Total
35190 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-5363 | 4 Debian, Netapp, Openssl and 1 more | 16 Debian Linux, H300s, H300s Firmware and 13 more | 2026-05-12 | 7.5 High |
| Issue summary: A bug has been identified in the processing of key and initialisation vector (IV) lengths. This can lead to potential truncation or overruns during the initialisation of some symmetric ciphers. Impact summary: A truncation in the IV can result in non-uniqueness, which could result in loss of confidentiality for some cipher modes. When calling EVP_EncryptInit_ex2(), EVP_DecryptInit_ex2() or EVP_CipherInit_ex2() the provided OSSL_PARAM array is processed after the key and IV have been established. Any alterations to the key length, via the "keylen" parameter or the IV length, via the "ivlen" parameter, within the OSSL_PARAM array will not take effect as intended, potentially causing truncation or overreading of these values. The following ciphers and cipher modes are impacted: RC2, RC4, RC5, CCM, GCM and OCB. For the CCM, GCM and OCB cipher modes, truncation of the IV can result in loss of confidentiality. For example, when following NIST's SP 800-38D section 8.2.1 guidance for constructing a deterministic IV for AES in GCM mode, truncation of the counter portion could lead to IV reuse. Both truncations and overruns of the key and overruns of the IV will produce incorrect results and could, in some cases, trigger a memory exception. However, these issues are not currently assessed as security critical. Changing the key and/or IV lengths is not considered to be a common operation and the vulnerable API was recently introduced. Furthermore it is likely that application developers will have spotted this problem during testing since decryption would fail unless both peers in the communication were similarly vulnerable. For these reasons we expect the probability of an application being vulnerable to this to be quite low. However if an application is vulnerable then this issue is considered very serious. For these reasons we have assessed this issue as Moderate severity overall. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this because the issue lies outside of the FIPS provider boundary. OpenSSL 3.1 and 3.0 are vulnerable to this issue. | ||||
| CVE-2023-46218 | 3 Fedoraproject, Haxx, Redhat | 7 Fedora, Curl, Enterprise Linux and 4 more | 2026-05-12 | 6.5 Medium |
| This flaw allows a malicious HTTP server to set "super cookies" in curl that are then passed back to more origins than what is otherwise allowed or possible. This allows a site to set cookies that then would get sent to different and unrelated sites and domains. It could do this by exploiting a mixed case flaw in curl's function that verifies a given cookie domain against the Public Suffix List (PSL). For example a cookie could be set with `domain=co.UK` when the URL used a lower case hostname `curl.co.uk`, even though `co.uk` is listed as a PSL domain. | ||||
| CVE-2023-38546 | 2 Haxx, Redhat | 6 Libcurl, Enterprise Linux, Jboss Core Services and 3 more | 2026-05-12 | 3.7 Low |
| This flaw allows an attacker to insert cookies at will into a running program using libcurl, if the specific series of conditions are met. libcurl performs transfers. In its API, an application creates "easy handles" that are the individual handles for single transfers. libcurl provides a function call that duplicates en easy handle called [curl_easy_duphandle](https://curl.se/libcurl/c/curl_easy_duphandle.html). If a transfer has cookies enabled when the handle is duplicated, the cookie-enable state is also cloned - but without cloning the actual cookies. If the source handle did not read any cookies from a specific file on disk, the cloned version of the handle would instead store the file name as `none` (using the four ASCII letters, no quotes). Subsequent use of the cloned handle that does not explicitly set a source to load cookies from would then inadvertently load cookies from a file named `none` - if such a file exists and is readable in the current directory of the program using libcurl. And if using the correct file format of course. | ||||
