Total
35190 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31781 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/ioc32: stop speculation on the drm_compat_ioctl path The drm compat ioctl path takes a user controlled pointer, and then dereferences it into a table of function pointers, the signature method of spectre problems. Fix this up by calling array_index_nospec() on the index to the function pointer list. | ||||
| CVE-2026-43191 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Adjust PHY FSM transition to TX_EN-to-PLL_ON for TMDS on DCN35 [Why] A backport of the change made for DCN401 that addresses an issue where we turn off the PHY PLL when disabling TMDS output, which causes the OTG to remain stuck. The OTG being stuck can lead to a hang in the DCHVM's ability to ACK invalidations when it thinks the HUBP is still on but it's not receiving global sync. The transition to PLL_ON needs to be atomic as there's no guarantee that the thread isn't pre-empted or is able to complete before the IOMMU watchdog times out. [How] Backport the implementation from dcn401 back to dcn35. There's a functional difference in when the eDP output is disabled in dcn401 code so we don't want to utilize it directly. | ||||
| CVE-2025-71254 | 2 Google, Unisoc | 17 Android, Sc7731e, Sc9832e and 14 more | 2026-05-11 | 7.5 High |
| In Modem IMS, there is a possible improper input validation. This could lead to remote denial of service with no additional execution privileges needed. | ||||
| CVE-2026-31773 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: derive legacy responder STK authentication from MITM state The legacy responder path in smp_random() currently labels the stored STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH. That reflects what the local service requested, not what the pairing flow actually achieved. For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear and the resulting STK should remain unauthenticated even if the local side requested HIGH security. Use the established MITM state when storing the responder STK so the key metadata matches the pairing result. This also keeps the legacy path aligned with the Secure Connections code, which already treats JUST_WORKS/JUST_CFM as unauthenticated. | ||||
| CVE-2026-43255 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix WARNING in usb_tx_block The function usb_tx_block() submits cardp->tx_urb without ensuring that any previous transmission on this URB has completed. If a second call occurs while the URB is still active (e.g. during rapid firmware loading), usb_submit_urb() detects the active state and triggers a warning: 'URB submitted while active'. Fix this by enforcing serialization: call usb_kill_urb() before submitting the new request. This ensures the URB is idle and safe to reuse. | ||||
| CVE-2026-6392 | 1 Tanium | 1 Threat Response | 2026-05-11 | 2.7 Low |
| Tanium addressed an information disclosure vulnerability in Threat Response. | ||||
| CVE-2024-41029 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmem: core: limit cell sysfs permissions to main attribute ones The cell sysfs attribute should not provide more access to the nvmem data than the main attribute itself. For example if nvme_config::root_only was set, the cell attribute would still provide read access to everybody. Mask out permissions not available on the main attribute. | ||||
| CVE-2024-40944 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/kexec: Fix bug with call depth tracking The call to cc_platform_has() triggers a fault and system crash if call depth tracking is active because the GS segment has been reset by load_segments() and GS_BASE is now 0 but call depth tracking uses per-CPU variables to operate. Call cc_platform_has() earlier in the function when GS is still valid. [ bp: Massage. ] | ||||
| CVE-2026-43195 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate user queue size constraints Add validation to ensure user queue sizes meet hardware requirements: - Size must be a power of two for efficient ring buffer wrapping - Size must be at least AMDGPU_GPU_PAGE_SIZE to prevent undersized allocations This prevents invalid configurations that could lead to GPU faults or unexpected behavior. | ||||
| CVE-2026-43201 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: APEI/GHES: ARM processor Error: don't go past allocated memory If the BIOS generates a very small ARM Processor Error, or an incomplete one, the current logic will fail to deferrence err->section_length and ctx_info->size Add checks to avoid that. With such changes, such GHESv2 records won't cause OOPSes like this: [ 1.492129] Internal error: Oops: 0000000096000005 [#1] SMP [ 1.495449] Modules linked in: [ 1.495820] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.18.0-rc1-00017-gabadcc3553dd-dirty #18 PREEMPT [ 1.496125] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022 [ 1.496433] Workqueue: kacpi_notify acpi_os_execute_deferred [ 1.496967] pstate: 814000c5 (Nzcv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 1.497199] pc : log_arm_hw_error+0x5c/0x200 [ 1.497380] lr : ghes_handle_arm_hw_error+0x94/0x220 0xffff8000811c5324 is in log_arm_hw_error (../drivers/ras/ras.c:75). 70 err_info = (struct cper_arm_err_info *)(err + 1); 71 ctx_info = (struct cper_arm_ctx_info *)(err_info + err->err_info_num); 72 ctx_err = (u8 *)ctx_info; 73 74 for (n = 0; n < err->context_info_num; n++) { 75 sz = sizeof(struct cper_arm_ctx_info) + ctx_info->size; 76 ctx_info = (struct cper_arm_ctx_info *)((long)ctx_info + sz); 77 ctx_len += sz; 78 } 79 and similar ones while trying to access section_length on an error dump with too small size. [ rjw: Subject tweaks ] | ||||
