Filtered by vendor Linux
Subscriptions
Total
14339 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50487 | 1 Linux | 1 Linux Kernel | 2025-10-10 | 7.0 High |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2025-39698 | 1 Linux | 1 Linux Kernel | 2025-10-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/futex: ensure io_futex_wait() cleans up properly on failure The io_futex_data is allocated upfront and assigned to the io_kiocb async_data field, but the request isn't marked with REQ_F_ASYNC_DATA at that point. Those two should always go together, as the flag tells io_uring whether the field is valid or not. Additionally, on failure cleanup, the futex handler frees the data but does not clear ->async_data. Clear the data and the flag in the error path as well. Thanks to Trend Micro Zero Day Initiative and particularly ReDress for reporting this. | ||||
| CVE-2025-38563 | 1 Linux | 1 Linux Kernel | 2025-10-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Prevent VMA split of buffer mappings The perf mmap code is careful about mmap()'ing the user page with the ringbuffer and additionally the auxiliary buffer, when the event supports it. Once the first mapping is established, subsequent mapping have to use the same offset and the same size in both cases. The reference counting for the ringbuffer and the auxiliary buffer depends on this being correct. Though perf does not prevent that a related mapping is split via mmap(2), munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls, which take reference counts, but then the subsequent perf_mmap_close() calls are not longer fulfilling the offset and size checks. This leads to reference count leaks. As perf already has the requirement for subsequent mappings to match the initial mapping, the obvious consequence is that VMA splits, caused by resizing of a mapping or partial unmapping, have to be prevented. Implement the vm_operations_struct::may_split() callback and return unconditionally -EINVAL. That ensures that the mapping offsets and sizes cannot be changed after the fact. Remapping to a different fixed address with the same size is still possible as it takes the references for the new mapping and drops those of the old mapping. | ||||
| CVE-2025-38562 | 1 Linux | 1 Linux Kernel | 2025-10-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference error in generate_encryptionkey If client send two session setups with krb5 authenticate to ksmbd, null pointer dereference error in generate_encryptionkey could happen. sess->Preauth_HashValue is set to NULL if session is valid. So this patch skip generate encryption key if session is valid. | ||||
| CVE-2025-38561 | 1 Linux | 1 Linux Kernel | 2025-10-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix Preauh_HashValue race condition If client send multiple session setup requests to ksmbd, Preauh_HashValue race condition could happen. There is no need to free sess->Preauh_HashValue at session setup phase. It can be freed together with session at connection termination phase. | ||||
| CVE-2022-50455 | 1 Linux | 1 Linux Kernel | 2025-10-10 | 7.0 High |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2024-43831 | 1 Linux | 1 Linux Kernel | 2025-10-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Handle invalid decoder vsi Handle an invalid decoder vsi in vpu_dec_init to ensure the decoder vsi is valid for future use. | ||||
| CVE-2024-43832 | 1 Linux | 1 Linux Kernel | 2025-10-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/uv: Don't call folio_wait_writeback() without a folio reference folio_wait_writeback() requires that no spinlocks are held and that a folio reference is held, as documented. After we dropped the PTL, the folio could get freed concurrently. So grab a temporary reference. | ||||
| CVE-2024-43865 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/fpu: Re-add exception handling in load_fpu_state() With the recent rewrite of the fpu code exception handling for the lfpc instruction within load_fpu_state() was erroneously removed. Add it again to prevent that loading invalid floating point register values cause an unhandled specification exception. | ||||
| CVE-2024-43868 | 1 Linux | 1 Linux Kernel | 2025-10-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv/purgatory: align riscv_kernel_entry When alignment handling is delegated to the kernel, everything must be word-aligned in purgatory, since the trap handler is then set to the kexec one. Without the alignment, hitting the exception would ultimately crash. On other occasions, the kernel's handler would take care of exceptions. This has been tested on a JH7110 SoC with oreboot and its SBI delegating unaligned access exceptions and the kernel configured to handle them. | ||||