| CVE-2023-28531 | 2 Netapp, Openbsd | 4 Brocade Fabric Operating System, Hci Bootstrap Os, Solidfire Element Os and 1 more | 2026-05-12 | 9.8 Critical |
| ssh-add in OpenSSH before 9.3 adds smartcard keys to ssh-agent without the intended per-hop destination constraints. The earliest affected version is 8.9. | ||||
| CVE-2022-48829 | 2 Linux, Redhat | 4 Linux Kernel, Rhel Aus, Rhel E4s and 1 more | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix NFSv3 SETATTR/CREATE's handling of large file sizes iattr::ia_size is a loff_t, so these NFSv3 procedures must be careful to deal with incoming client size values that are larger than s64_max without corrupting the value. Silently capping the value results in storing a different value than the client passed in which is unexpected behavior, so remove the min_t() check in decode_sattr3(). Note that RFC 1813 permits only the WRITE procedure to return NFS3ERR_FBIG. We believe that NFSv3 reference implementations also return NFS3ERR_FBIG when ia_size is too large. | ||||
| CVE-2026-34430 | 2 Bytedance, Deerflow | 2 Deerflow, Deerflow | 2026-05-12 | 8.8 High |
| ByteDance DeerFlow versions prior to commit 92c7a20 contain a sandbox escape vulnerability in bash tool handling that allows attackers to execute arbitrary commands on the host system by bypassing regex-based validation using shell features such as directory changes and relative paths. Attackers can exploit the incomplete shell semantics modeling to read and modify files outside the sandbox boundary and achieve arbitrary command execution through subprocess invocation with shell interpretation enabled. | ||||
| CVE-2026-28870 | 1 Apple | 7 Ios And Ipados, Ipados, Iphone Os and 4 more | 2026-05-12 | 5.5 Medium |
| An information leakage was addressed with additional validation. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.4 and iPadOS 26.4, macOS Tahoe 26.4, tvOS 26.4, visionOS 26.4, watchOS 26.4. An app may be able to access sensitive user data. | ||||
| CVE-2026-28882 | 1 Apple | 7 Ios And Ipados, Ipados, Iphone Os and 4 more | 2026-05-12 | 4 Medium |
| This issue was addressed with improved checks. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.4 and iPadOS 26.4, macOS Tahoe 26.4, tvOS 26.4, visionOS 26.4, watchOS 26.4. An app may be able to enumerate a user's installed apps. | ||||
| CVE-2026-43108 | 1 Linux | 1 Linux Kernel | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pd-mapper: Fix element length in servreg_loc_pfr_req_ei It looks element length declared in servreg_loc_pfr_req_ei for reason not matching servreg_loc_pfr_req's reason field due which we could observe decoding error on PD crash. qmi_decode_string_elem: String len 81 >= Max Len 65 Fix this by matching with servreg_loc_pfr_req's reason field. | ||||
| CVE-2026-43189 | 1 Linux | 1 Linux Kernel | 2026-05-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-async: Fix error handling on steps after finding a match Once an async connection is found to be matching with an fwnode, a sub-device may be registered (in case it wasn't already), its bound operation is called, ancillary links are created, the async connection is added to the sub-device's list of connections and removed from the global waiting connection list. Further on, the sub-device's possible own notifier is searched for possible additional matches. Fix these specific issues: - If v4l2_async_match_notify() failed before the sub-notifier handling, the async connection was unbound and its entry removed from the sub-device's async connection list. The latter part was also done in v4l2_async_match_notify(). - The async connection's sd field was only set after creating ancillary links in v4l2_async_match_notify(). It was however dereferenced in v4l2_async_unbind_subdev_one(), which was called on error path of v4l2_async_match_notify() failure. | ||||