| CVE-2026-43199 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query Fix a "scheduling while atomic" bug in mlx5e_ipsec_init_macs() by replacing mlx5_query_mac_address() with ether_addr_copy() to get the local MAC address directly from netdev->dev_addr. The issue occurs because mlx5_query_mac_address() queries the hardware which involves mlx5_cmd_exec() that can sleep, but it is called from the mlx5e_ipsec_handle_event workqueue which runs in atomic context. The MAC address is already available in netdev->dev_addr, so no need to query hardware. This avoids the sleeping call and resolves the bug. Call trace: BUG: scheduling while atomic: kworker/u112:2/69344/0x00000200 __schedule+0x7ab/0xa20 schedule+0x1c/0xb0 schedule_timeout+0x6e/0xf0 __wait_for_common+0x91/0x1b0 cmd_exec+0xa85/0xff0 [mlx5_core] mlx5_cmd_exec+0x1f/0x50 [mlx5_core] mlx5_query_nic_vport_mac_address+0x7b/0xd0 [mlx5_core] mlx5_query_mac_address+0x19/0x30 [mlx5_core] mlx5e_ipsec_init_macs+0xc1/0x720 [mlx5_core] mlx5e_ipsec_build_accel_xfrm_attrs+0x422/0x670 [mlx5_core] mlx5e_ipsec_handle_event+0x2b9/0x460 [mlx5_core] process_one_work+0x178/0x2e0 worker_thread+0x2ea/0x430 | ||||
| CVE-2024-35825 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: ncm: Fix handling of zero block length packets While connecting to a Linux host with CDC_NCM_NTB_DEF_SIZE_TX set to 65536, it has been observed that we receive short packets, which come at interval of 5-10 seconds sometimes and have block length zero but still contain 1-2 valid datagrams present. According to the NCM spec: "If wBlockLength = 0x0000, the block is terminated by a short packet. In this case, the USB transfer must still be shorter than dwNtbInMaxSize or dwNtbOutMaxSize. If exactly dwNtbInMaxSize or dwNtbOutMaxSize bytes are sent, and the size is a multiple of wMaxPacketSize for the given pipe, then no ZLP shall be sent. wBlockLength= 0x0000 must be used with extreme care, because of the possibility that the host and device may get out of sync, and because of test issues. wBlockLength = 0x0000 allows the sender to reduce latency by starting to send a very large NTB, and then shortening it when the sender discovers that there’s not sufficient data to justify sending a large NTB" However, there is a potential issue with the current implementation, as it checks for the occurrence of multiple NTBs in a single giveback by verifying if the leftover bytes to be processed is zero or not. If the block length reads zero, we would process the same NTB infintely because the leftover bytes is never zero and it leads to a crash. Fix this by bailing out if block length reads zero. | ||||
| CVE-2026-43194 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: consume xmit errors of GSO frames udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests currently in NIPA. They fail in the same exact way, TCP GRO test stalls occasionally and the test gets killed after 10min. These tests use veth to simulate GRO. They attach a trivial ("return XDP_PASS;") XDP program to the veth to force TSO off and NAPI on. Digging into the failure mode we can see that the connection is completely stuck after a burst of drops. The sender's snd_nxt is at sequence number N [1], but the receiver claims to have received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle is that senders rtx queue is not empty (let's say the block in the rtx queue is at sequence number N - 4 * MSS [3]). In this state, sender sends a retransmission from the rtx queue with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3]. Receiver sees it and responds with an ACK all the way up to N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA because it has no recollection of ever sending data that far out [1]. And we are stuck. The root cause is the mess of the xmit return codes. veth returns an error when it can't xmit a frame. We end up with a loss event like this: ------------------------------------------------- | GSO super frame 1 | GSO super frame 2 | |-----------------------------------------------| | seg | seg | seg | seg | seg | seg | seg | seg | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ------------------------------------------------- x ok ok <ok>| ok ok ok <x> \\ snd_nxt "x" means packet lost by veth, and "ok" means it went thru. Since veth has TSO disabled in this test it sees individual segments. Segment 1 is on the retransmit queue and will be resent. So why did the sender not advance snd_nxt even tho it clearly did send up to seg 8? tcp_write_xmit() interprets the return code from the core to mean that data has not been sent at all. Since TCP deals with GSO super frames, not individual segment the crux of the problem is that loss of a single segment can be interpreted as loss of all. TCP only sees the last return code for the last segment of the GSO frame (in <> brackets in the diagram above). Of course for the problem to occur we need a setup or a device without a Qdisc. Otherwise Qdisc layer disconnects the protocol layer from the device errors completely. We have multiple ways to fix this. 1) make veth not return an error when it lost a packet. While this is what I think we did in the past, the issue keeps reappearing and it's annoying to debug. The game of whack a mole is not great. 