| CVE-2022-48880 | 1 Linux | 1 Linux Kernel | 2025-10-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/surface: aggregator: Add missing call to ssam_request_sync_free() Although rare, ssam_request_sync_init() can fail. In that case, the request should be freed via ssam_request_sync_free(). Currently it is leaked instead. Fix this. | ||||
| CVE-2024-43879 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: handle 2x996 RU allocation in cfg80211_calculate_bitrate_he() Currently NL80211_RATE_INFO_HE_RU_ALLOC_2x996 is not handled in cfg80211_calculate_bitrate_he(), leading to below warning: kernel: invalid HE MCS: bw:6, ru:6 kernel: WARNING: CPU: 0 PID: 2312 at net/wireless/util.c:1501 cfg80211_calculate_bitrate_he+0x22b/0x270 [cfg80211] Fix it by handling 2x996 RU allocation in the same way as 160 MHz bandwidth. | ||||
| CVE-2024-43876 | 1 Linux | 1 Linux Kernel | 2025-10-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: rcar: Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup() Avoid large backtrace, it is sufficient to warn the user that there has been a link problem. Either the link has failed and the system is in need of maintenance, or the link continues to work and user has been informed. The message from the warning can be looked up in the sources. This makes an actual link issue less verbose. First of all, this controller has a limitation in that the controller driver has to assist the hardware with transition to L1 link state by writing L1IATN to PMCTRL register, the L1 and L0 link state switching is not fully automatic on this controller. In case of an ASMedia ASM1062 PCIe SATA controller which does not support ASPM, on entry to suspend or during platform pm_test, the SATA controller enters D3hot state and the link enters L1 state. If the SATA controller wakes up before rcar_pcie_wakeup() was called and returns to D0, the link returns to L0 before the controller driver even started its transition to L1 link state. At this point, the SATA controller did send an PM_ENTER_L1 DLLP to the PCIe controller and the PCIe controller received it, and the PCIe controller did set PMSR PMEL1RX bit. Once rcar_pcie_wakeup() is called, if the link is already back in L0 state and PMEL1RX bit is set, the controller driver has no way to determine if it should perform the link transition to L1 state, or treat the link as if it is in L0 state. Currently the driver attempts to perform the transition to L1 link state unconditionally, which in this specific case fails with a PMSR L1FAEG poll timeout, however the link still works as it is already back in L0 state. Reduce this warning verbosity. In case the link is really broken, the rcar_pcie_config_access() would fail, otherwise it will succeed and any system with this controller and ASM1062 can suspend without generating a backtrace. | ||||
| CVE-2025-39960 | 1 Linux | 1 Linux Kernel | 2025-10-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpiolib: acpi: initialize acpi_gpio_info struct Since commit 7c010d463372 ("gpiolib: acpi: Make sure we fill struct acpi_gpio_info"), uninitialized acpi_gpio_info struct are passed to __acpi_find_gpio() and later in the call stack info->quirks is used in acpi_populate_gpio_lookup. This breaks the i2c_hid_cpi driver: [ 58.122916] i2c_hid_acpi i2c-UNIW0001:00: HID over i2c has not been provided an Int IRQ [ 58.123097] i2c_hid_acpi i2c-UNIW0001:00: probe with driver i2c_hid_acpi failed with error -22 Fix this by initializing the acpi_gpio_info pass to __acpi_find_gpio() | ||||
| CVE-2025-39961 | 1 Linux | 1 Linux Kernel | 2025-10-10 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd/pgtbl: Fix possible race while increase page table level The AMD IOMMU host page table implementation supports dynamic page table levels (up to 6 levels), starting with a 3-level configuration that expands based on IOVA address. The kernel maintains a root pointer and current page table level to enable proper page table walks in alloc_pte()/fetch_pte() operations. The IOMMU IOVA allocator initially starts with 32-bit address and onces its exhuasted it switches to 64-bit address (max address is determined based on IOMMU and device DMA capability). To support larger IOVA, AMD IOMMU driver increases page table level. But in unmap path (iommu_v1_unmap_pages()), fetch_pte() reads pgtable->[root/mode] without lock. So its possible that in exteme corner case, when increase_address_space() is updating pgtable->[root/mode], fetch_pte() reads wrong page table level (pgtable->mode). It does compare the value with level encoded in page table and returns NULL. This will result is iommu_unmap ops to fail and upper layer may retry/log WARN_ON. CPU 0 CPU 1 ------ ------ map pages unmap pages alloc_pte() -> increase_address_space() iommu_v1_unmap_pages() -> fetch_pte() pgtable->root = pte (new root value) READ pgtable->[mode/root] Reads new root, old mode Updates mode (pgtable->mode += 1) Since Page table level updates are infrequent and already synchronized with a spinlock, implement seqcount to enable lock-free read operations on the read path. | ||||