| CVE-2026-31783 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: amlogic: spifc-a4: unregister ECC engine on probe failure and remove() callback aml_sfc_probe() registers the on-host NAND ECC engine, but teardown was missing from both probe unwind and remove-time cleanup. Add a devm cleanup action after successful registration so nand_ecc_unregister_on_host_hw_engine() runs automatically on probe failures and during device removal. | ||||
| CVE-2026-43188 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: do not propagate page array emplacement errors as batch errors When fscrypt is enabled, move_dirty_folio_in_page_array() may fail because it needs to allocate bounce buffers to store the encrypted versions of each folio. Each folio beyond the first allocates its bounce buffer with GFP_NOWAIT. Failures are common (and expected) under this allocation mode; they should flush (not abort) the batch. However, ceph_process_folio_batch() uses the same `rc` variable for its own return code and for capturing the return codes of its routine calls; failing to reset `rc` back to 0 results in the error being propagated out to the main writeback loop, which cannot actually tolerate any errors here: once `ceph_wbc.pages` is allocated, it must be passed to ceph_submit_write() to be freed. If it survives until the next iteration (e.g. due to the goto being followed), ceph_allocate_page_array()'s BUG_ON() will oops the worker. Note that this failure mode is currently masked due to another bug (addressed next in this series) that prevents multiple encrypted folios from being selected for the same write. For now, just reset `rc` when redirtying the folio to prevent errors in move_dirty_folio_in_page_array() from propagating. Note that move_dirty_folio_in_page_array() is careful never to return errors on the first folio, so there is no need to check for that. After this change, ceph_process_folio_batch() no longer returns errors; its only remaining failure indicator is `locked_pages == 0`, which the caller already handles correctly. | ||||
| CVE-2026-43192 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm mpath: Add missing dm_put_device when failing to get scsi dh name When commit fd81bc5cca8f ("scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()") added code to fail parsing the path if scsi_dh_attached_handler_name() failed with -ENOMEM, it didn't clean up the reference to the path device that had just been taken. Fix this, and steamline the error paths of parse_path() a little. | ||||
| CVE-2026-28826 | 1 Apple | 1 Macos | 2026-05-11 | 4 Medium |
| A logic issue was addressed with improved restrictions. This issue is fixed in macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.4. A malicious app may be able to break out of its sandbox. | ||||
| CVE-2025-38647 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: sar: drop lockdep assertion in rtw89_set_sar_from_acpi The following assertion is triggered on the rtw89 driver startup. It looks meaningless to hold wiphy lock on the early init stage so drop the assertion. WARNING: CPU: 7 PID: 629 at drivers/net/wireless/realtek/rtw89/sar.c:502 rtw89_set_sar_from_acpi+0x365/0x4d0 [rtw89_core] CPU: 7 UID: 0 PID: 629 Comm: (udev-worker) Not tainted 6.15.0+ #29 PREEMPT(lazy) Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN50WW 09/27/2024 RIP: 0010:rtw89_set_sar_from_acpi+0x365/0x4d0 [rtw89_core] Call Trace: <TASK> rtw89_sar_init+0x68/0x2c0 [rtw89_core] rtw89_core_init+0x188e/0x1e50 [rtw89_core] rtw89_pci_probe+0x530/0xb50 [rtw89_pci] local_pci_probe+0xd9/0x190 pci_call_probe+0x183/0x540 pci_device_probe+0x171/0x2c0 really_probe+0x1e1/0x890 __driver_probe_device+0x18c/0x390 driver_probe_device+0x4a/0x120 __driver_attach+0x1a0/0x530 bus_for_each_dev+0x10b/0x190 bus_add_driver+0x2eb/0x540 driver_register+0x1a3/0x3a0 do_one_initcall+0xd5/0x450 do_init_module+0x2cc/0x8f0 init_module_from_file+0xe1/0x150 idempotent_init_module+0x226/0x760 __x64_sys_finit_module+0xcd/0x150 do_syscall_64+0x94/0x380 entry_SYSCALL_64_after_hwframe+0x76/0x7e Found by Linux Verification Center (linuxtesting.org). | ||||
