check the alloc_workqueue return value in radeon_crtc_init() to avoid null-ptr-deref. | ||||
| CVE-2023-52469 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drivers/amd/pm: fix a use-after-free in kv_parse_power_table When ps allocated by kzalloc equals to NULL, kv_parse_power_table frees adev->pm.dpm.ps that allocated before. However, after the control flow goes through the following call chains: kv_parse_power_table |-> kv_dpm_init |-> kv_dpm_sw_init |-> kv_dpm_fini The adev->pm.dpm.ps is used in the for loop of kv_dpm_fini after its first free in kv_parse_power_table and causes a use-after-free bug. | ||||
| CVE-2023-52467 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mfd: syscon: Fix null pointer dereference in of_syscon_register() kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. | ||||
| CVE-2023-52464 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/thunderx: Fix possible out-of-bounds string access Enabling -Wstringop-overflow globally exposes a warning for a common bug in the usage of strncat(): drivers/edac/thunderx_edac.c: In function 'thunderx_ocx_com_threaded_isr': drivers/edac/thunderx_edac.c:1136:17: error: 'strncat' specified bound 1024 equals destination size [-Werror=stringop-overflow=] 1136 | strncat(msg, other, OCX_MESSAGE_SIZE); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... 1145 | strncat(msg, other, OCX_MESSAGE_SIZE); ... 1150 | strncat(msg, other, OCX_MESSAGE_SIZE); ... Apparently the author of this driver expected strncat() to behave the way that strlcat() does, which uses the size of the destination buffer as its third argument rather than the length of the source buffer. The result is that there is no check on the size of the allocated buffer. Change it to strlcat(). [ bp: Trim compiler output, fixup commit message. ] | ||||
| CVE-2023-52462 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix check for attempt to corrupt spilled pointer When register is spilled onto a stack as a 1/2/4-byte register, we set slot_type[BPF_REG_SIZE - 1] (plus potentially few more below it, depending on actual spill size). So to check if some stack slot has spilled register we need to consult slot_type[7], not slot_type[0]. To avoid the need to remember and double-check this in the future, just use is_spilled_reg() helper. | ||||
| CVE-2023-52458 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: add check that partition length needs to be aligned with block size Before calling add partition or resize partition, there is no check on whether the length is aligned with the logical block size. If the logical block size of the disk is larger than 512 bytes, then the partition size maybe not the multiple of the logical block size, and when the last sector is read, bio_truncate() will adjust the bio size, resulting in an IO error if the size of the read command is smaller than the logical block size.If integrity data is supported, this will also result in a null pointer dereference when calling bio_integrity_free. | ||||
| CVE-2023-52455 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu: Don't reserve 0-length IOVA region When the bootloader/firmware doesn't setup the framebuffers, their address and size are 0 in "iommu-addresses" property. If IOVA region is reserved with 0 length, then it ends up corrupting the IOVA rbtree with an entry which has pfn_hi < pfn_lo. If we intend to use display driver in kernel without framebuffer then it's causing the display IOMMU mappings to fail as entire valid IOVA space is reserved when address and length are passed as 0. An ideal solution would be firmware removing the "iommu-addresses" property and corresponding "memory-region" if display is not present. But the kernel should be able to handle this by checking for size of IOVA region and skipping the IOVA reservation if size is 0. Also, add a warning if firmware is requesting 0-length IOVA region reservation. | ||||
| CVE-2023-52451 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/memhp: Fix access beyond end of drmem array dlpar_memory_remove_by_index() may access beyond the bounds of the drmem lmb array when the LMB lookup fails to match an entry with the given DRC index. When the search fails, the cursor is left pointing to &drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the last valid entry in the array. The debug message at the end of the function then dereferences this pointer: pr_debug("Failed to hot-remove memory at %llx\n", lmb->base_addr); This was found by inspection and confirmed with KASAN: pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234 ================================================================== BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658 Read of size 8 at addr c000000364e97fd0 by task bash/949 dump_stack_lvl+0xa4/0xfc (unreliable) print_report+0x214/0x63c kasan_report+0x140/0x2e0 __asan_load8+0xa8/0xe0 dlpar_memory+0x298/0x1658 handle_dlpar_errorlog+0x130/0x1d0 dlpar_store+0x18c/0x3e0 kobj_attr_store+0x68/0xa0 sysfs_kf_write+0xc4/0x110 kernfs_fop_write_iter+0x26c/0x390 vfs_write+0x2d4/0x4e0 ksys_write+0xac/0x1a0 system_call_exception+0x268/0x530 system_call_vectored_common+0x15c/0x2ec Allocated by task 1: kasan_save_stack+0x48/0x80 kasan_set_track+0x34/0x50 kasan_save_alloc_info+0x34/0x50 __kasan_kmalloc+0xd0/0x120 __kmalloc+0x8c/0x320 kmalloc_array.constprop.0+0x48/0x5c drmem_init+0x2a0/0x41c do_one_initcall+0xe0/0x5c0 kernel_init_freeable+0x4ec/0x5a0 kernel_init+0x30/0x1e0 ret_from_kernel_user_thread+0x14/0x1c The buggy address belongs to the object at c000000364e80000 which belongs to the cache kmalloc-128k of size 131072 The buggy address is located 0 bytes to the right of allocated 98256-byte region [c000000364e80000, c000000364e97fd0) ================================================================== pseries-hotplug-mem: Failed to hot-remove memory at 0 Log failed lookups with a separate message and dereference the cursor only when it points to a valid entry. | ||||
| CVE-2023-52450 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix NULL pointer dereference issue in upi_fill_topology() Get logical socket id instead of physical id in discover_upi_topology() to avoid out-of-bound access on 'upi = &type->topology[nid][idx];' line that leads to NULL pointer dereference in upi_fill_topology() | ||||
| CVE-2023-52448 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix kernel NULL pointer dereference in gfs2_rgrp_dump Syzkaller has reported a NULL pointer dereference when accessing rgd->rd_rgl in gfs2_rgrp_dump(). This can happen when creating rgd->rd_gl fails in read_rindex_entry(). Add a NULL pointer check in gfs2_rgrp_dump() to prevent that. | ||||
| CVE-2023-52445 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix use after free on context disconnection Upon module load, a kthread is created targeting the pvr2_context_thread_func function, which may call pvr2_context_destroy and thus call kfree() on the context object. However, that might happen before the usb hub_event handler is able to notify the driver. This patch adds a sanity check before the invalid read reported by syzbot, within the context disconnection call stack. | ||||
| CVE-2023-52434 | 3 Debian, Linux, Redhat | 7 Debian Linux, Linux Kernel, Enterprise Linux and 4 more | 2025-05-04 | 8.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential OOBs in smb2_parse_contexts() Validate offsets and lengths before dereferencing create contexts in smb2_parse_contexts(). This fixes following oops when accessing invalid create contexts from server: BUG: unable to handle page fault for address: ffff8881178d8cc3 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 4a01067 P4D 4a01067 PUD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 1736 Comm: mount.cifs Not tainted 6.7.0-rc4 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:smb2_parse_contexts+0xa0/0x3a0 [cifs] Code: f8 10 75 13 48 b8 93 ad 25 50 9c b4 11 e7 49 39 06 0f 84 d2 00 00 00 8b 45 00 85 c0 74 61 41 29 c5 48 01 c5 41 83 fd 0f 76 55 <0f> b7 7d 04 0f b7 45 06 4c 8d 74 3d 00 66 83 f8 04 75 bc ba 04 00 RSP: 0018:ffffc900007939e0 EFLAGS: 00010216 RAX: ffffc90000793c78 RBX: ffff8880180cc000 RCX: ffffc90000793c90 RDX: ffffc90000793cc0 RSI: ffff8880178d8cc0 RDI: ffff8880180cc000 RBP: ffff8881178d8cbf R08: ffffc90000793c22 R09: 0000000000000000 R10: ffff8880180cc000 R11: 0000000000000024 R12: 0000000000000000 R13: 0000000000000020 R14: 0000000000000000 R15: ffffc90000793c22 FS: 00007f873753cbc0(0000) GS:ffff88806bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8881178d8cc3 CR3: 00000000181ca000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x181/0x480 ? search_module_extables+0x19/0x60 ? srso_alias_return_thunk+0x5/0xfbef5 ? exc_page_fault+0x1b6/0x1c0 ? asm_exc_page_fault+0x26/0x30 ? smb2_parse_contexts+0xa0/0x3a0 [cifs] SMB2_open+0x38d/0x5f0 [cifs] ? smb2_is_path_accessible+0x138/0x260 [cifs] smb2_is_path_accessible+0x138/0x260 [cifs] cifs_is_path_remote+0x8d/0x230 [cifs] cifs_mount+0x7e/0x350 [cifs] cifs_smb3_do_mount+0x128/0x780 [cifs] smb3_get_tree+0xd9/0x290 [cifs] vfs_get_tree+0x2c/0x100 ? capable+0x37/0x70 path_mount+0x2d7/0xb80 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __x64_sys_mount+0x11a/0x150 do_syscall_64+0x47/0xf0 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f8737657b1e | ||||
| CVE-2025-21997 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xsk: fix an integer overflow in xp_create_and_assign_umem() Since the i and pool->chunk_size variables are of type 'u32', their product can wrap around and then be cast to 'u64'. This can lead to two different XDP buffers pointing to the same memory area. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. | ||||