| CVE-2025-39962 | 1 Linux | 1 Linux Kernel | 2025-10-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix untrusted unsigned subtract Fix the following Smatch static checker warning: net/rxrpc/rxgk_app.c:65 rxgk_yfs_decode_ticket() warn: untrusted unsigned subtract. 'ticket_len - 10 * 4' by prechecking the length of what we're trying to extract in two places in the token and decoding for a response packet. Also use sizeof() on the struct we're extracting rather specifying the size numerically to be consistent with the other related statements. | ||||
| CVE-2025-39963 | 1 Linux | 1 Linux Kernel | 2025-10-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: fix incorrect io_kiocb reference in io_link_skb In io_link_skb function, there is a bug where prev_notif is incorrectly assigned using 'nd' instead of 'prev_nd'. This causes the context validation check to compare the current notification with itself instead of comparing it with the previous notification. Fix by using the correct prev_nd parameter when obtaining prev_notif. | ||||
| CVE-2024-43830 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-10-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: leds: trigger: Unregister sysfs attributes before calling deactivate() Triggers which have trigger specific sysfs attributes typically store related data in trigger-data allocated by the activate() callback and freed by the deactivate() callback. Calling device_remove_groups() after calling deactivate() leaves a window where the sysfs attributes show/store functions could be called after deactivation and then operate on the just freed trigger-data. Move the device_remove_groups() call to before deactivate() to close this race window. This also makes the deactivation path properly do things in reverse order of the activation path which calls the activate() callback before calling device_add_groups(). | ||||
| CVE-2024-42322 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-10-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: properly dereference pe in ip_vs_add_service Use pe directly to resolve sparse warning: net/netfilter/ipvs/ip_vs_ctl.c:1471:27: warning: dereference of noderef expression | ||||
| CVE-2024-42321 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: flow_dissector: use DEBUG_NET_WARN_ON_ONCE The following splat is easy to reproduce upstream as well as in -stable kernels. Florian Westphal provided the following commit: d1dab4f71d37 ("net: add and use __skb_get_hash_symmetric_net") but this complementary fix has been also suggested by Willem de Bruijn and it can be easily backported to -stable kernel which consists in using DEBUG_NET_WARN_ON_ONCE instead to silence the following splat given __skb_get_hash() is used by the nftables tracing infrastructure to to identify packets in traces. [69133.561393] ------------[ cut here ]------------ [69133.561404] WARNING: CPU: 0 PID: 43576 at net/core/flow_dissector.c:1104 __skb_flow_dissect+0x134f/ [...] [69133.561944] CPU: 0 PID: 43576 Comm: socat Not tainted 6.10.0-rc7+ #379 [69133.561959] RIP: 0010:__skb_flow_dissect+0x134f/0x2ad0 [69133.561970] Code: 83 f9 04 0f 84 b3 00 00 00 45 85 c9 0f 84 aa 00 00 00 41 83 f9 02 0f 84 81 fc ff ff 44 0f b7 b4 24 80 00 00 00 e9 8b f9 ff ff <0f> 0b e9 20 f3 ff ff 41 f6 c6 20 0f 84 e4 ef ff ff 48 8d 7b 12 e8 [69133.561979] RSP: 0018:ffffc90000006fc0 EFLAGS: 00010246 [69133.561988] RAX: 0000000000000000 RBX: ffffffff82f33e20 RCX: ffffffff81ab7e19 [69133.561994] RDX: dffffc0000000000 RSI: ffffc90000007388 RDI: ffff888103a1b418 [69133.562001] RBP: ffffc90000007310 R08: 0000000000000000 R09: 0000000000000000 [69133.562007] R10: ffffc90000007388 R11: ffffffff810cface R12: ffff888103a1b400 [69133.562013] R13: 0000000000000000 R14: ffffffff82f33e2a R15: ffffffff82f33e28 [69133.562020] FS: 00007f40f7131740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000 [69133.562027] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [69133.562033] CR2: 00007f40f7346ee0 CR3: 000000015d200001 CR4: 00000000001706f0 [69133.562040] Call Trace: [69133.562044] <IRQ> [69133.562049] ? __warn+0x9f/0x1a0 [ 1211.841384] ? __skb_flow_dissect+0x107e/0x2860 [...] [ 1211.841496] ? bpf_flow_dissect+0x160/0x160 [ 1211.841753] __skb_get_hash+0x97/0x280 [ 1211.841765] ? __skb_get_hash_symmetric+0x230/0x230 [ 1211.841776] ? mod_find+0xbf/0xe0 [ 1211.841786] ? get_stack_info_noinstr+0x12/0xe0 [ 1211.841798] ? bpf_ksym_find+0x56/0xe0 [ 1211.841807] ? __rcu_read_unlock+0x2a/0x70 [ 1211.841819] nft_trace_init+0x1b9/0x1c0 [nf_tables] [ 1211.841895] ? nft_trace_notify+0x830/0x830 [nf_tables] [ 1211.841964] ? get_stack_info+0x2b/0x80 [ 1211.841975] ? nft_do_chain_arp+0x80/0x80 [nf_tables] [ 1211.842044] nft_do_chain+0x79c/0x850 [nf_tables] | ||||