| CVE-2025-38638 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: add a retry logic in net6_rt_notify() inet6_rt_notify() can be called under RCU protection only. This means the route could be changed concurrently and rt6_fill_node() could return -EMSGSIZE. Re-size the skb when this happens and retry, removing one WARN_ON() that syzbot was able to trigger: WARNING: CPU: 3 PID: 6291 at net/ipv6/route.c:6342 inet6_rt_notify+0x475/0x4b0 net/ipv6/route.c:6342 Modules linked in: CPU: 3 UID: 0 PID: 6291 Comm: syz.0.77 Not tainted 6.16.0-rc7-syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:inet6_rt_notify+0x475/0x4b0 net/ipv6/route.c:6342 Code: fc ff ff e8 6d 52 ea f7 e9 47 fc ff ff 48 8b 7c 24 08 4c 89 04 24 e8 5a 52 ea f7 4c 8b 04 24 e9 94 fd ff ff e8 9c fe 84 f7 90 <0f> 0b 90 e9 bd fd ff ff e8 6e 52 ea f7 e9 bb fb ff ff 48 89 df e8 RSP: 0018:ffffc900035cf1d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffffc900035cf540 RCX: ffffffff8a36e790 RDX: ffff88802f7e8000 RSI: ffffffff8a36e9d4 RDI: 0000000000000005 RBP: ffff88803c230f00 R08: 0000000000000005 R09: 00000000ffffffa6 R10: 00000000ffffffa6 R11: 0000000000000001 R12: 00000000ffffffa6 R13: 0000000000000900 R14: ffff888032ea4100 R15: 0000000000000000 FS: 00007fac7b89a6c0(0000) GS:ffff8880d6a20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fac7b899f98 CR3: 0000000034b3f000 CR4: 0000000000352ef0 Call Trace: <TASK> ip6_route_mpath_notify+0xde/0x280 net/ipv6/route.c:5356 ip6_route_multipath_add+0x1181/0x1bd0 net/ipv6/route.c:5536 inet6_rtm_newroute+0xe4/0x1a0 net/ipv6/route.c:5647 rtnetlink_rcv_msg+0x95e/0xe90 net/core/rtnetlink.c:6944 netlink_rcv_skb+0x155/0x420 net/netlink/af_netlink.c:2552 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0x58d/0x850 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] ____sys_sendmsg+0xa95/0xc70 net/socket.c:2566 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2620 | ||||
| CVE-2025-38633 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clk: spacemit: mark K1 pll1_d8 as critical The pll1_d8 clock is enabled by the boot loader, and is ultimately a parent for numerous clocks, including those used by APB and AXI buses. Guodong Xu discovered that this clock got disabled while responding to getting -EPROBE_DEFER when requesting a reset controller. The needed clock (CLK_DMA, along with its parents) had already been enabled. To respond to the probe deferral return, the CLK_DMA clock was disabled, and this led to parent clocks also reducing their enable count. When the enable count for pll1_d8 was decremented it became 0, which caused it to be disabled. This led to a system hang. Marking that clock critical resolves this by preventing it from being disabled. Define a new macro CCU_FACTOR_GATE_DEFINE() to allow clock flags to be supplied for a CCU_FACTOR_GATE clock. | ||||
| CVE-2025-71255 | 2 Google, Unisoc | 17 Android, Sc7731e, Sc9832e and 14 more | 2026-05-11 | 7.5 High |
| In Modem IMS, there is a possible improper input validation. This could lead to remote denial of service with no additional execution privileges needed. | ||||
| CVE-2026-43184 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rnbd-srv: Zero the rsp buffer before using it Before using the data buffer to send back the response message, zero it completely. This prevents any stray bytes to be picked up by the client side when there the message is exchanged between different protocol versions. | ||||
| CVE-2026-43181 | 1 Linux | 1 Linux Kernel | 2026-05-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: sysfs: fix chip removal with GPIOs exported over sysfs Currently if we export a GPIO over sysfs and unbind the parent GPIO controller, the exported attribute will remain under /sys/class/gpio because once we remove the parent device, we can no longer associate the descriptor with it in gpiod_unexport() and never drop the final reference. Rework the teardown code: provide an unlocked variant of gpiod_unexport() and remove all exported GPIOs with the sysfs_lock taken before unregistering the parent device itself. This is done to prevent any new exports happening before we unregister the device completely. | ||||