2) fix the damn return codes We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the documentation, so maybe we should make the return code from ndo_start_xmit() a boolean. I like that the most, but perhaps some ancient, not-really-networking protocol would suffer. 3) make TCP ignore the errors It is not entirely clear to me what benefit TCP gets from interpreting the result of ip_queue_xmit()? Specifically once the connection is established and we're pushing data - packet loss is just packet loss? 4) this fix Ignore the rc in the Qdisc-less+GSO case, since it's unreliable. We already always return OK in the TCQ_F_CAN_BYPASS case. In the Qdisc-less case let's be a bit more conservative and only mask the GSO errors. This path is taken by non-IP-"networks" like CAN, MCTP etc, so we could regress some ancient thing. This is the simplest, but also maybe the hackiest fix? Similar fix has been proposed by Eric in the past but never committed because original reporter was working with an OOT driver and wasn't providing feedback (see Link). | ||||
| CVE-2026-43200 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink() functions struct configfs_item_operations callbacks are defined like the following: int (*allow_link)(struct config_item *src, struct config_item *target); void (*drop_link)(struct config_item *src, struct config_item *target); While pci_primary_epc_epf_link() and pci_secondary_epc_epf_link() specify the parameters in the correct order, pci_primary_epc_epf_unlink() and pci_secondary_epc_epf_unlink() specify the parameters in the wrong order, leading to the below kernel crash when using the unlink command in configfs: Unable to handle kernel paging request at virtual address 0000000300000857 Mem abort info: ... pc : string+0x54/0x14c lr : vsnprintf+0x280/0x6e8 ... string+0x54/0x14c vsnprintf+0x280/0x6e8 vprintk_default+0x38/0x4c vprintk+0xc4/0xe0 pci_epf_unbind+0xdc/0x108 configfs_unlink+0xe0/0x208+0x44/0x74 vfs_unlink+0x120/0x29c __arm64_sys_unlinkat+0x3c/0x90 invoke_syscall+0x48/0x134 do_el0_svc+0x1c/0x30prop.0+0xd0/0xf0 [mani: cced stable, changed commit message as per https://lore.kernel.org/linux-pci/aV9joi3jF1R6ca02@ryzen] | ||||
| CVE-2026-43202 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: vt8500lcdfb: fix missing dma_free_coherent() fbi->fb.screen_buffer is allocated with dma_alloc_coherent() but is not freed if the error path is reached. | ||||
| CVE-2026-28877 | 1 Apple | 6 Ios And Ipados, Ipados, Iphone Os and 3 more | 2026-05-11 | 5.5 Medium |
| An authorization issue was addressed with improved state management. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.4 and iPadOS 26.4, macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.4, visionOS 26.4, watchOS 26.4. An app may be able to access sensitive user data. | ||||
| CVE-2026-43204 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6asm: drop DSP responses for closed data streams 'Commit a354f030dbce ("ASoC: qcom: q6asm: handle the responses after closing")' attempted to ignore DSP responses arriving after a stream had been closed. However, those responses were still handled, causing lockups. Fix this by unconditionally dropping all DSP responses associated with closed data streams. | ||||
| CVE-2026-43209 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: minix: Add required sanity checking to minix_check_superblock() The fs/minix implementation of the minix filesystem does not currently support any other value for s_log_zone_size than 0. This is also the only value supported in util-linux; see mkfs.minix.c line 511. In addition, this patch adds some sanity checking for the other minix superblock fields, and moves the minix_blocks_needed() checks for the zmap and imap also to minix_check_super_block(). This also closes a related syzbot bug report. | ||||
| CVE-2025-71251 | 2 Google, Unisoc | 17 Android, Sc7731e, Sc9832e and 14 more | 2026-05-11 | 7.5 High |
| In IMS, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed. | ||||
| CVE-2026-43210 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: ring-buffer: Fix to check event length before using Check the event length before adding it for accessing next index in rb_read_data_buffer(). Since this function is used for validating possibly broken ring buffers, the length of the event could be broken. In that case, the new event (e + len) can point a wrong address. To avoid invalid memory access at boot, check whether the length of each event is in the possible range before using it. | ||||